Reviews Jessem Router Lift 2 - BestBuyersPro.com

POWERTEC 71392 Trim Router Table

Bundle Includes: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5" Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
Compatibility: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
Double-Sealed Ball Bearing: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
Lift Shafts: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
Sturdy Construction: All the machined components on the Rout-R-Lift II are CNC machined for durability.

Ten-ring set includes the following: blank, 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2", 1-3/4" and 2-1/4".
Feature JessEm's Tab-Lockâ design -- 1/4 turn with your insert wrench (not included) easily locks or releases them..
Ring sizes complement the sizes of the 3 rings that come with all JessEm router lift products.
Includes a convenient storage caddy that will hold 14 rings in total..

Bundle Includes: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
Built-In Locking Mechanism: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.
Compatibility: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system.
Sturdy Construction: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off.
Lift Shafts: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.

The JessEm 02312 Rout-R-Lift II is compatible with the Hitachi M12VC-KM2VC or the .Metabo HPT M12VC router motor only (3.267" Motor Dia).
Features a 9-1/4" x 11-3/4" Phenolic insert plate..
Insert opening accommodates bits up to 3-1/2" in diameter and receives JessEm's reducing ring inserts..
Comes with all mounting and leveling hardware, start pin, hand crank, 3 insert rings (2", 2-1/2", and 1-3/8"), and 1 insert wrench..
Additional insert rings available separately..

JessEm included all you need for a top of the line system which includes the Rout-R-Lift II all new router lift solution..
Includes: Rout-R-Lift II (comes with 3 insert rings, 1-3/8'', 2'', 2-1/2''), Mast-R-Fence III (04400), Mast-R-Top (03006), Rout-R-Table Stand (05005),....
Compatible with Porter Cable 690/890, Bosch 1617/1618, DeWalt 610/618, Craftsman 17543/17540/28190..

Includes JessEm Mast-R-Lift Excel II for most cylinder router motors.
32" x 24" phenolic table with aluminum extruded miter track & T-track.
Extruded aluminum router table fence with fully adjustable fence faces.
Rigid, heavy-duty steel stand with upper and lower stretchers.
Optional Digital Readout Attachment and Pow-R-Tek Remote Power Switch not included.

BUNDLE INCLUDES: JessEm Rout-R-Lift II Router Lift with Microjig GRR-Ripper 3D Pushblock.
COMPATIBILITY: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
DOUBLE-SEALED BALL BEARING: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
LIFT SHAFTS: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
STURDY CONSTRUCTION: All the machined components on the Rout-R-Lift II are CNC machined for durability.

Package includes JessEm 02120 Mast-R-Lift II, 03006 Mast-R-Top, and 04010 Mast-R-Fence II..
Table dimensions: 24 x 32 in. with 9-1/4 x 11-3/4 in. opening for lift..
Table features an extruded aluminum track with a t-slot for standard 1/4-in. hex head bolts or hex nuts and a standard 3/4-in. miter slot..
Fence features a dual track fastening system with adjustable scales that can be set for a zero-reference and fast, repeatable set-ups.
JessEm's unique fence face shimming bars that allow for 1/32 and 1/16 in. offset.
and a dust port that will fit 2-1/4 and 2-1/2 in. hose fittings..
Mast-R-Lift II accommodates the following fixed base routers: Porter Cable 690/890/7518, Bosch 1617/1618, DeWalt 610/616/618, Craftsman 17543/17540/28190, Makita 1101, Hitachi M12VC,/KM12VC, Milwaukee 5626/5615/5616/5619, Rigid R29302..

3/4" thick phenolic material will not warp, sag, swell or corrode.
32" wide router table top is 24" front to back with a centered router opening.
Rabbeted 9-1/4" x 11-3/4" opening supports most standard router plates and lifts.
Extruded aluminum track with 1/4" T-slot and standard 3/4" miter slot.
Underside pre-drilled for JessEm router table fences and steel router table stand.

Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
Suitable for a Variety of Router Tables: Use bar to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 1/20,” which is the distance change of a thread. So you can make exact bit height changes..
After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise centerlines....