Reviews Keep Temperature Box

MANITAN Electric Cooler Cigar Humidors for 150 Cigars Humidor Spanish Cedar Wood Shelves Temperature andBuit-in Hygrometer for Gift(25L)

  • Intelligent electronic humidor cigar box: Clear electronic screen can observe the temperature change in the cabinet at any time, and adjust the temperature in time. Note: The humidor is cooled, not heated.
  • Tempered glass for humidors: reduce the effects of external heat and humidity changes. However, the temperature adjustment of the humidor is still slightly affected by the ambient temperature. If the ambient temperature is too low, the temperature in the humidor will drop slightly. Solve the problem of water mist under 70% humidity.
  • Spanish cedar drawers: It are great for keeping humidity in, this wood will keep humidity while adding a desirable smell and flavor.
  • The 360-degree circulating cold air system: Makes the temperature and humidity uniform in the cabinet. The humidity indicator on the cedar drawer reminds you of the humidity inside the cabinet at any time. (Cannot adjust the humidity, but can keep the humidity by adding water to the small box).
  • High-quality after-sales: Package - 25L humidor cabinet (can store up to 150)*1, cedar wood shelve*2, cedar wood drawer*1, acrylic water box*1,small cutter*1. If you have any problem, contact me and it will be resolved.
Check Stock

Herrfilk Electric Lunch Box Food Warmer Portable Food Heater for Car & Home - Leak proof, Lunch Heating Microwave for Truckers with Removable Stainless Steel Container 1.5 L, 110V/12V[Upgraded]

  • ...for heating, now simply plug in and heat up your food with the electric heating lunch box at home/office or in car/truck using the 110/12V power cables. keep constant heating between 60°C and 70°C when plugging in, always serving you a hot meal..
  • 【SAFTY & FAST PTC HEATING TECHNOLOGY】Using PTC original constant temperature heating, low-consumption heat cycle to keep food at a suitable temperature and keep the moisture of the food. It normally takes 30-50 minutes to warm the food, super efficient and energy-saving. (If the food was taken out of the fridge or where the ambient temperature is low, the heating time should be extended appropriately)..
  • 【PACKAGE LIST】Electric lunch box warmer includes: 1x electric lunch box ( 17*10.8*24cm ), 1x insulated lunch carry bag, 1x plastic additional compartment,1x leak-proof seal ring, 1x stainless steel spoon & fork,1x 304 stainless steel inner box, 1x dishcloth, 1x 12V power cord for cars/trucks, 1x 110V for home/office use. Capacity 1.5L..
  • 【LEAK PROOFING】Improved cover design, the cover will not move during use, more tightly covered. Because leak-proof seal ring design is added, it improves the defect of food leakage. Prevent fluid leakage in sloshing car environments..
Check Stock

Upgraded 3D Printer Filament Dryer Box, SUNLU Filament Dehydrator Dry Box, Keep Filament Dry During 3D Printing, Spool Holder,Compatible with 1.75mm, 2.85mm, 3.00mm Filament,Storage Box

  • ...g failure, SUNLU filament dryer box help to dry excess moisture, keep the filament dry, no more brittle PLA, PETG, ABS filament..
  • ②【Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting. SUNLU dryer box can be used as a spool holder. The bearings that hold the filaments are very stable and allow the filament to roll steadily..
  • ③【Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased. It can be more helpful if you live in a humid temperature zone.SUNLU filament dryer box is easy to open and the lid is transparent allowing direct inspection of the length of filament remaining in the box..
  • ④【High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours. Maximum capacity of the drying oven: 210*85 mm, can accommodate filament diameter: 1.75mm/2.85mm/3mm..
  • ⑤【Good After-Sales Service】After-Sales Service and Technical Support are provided. If you have any questions about SUNLU filament de....
Check Stock

Raised Bed and Container Gardening for Advanced Beginners and Beyond: Advanced Gardening Techniques and In-depth Garden Guides for Growing Your Own Vegetables, ... for Beginner and Advanced Gardeners Book 3)

