Reviews Joint Valve
Fankerba Normally Open Pressure Solenoid Water Valve for Water Air - DC 12V 1/2 / Pure Copper Coils
- This is pressure solenoid valve:it is suitable for tap water supply..
- This is normally open solenoid valve:water will be supplied without electricity, and the solenoid valve will not work after power is turned on..
- It is 67.7mm/2.67 inch length between the two joints.
- it is 69mm/2.7 inch height between the up and down..
- The valve body is plastic and the joint is copper.
Check StockSY66 Automotive Air Conditioning R134A Valve Core High Low Pressure Tool Quick Remover Installer
- Inclosed the high side and low side coupler.
- Excellent for replacing valve cores without discharging or reclaiming the system.
- Built-in ball valve retains charge & allows access to A/C auto systems.
Check StockLAJIAOZ CV Removal Tool,CV Boot Tool,CV Joint Boot Installation Removal Expander Tool
- Compatible With: Vtt, Toyota, Corolla, Audi, BMW, UTV, ATV.
- Material: We use high -quality materials that have been tested many times to ensure the durability and safety of the product.
- Description: This tool can save time, money and prevent CV joint damage. Install CV Joint Boots, no need to disassemble the driver shaft from the vehicle or remove the CV connector from the drive shaft. The composite valve body combined with the simple control valve to send the air from the standard workshop.
- Introduction: When the assembly starts, the tool can be removed from the air pipeline when pressing (eight claws holding the arm) and keeping the pressure until the release button is pressed.
- Note: This product is only suitable for general-purpose dust cover, not special-purpose one.The pressure of the air pump should be at least 7.5..
Check StockMellbree Tire Valve Extensions 8.25 Inch Flexible Schrader Tire Valve Stem Extension with 90 Degree Schrader Tire Valve Stem Extension Adaptor Compatible for Harleys RV Bicycles Motorcycles(2pcs)
- These long flexible tire air valve extenders successfully solved a series of operations such as inability to pump or check air pressure due to....
- The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover.....
- The tire valve extension joint is made of brass, which has strong wear resistance. Equipped with rubber sealing ring and sealing cover, durable. The....
- These tire valve extensions are rubber hoses, flexible and durable, and strong plasticity. With rim clamps, you can work more efficiently, check the....
- These tire valve extensions suitable for most bicycles, motorcycles, strollers, trailers, RVs with standard American tire valves..
Check StockPERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014
- ...lean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
- The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
- This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
- The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engine..
Check StockIRC Standard Motorcycle Tube 80/100-21 HEAVY DUTY
- Two to three times thicker than standard tubes, IRC heavy-duty tubes are incredibly durable, abrasion-resistant and feature great impact-absorption.
Check StockKOHLER K-T14491-3-CP Purist Transfer Valve Trim, Polished Chrome
- Patented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-in.
Check StockIRC Standard Motorcycle Tube 70/100-17 HEAVY DUTY
- Two to three times thicker than standard tubes, IRC heavy-duty tubes are incredibly durable, abrasion-resistant and feature great impact-absorption.
Check StockIRC Tube 110/100-18 Heavy Duty
- Two to three times thicker than standard tubes, IRC heavy-duty tubes are incredibly durable, abrasion-resistant and feature great impact-absorption.
Check StockIRC Standard Motorcycle Tube 110/100-17 HEAVY DUTY
- Two to three times thicker than standard tubes, IRC heavy-duty tubes are incredibly durable, abrasion-resistant and feature great impact-absorption.
Check Stock