Reviews Kapton Discs

Goldwood Sound GW-206/8 OEM 6.5″ Woofer 180 Watts 8ohm Replacement Speaker

  • ...ill maximize sound quality while minimizing noise and distortion.
  • 60 OZ MAGNET STRUCTURE: Built with 60 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 83.5dB to resonate perfect clarity.
  • 1.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure – sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28″ mounting depth & 8.8″ overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker’s mechanical stability, increasing the life of the speaker.
  • Blue Injection Molded Cone – Flat Progressive Spider – 600 Watt Max Power Handling – Mounting Depth: 4.28”.
  • Non-Fatiguing Big Rubber Suspension – New Wave-Like Rubber Gasket – Impedance:4 O....
Check Stock

3.75'' Titanium Horn Tweeter (Pair) - Aluminum Bullet Diamond Chrome Cutting Finish w/ 300 Watt Peak 20 oz Magnet Structure 2kHz - 25kHz Frequency Response 4 Ohm & 1\ Kapton Voice Coil - Pyle PDBT18

  • 2kHz - 25kHz FREQUENCY RESPONSE: Pyle, 3.75'' aluminum bullet titanium horn tweeter has a 20 oz magnet structure, ferrofluid enhanced voice coil and frequency response. This car speaker is pack with exceptional 99dB (1w/1m) decibel sensitivity.
  • 1'' KAPTON VOICE COIL: Pyle car sound speaker system is capable of 1'' high-temperature kapton voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
  • 150W RMS AND 300W PEAK: This car speaker can provide up to 150 watts RMS or 300 watts peak power because it is 20 oz magnet structure. A pair of round 3.75'' 300 watt tweeters - carrying both the high and low end for a fuller range sound.
  • CHROME CUTTING FINISH: This car speaker super tweeter is diamond chrome cutting finish. The tweeter measures 3.75'' in overall diameter in a mounting depth at 2''. The product includes mylar crossover capacitor.
  • LOUD AND CLEAR: Pyle car speaker super tweeter were carefully combined to reproduce sound clearly with outstanding responsiveness. It features solid construction and accurate power handling ratings.
  • 3.75 Aluminum horn with 1 super bullet tweeter.
Check Stock

2 Inch Car Speaker Tweeter - Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter System w/ Die Cast Aluminum Frame, 2kHz-25 kHz Frequency, 112 dB, 4-8 Ohm, Crossover Capacitor - Pyle PDBT78

  • ...omplete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 112dB/w/m sensitivity and 4-8 ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 2” KAPTON VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. Additional feature includes mylar crossover capacitor.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. Also, feature a diamond chrome cutting finish & die-cast aluminum frame. Easy to install to your vehicle’s sound system w/ 3” mounting depth.
Check Stock

Replacement Speaker Voice Coil - High-Temperature Ferro Fluid Enhanced Kapton Voice Coil For PylePro 3'' Titanium Super Bullet Tweeter PDBT58 Model - Pyle PDBT58

  • 3'' Titanuim Diaphram Super Tweeter - 100 oz. Magnet.
  • 500 Watts RMS / 1000 Watts Peak - 3’’ High Temperature Kapton Voice Coil.
  • Ferro Fluid Enhanced Voice Coil - Mylar Crossover Capacitor Included.
  • Sensitivity: 109dB - Frequency Response: 2kHz~25kHz.
  • 4-8 ohm Impedance - 5'' Diameter - 2'' Mounting Depth.
Check Stock

5Core 6″ inch Subwoofer Replacement Pair DJ Speaker Car Subs Audio 900W PMPO PP Cone Red, 4 Ohm, 8oz Magnet WF 672 PP 2PCS

  • 6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
  • 8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
  • Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
  • Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
  • 5 Core uses highly adhesive in the assembly of the Speake....
Check Stock

Audiopipe Car Audio Package with 4 8 Inch Midwoofer Loudspeakers and 2 3.75 Inch Titanium Pro Tweeters