  • ... food with the electric heating lunch box at home/office or in car/truck using the 110/12V power cables. keep constant heating between 60°C and 70°C when plugging in, always serving you a hot meal..
  • 【SAFTY & FAST PTC HEATING TECHNOLOGY】Using PTC original constant temperature heating, low-consumption heat cycle to keep food at a suitable temperature and keep the moisture of the food. It normally takes 30-50 minutes to warm the food, super efficient and energy-saving. (If the food was taken out of the fridge or where the ambient temperature is low, the heating time should be extended appropriately)..
  • 【PACKAGE LIST】Electric lunch box warmer includes: 1x electric lunch box ( 17*10.8*24cm ), 1x insulated lunch carry bag, 1x plastic additional compartment,1x leak-proof seal ring, 1x stainless steel spoon & fork,1x 304 stainless steel inner box, 1x dishcloth, 1x 12V power cord for cars/trucks, 1x 110V for home/office use. Capacity 1.5L..
  • 【LEAK PROOFING】Improved cover design, the cover will not move during use, more tightly covered. Because leak-proof seal ring design is added, it improves the defect of f....
Check Stock

Benooa Electric Lunch Box Food Heater for Car and Home,12V/110V Portable Food Warmer Heating Container 2 In 1 Food-Grade Stainless Steel Food Container with Fork and Spoon for Men/Women,1.5L (Grey01)

  • stylish appearance and portable handle, detachable container, easy to carry and clean . Note: ❣When cleaning, do not wet the power outlet to avoid damaging the lunch box.❣.
  • ❥【Food Grade Materials】 The Electric Lunch Box is made of food grade PP plastic and high quality 304 stainless steel. High temperature resistance, durable, environmentally friendly, completely non-toxic, tasteless, safe and healthy for the human body, you can use it with confidence. In the cold winter, you can enjoy hot food at any time..
  • ❥【Portable Design】 Portable Electric Lunch Box size: 23 x 16 x 9 cm / 9.2 x 6.5 x 4.3 inches, 1.5 L capacity tray.
  • ❥【Special PTC heating technology】PTC energy-saving constant temperature heating element to prevent overheating.Electric Lunch Box and use low-energy heating technology to keep the food at the right temperature and keep the food hydrated.The Portable Electric Lunch Box takes 30 minutes to heat the food(heating time depends on food temperature and room temperature).The power does not turn off automatically when heated.❣The indicator lights up when the lunch box is powered,prove it works.❣.
  • ❥【Perfect Accessories】The package includes stainless steel forks and plastic spoons. For convenience, they have a storag....
Check Stock

DCS 24-Inch 5 Cu. Ft. Outdoor Rated Refrigerator Drawers - RF24DE4

  • 【Anti-slip and stable】: Wear-resistant protective feet, both fishing boxes are equipped with 4 rubber feet, anti-skid and wear-resistant, and stable outdoors..
  • 【Practical switch】: The switch operation is simple and convenient, and the integration of the switch and the fishing box is more beautiful..
  • 【Insulation test】: refrigerate and keep warm for 24 hours, keep warm for 2-3 hours, and keep fresh under 10 degrees with ice pack for 24 hours. The box is filled with freshly baked food and keep it hot for 2-3 hours..
  • 【Application】: easy to carry, outdoor fishing, picnic, mountaineering and camping, family outing and play. Keep heat and cold for a long time to meet your demand for fresh temperature..
  • 【The incubator is efficient and convenient】: the special material inside the incubator can effectively limit the temperature loss, can block sunlight and heat insulation, and is the best package to keep fresh food out..
Check Stock

Yokbeer Lunch Box, Thermal Lunch Box with Temperature Display, with Heat Release Valve, 28oz Leakproof Insulated Bento Box for Kids, Adults（Yellow）

