Reviews Iso Metric Bubble Flaring Tool

OTC 6502 Master Brake Flaring Tool Kit

Covers single double and bubble type flares.
Single flare standard lines 3/16 inch – 5/8 inch and single flare metric lines 4 millimeters – 14 millimeters.
Double flare standard lines 3/16 inch – 1/2 inch and double flare metric lines 4 millimeters – 10 millimeters.
Bubble flare standard lines 3/16 inch – 1/2 inch and bubble flare metric lines 4.75 millimeters – 10 millimeters.
Kit contains flaring bar, arbor press, adapters, tube cutter, and debarring tool – all in a hard case.

MAKE DOUBLE & BUBBLE FLARES: The ABN Double Flare Kit & Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
Fixed head and angles make clean, precise flares.
Yoke type compressor with T-bar handle for firm grip.
For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
Pull back the blade and revolve the pipe while compressing.
2 rollers prevent skipping and jumping for most consistent tracking.
Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
Includes double flaring and bubble flaring instruct....

Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....

Creates single, double inverted (SAE) flares & bubble (ISO) flares up to 0.040″ wall thickness.
Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing.
Includes flaring dies for sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 4.75mm, 6mm, 8mm, 10mm.
Self-centering yoke has corresponding slots to hold bar assembly tightly in place during flaring.
Contents Include: (1) SAE Forged Alloy Steel Flare Bar, (1) Metric Forged Alloy Steel Flare Bar, (1) Self Centering Premium Yoke, (10) Flare Die Heads, (1) Tubing Reamer 3mm-12mm, (1) Rigid Plastic Storage & Carrying Case.

The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..

Combines features of inline flaring tool and a Hydraulic Flare tool to make a lightweight, low profile, easy to use tool.
Creates single, double and bubble Flares.
Fits into tight access areas allowing on car use.
Flare tubing sizes: SAE: 3/16", 1/4", 5/16", 3/8" metric: 4.75mm, 6mm, 8mm.

Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems.
Flaring bar and all the adapters needed for ISO bubble flaring.
Forged yoke is made of heat-treated steel.

Set includes the Upgraded Hydra-Flare Yoke & Pump Assembly.
45 & Double Flaring Adapters and Die Sets.
Hydra-Flare Yoke & Pump Assembly has been modified with a tube & die set stabilizing arm for easy form tube forming.
Magnetic Adapter holder to keep adapters in place.
Equipped with an Enlarged Die Set Compression Area for better grip of dies.

The Fairmount Hydraulic Flaring Tool Provides The Ability To Produce Repeatable, Perfect, Oe-Precision Brake And Fuel Line Flares In Steel And....
Works On 3/16 in., 1/4 in., 5/16 in., 3/8 in. & 1/2 in. Tubing.
Creates 45 Degrees Single And Double Flares.

Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
GM transmission cooling line 3/8" and 1/2".
Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
Dies have an enlarged compression area to grip the dies better.
Flaring tool set includes a Stabilizing Arm for easy tube forming.