  • PACKAGE: Audiopipe package includes 4 APMB-8SB-C 8-Inch 250-Watt Low Mid Frequency Loudspeaker and 2 ATR-3721 3.75-inch 350-Watt Titanium Pro Tweeters.
  • LOUDSPEAKER POWER: 250-watt peak power, impedance of 8 ohms, input sensitivity of 99 dB, and frequency response range 350-5000 Hz.
  • LOUDSPEAKER DESIGN: 8-inch cone in steel basket, 20-ounce magnet, with mounting depth at 2.875-inches, and 1.5-inch high temperature Kapton voice coil.
  • TWEETER POWER: 350-watt peak power, impedance of 4-8 ohms, input sensitivity of 99 dB, and frequency response range 2k-25kHz.
  • TWEETER DESIGN: 3.75-inch aluminum horn with 1-inch titanium super bullet tweeter with diamond chrome cutting finish, 20-ounce magnet, Ferro fluid enhanced voice coil, and 1-inch high temperature Kapton voice coil.
Check Stock

Warp Pro – 3D Printer Bed Adhesive Aerosol Glue Spray – Fix 3D Print Warping - No More Glue Sticks - Spray on, Water Washable, Adhesive Solution for All Filament 3D Printer Build Plates

  • Firm Adhesion and Quick Release: Firmly adheres prints to print beds, quickly and easily releases finished prints..
  • 3DLAC aerosol spray is the perfect substitute for Kapton tape, blue tape and other types of 3d printing adhesives. Works on glass, PEI, BuildTak, Kapton, and other common print bed surfaces..
  • Works with PLA, ABS, PETG, HIPS, Nylon, Carbon Fiber, TPU, and other materials..
  • Cost efficient printing - 400ml Aerosol spray (13.52 fl oz).
Check Stock

Car Vehicle Subwoofer Audio Speaker - 8 Inch Blue Injection Molded Cone, Blue Chrome-Plated Steel Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, for Vehicle Stereo Sound System - Pyle PLBW84

  • ...ill maximize sound quality while minimizing noise and distortion.
  • 60 OZ MAGNET STRUCTURE: Built with 60 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 83.5dB to resonate perfect clarity.
  • 1.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28" mounting depth & 8.8" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
  • Blue Injection Molded Cone - Flat Progressive Spider - 600 Watt Max Power Handling - Mounting Depth: 4.28''.
  • Non-Fatiguing Big Rubber Suspension - New Wave-Like Rubber Gasket - Impedance:4 Ohm (Per Coil).
Check Stock

5 CORE 6″ Inch Subwoofer Car Audio 300W Peak Power Sub Woofer Loudspeaker Wide Range High Power Bass Surround Sound Stereo 4 Ohm, 8oz Magnet Car Speakers with PP Cone Red, WF 672 PP

  • 6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
  • 8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
  • Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
  • Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
  • 5 Core uses highly adhesive in the assembly of the Speake....
Check Stock

Car Vehicle Subwoofer Audio Speaker - 12 Inch Blue Injection Molded Cone, Blue Chrome-Plated Steel Basket, Dual Voice Coil 4 Ohm Impedance, 1200W Power, for Vehicle Stereo Sound System - Pyle PL1290BL

  • ... will maximize sound quality while minimizing noise and distortion.
  • 90 OZ MAGNET STRUCTURE: Built with 90 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 85dB to resonate perfect clarity.
  • 2.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 2.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED STEEL BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated steel basket.
  • 7.12” MOUNTING DEPTH: Easy to install w/ 7.12" mounting depth & 12.20" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
  • Powerful vehicle subwoofer with 12-inch injection-molded cone woofer.
  • 2.5-inch high-temperature dual Kapton voice coil and flat progressive spider.
  • Specially treated rubber edge suspension with rubber magnet boot....
Check Stock