  • Leak-Proof: This insulated lunch containers is made of food grade pp material, the lid is surrounded by a silicone ring seal while the four-sided snap-on switch design, Double efficient sealing ensures that no food or liquid will leak out of the box, but also to better retain the freshness of food..
  • Display Temperature: The unique design of LED intelligent ℃ temperature display makes the lunch box practical and interesting, no need to replace the battery, durable, touch the temperature display above the insulation box, you can always know what the temperature , and they can be heated in the microwave with the lid open..
  • Temperature Insulation : lunch boxes can usually keep food cold for 1~2 hours, for better insulation, it is recommended that the amount of food in the lunch box should be 3/4 of the lunch box, as well as the original temperature of the food placed in the lunch box is sufficient.
  • Easy to Clean: Bento boxes are well made with a smooth surface for easy cleaning, the right size is perfect for kids' school lunch meals, kids won't go home hungry,.
  • Buy worry-free: If it does not meet your expectations or encounter any quality problems, please feel free to contact us, we focus on the quality products and services, and will provide 100% customer....
Check Stock

eSUN eBOX 3D Printing Filament Storage Box, Filament Storage Holder, Spool Holder for 3D Printing Filament Dehydrating, Weighing and Keeping Filaments Dry (US Power Supply)

  • 【eBox Storage Box】Designed to keep filament dry and dehumidify various kind of filaments, especially those moisture sensitive filaments. Provide a dry storage environment for filament..
  • 【Keep Filament Dry】Designed to lay in your filaments and dehumidify to keep them dry. Made of high temperature resistant material, it can bake your filament at a designated temperature for hours. If you have problem in heating , please feel free to turn to us..
  • 【Measure Filament Weight】Freely set the drying heating time, temperature and empty disc weight for your needs. Monitor the temperature gear inside the box and remaining material weight timely..
  • 【Comprehensive Dust-proof】Sealed protection, comprehensive dust-proof, and no impurities. With Special tank for dryer bag and Anti-slip foot pad, which is convenient for recycling..
  • 【Energy Saving】Equipped with LED screen, the light can be turned off automatically to save power. Great companion for any 3D FDM printers.Any problem, please feel free to contact us..
Check Stock

Lunch Box 450ml Bento Box horagutikayo Comic RB3 A

  • A Complete Lunch Box Set - including a 22oz vacuum insulated lunch box that can keep food warm for 4-6 hours, 2 BPA-free food containers, 7oz each, a portable cutlery set of spoon and fork and a lunch bag..
  • Premium Material - the vacuum insulated lunch box is made of SS304, and the food containers are made of food grade plastic. They are eco-friendly, BPA free and non-toxin, which can keep your food fresh for a long period..
  • Satisfying All Your Needs - you can bring hot food, such as fried rice, soup, pasta, together with cold food, such as salad, fruit, veggies or even nuts. This set of lunch box will satisfy all your needs for lunch. You can bring it to work, school, gym, picnic, camping, etc..
  • Superior Temperature Insulation – The vacuum insulation and insulated bag provide up to 6 full hours of warm retention.
  • nearly twice as long as others. NO more cold lunch. NO more microwave. The vacuum insulation provide right temperature to keep food stay warm and healthy. Convenient for you to enjoy tasty homemade food at school or work.
  • Ideal for Portion Control – Wrap it with ribbons, give it to someone you love so they can enjoy home made delicacy for a healthier eating style!.
Check Stock

AMOLEN 3D Printer Filament, PETG Filament 1.75mm PETG Multicolor Rainbow, 3D Printing Filament 1KG/2.2lb

  • 【3D FILAMENT DRYER AND STORAGE】Dry Box is designed to keep filament dry and dehumidify various kind of filaments, Heating during the printing Provide a dry storage environment for 3D printer filament..
  • 【24 HOURS KEEP FILAMENT DRY】The large-area heating block can ensure that the contact area between the filament and the filament is continuously rotated in the dry hot box to remove water. The best bearing, thereby reducing all resistance on the filament of the 3D printer.
  • 【EASY TO USE】The filament drying oven has a 2-inch LCD screen and only two buttons (set temperature and time), the default oven drying time is 6 hours, short press the left button to reduce the drying time. Temperature, short press the right button to increase the temperature..
  • 【MAXIMUM CAPACITY】Support the maximum capacity: Φ210*85(H)mm, and the diameter of consumables line: 1.75mm/2.85mm/3.00mm.The Dry Box is compatible with 99% of 3D printing filaments and 3d printer..
  • 【AVOID INTERRUPTION】 Drying box has a quiet sound even when running, and can be used with various FDM printers. We provide a 6-month warranty for the whole machine, if you have any questions about the operation of the product, please feel free to contact us..
Check Stock