Reviews Joint Ends

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Spectre Performance 4719 Chrome Alternator Bracket for Big Block Chevy

  • 5 1/2" Adjustable Tensioning Rod with Ends.
  • Rod Diameter 5/8" Center to Center Adjusted Fully In is 7 1/2" and Fully Out is 9" Eye of Heim.
  • 1 x A-Team Performance 5 1/2" Adjustable Tensioning Rod Heim Joint Alternator Bracket Compatible with Chevrolet SBC BBC Small Block Big Block Chevy....
Check Stock

Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 7/8’’ x 7/8’’ ID, 3/16’’ Keyway, 1000 RPM, 5” Overall Length, 2.5 lb, 133015

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 7/8’’ x 7/8’’ inner diameter, 3/16’’ keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.5 lb..
  • HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations..
  • TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use..
  • FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications..
  • MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile..
Check Stock

Powerbuilt 648692 Tie Rod Puller - 2 Piece Press Screw, Silver

  • Made of drop forged heat treated chrome vanadium steel for strength.
  • Drop forged and heat treated chrome vanadium steel for strength.
  • Fine threaded center screws for maximum torque.
  • Two different length center screws to fit a wider range of vehicles.
Check Stock

DPTOOL Ball Joint Separator Kit Heavy Duty Control Arms Steering Knuckles Tie Rod Ends Remover Tool 22mm 24mm 27mm 31mm 36mm Compatible with BMW/Benz/Land Rover

  • Application: Compatible with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. compatible with Mercedes W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4, A6 lower suspension ball joint.
  • Efficient Removal Ball Joint: Specially for quick and easy removing the ball joint connections, removal of tie rod ends, steering knuckles, and lower control arms to replace a ball joint. If you are doing any type of suspension work, this is a essential too. It makes separating ball joints as easy as a snap.
  • Not Damage Ball Joint Boot : Use this tool instead of the pickle fork. This tool is quieter, takes less effort, and most important of all, it does not damage the ball join boot. A must have if you are working on the suspension and have to separate the ball joint but are not planning on replacing it.
  • Easy To Use: lubricated the threads on this separator and applied turns slowly to the driver screw. the ball joint will violently popped out of the steering knuckle.
Check Stock

HCW 304#Golf Ball Collector pingpongBall Collector，Walnuts Pecans Gatherer，Medium Nut Gatherer

  • Application Range:Suitable for collection spherical objects with diameters of 1.2-2.4 inch (e.g. Baseballs, tennis balls, apples, oranges, etc.).
  • Product Material:Handle Stick: 201. Collector(wire included): 304 stainless steel. Connector Joint: Aluminum..
  • Package List:4 x Handle Sticks, 1 x Collector,1 x Collector Hook,1 x Ball Release Stand, 1 x User Manual.
  • Installation Instruction:A:Grab both ends of the collector hook A, and slightly open it to allow the ends to stick into the nuts on the 2 sides of....
Check Stock

5pcs Front End Service Tool 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit

  • ALL-IN-ONE TOOL KIT - Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm, 1x Pitman Arm Puller, 1x portail custom moded case..
  • COMPATIBLE WITH FOLLOWING VEHICLES - The tool set allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks..
  • HIGH QUALITY - Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms..
  • MULTIFUNCTIONAL USE - Allows for easy removal of the most popular types of pitman arms, tie rods, and ball joints. The press-type ball joint separator allows for ball joint removal without damage to boots and other parts that fork-type removers may cause..
  • PORTABLE CARRY BAG - All-in-one Tool Set in a heavy-duty blow-mold case with handle and latches for secure storage, simpl....
Check Stock

MOTOCOCHE Heavy Duty Ball Joint Separator Kit Steering Knuckle Tie Rod Ends Remover 5 Sizes Forks 22mm 24mm 27mm 31mm 36mm, Adjustable Jaw Range (30mm~56 mm)

  • Product Function--This ball joint service tool allows you to effectively remove ball joint connections, remove tie rod ends, knuckle knuckles and lower control arms to replace a ball joint..
  • High Quality--Made of heavy duty carbon steel, chrome finish, high strength, toughness and will not rust. This compact tool ensure not damage the ball joints and rubber components..
  • Easy to Use--The jaw capacity range is adjustable, from 30mm to 56mm(1.18inch~1.96inch), allowing it to be configured for various stud lengths. Adding a little oil to the screw before use will make it easier for the ball joint to pop out of the steering knuckle and better protect the threads..
  • Wide Application--This Ball Joint Remover Kit compatible with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. Compatible with Benz W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4, A6 lower suspension ball joint..
  • Product List--This kit includes 5 sizes of interchangeable forks(22mm/0.86inch, 24mm/0.94inch, 27mm/1.06inch, 31mm/1.22inch, 36mm/1.41in....
Check Stock

MAGNETJEWELRYSTORE Magnetic Therapy Adjustable Wrist Wrap for Pain Relief

  • MAGNETJEWELRYSTORE's 2-Tone Magnet Therapy Bracelets are crafted using two high power 3000 gauss rare earth therapy magnets..
  • Magnetic therapy is an ancient tradition practiced by millions to help with pain, arthritis, carpal tunnel, migraines, sleeplessness, knee pain, joint pain & many other conditions..
  • The ends contain copper which has been used for over 4,000 years for its health benefits..
  • This bracelet is designed with twisted steel for a sleek look. It is available in three different sizes: small, medium, and large, perfect for most wrist sizes..
  • Includes 1 nickel-free, stainless steel magnetic therapy bracelet with 18 kt. gold plated ends. Unisex for men and women..
Check Stock