Reviews Ir Kit For Cable Box

3ft 20KHz - 60KHz Universal IR Blaster and Receiver Cable kit, 3.5mm Jack Cable Compatible with DVR HDMI Extender, DVD Player, Blu-ray Player etc.

  • 【Passes IR Communication】-- Used with an IR Repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels.
  • 【20-60KHz Range】-- Wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience..
  • 【High Sensitivity Sensor】-- Easily control DVD player or other HDMI source from remote position up to 10 ft(3m).
  • 【Plug and Play】-- Comes with adhesive backing sticks directly onto different devices,applied to HDMI Extender.
  • IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.
  • 【Great Compatibility】-- With 3.5 mm jack connector, the universal IR cable is supportive for most of audio/video devices such as HDMI Extender ,amplifier, cable box, stereo receiver, satellite TV receiver, CD player, DVD player, Blu-ray player or any other components which is controlled by IR signal(NOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely).
Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
  • Blue LED in IR Receiver bulb verifies the signal transmission.
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
  • Route the infrared remote control extender cable out of sight with a wall mounted TV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • Simple installation of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
  • 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check Stock

CMPLE - IR Emitter Extender Mini Stick-On Infrared Emitters Blink Eye, Remote Control Extension Cable 3.5mm 10 Feet

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check Stock

Infrared Repeater System IR Repeater Kit Control Up to 10 Devices Hidden IR System Infrared Remote Control Extender Kit

  • ...trols up to 10 devices - Expandable to 12 devices.
  • IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.
  • IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet.
  • High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.
  • Note: plasma displays emit IR frequencies during use and may cause interference. It is advised to distance the IT receiver from any plasma TV or display ability t....
Check Stock

SZBJ IR Emitter Extender Cable Extension 3.2 Feet - Dual Head 3.5mm Infrared Red Transmitter Pure Copper Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 2 IR Emitter

  • Passes IR communication: Used with an IR Repeater kit or other electronics has emitter output to control a device.Adhesive backing allows the emitter....
  • 3.2 ft overall length of Infrared Emitter cable between the emitter heads and the mini-plug, extend remote control ability to any room any where in....
  • Control A/V component by the existing IR controller: such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD....
  • Easy to use : Sticks directly onto the AV equipment, and quad Heads allow you to control multiple pieces of equipment with only one IR output..
  • Plug into IR OUT port for use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers..
Check Stock

TNP IR Emitter Extender Extension Cable 10 Feet - 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 1 IR Eye Emitter

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR....
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD....
Check Stock

Sewell Direct BlastIR Wireless Pro Emitter Only Remote Control Extender (IR Emitter),SW-32988-TX

  • Control any IR device from a distance. Blu-Ray Players, Cable and DVR Boxes, AV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal!.
  • 10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another.
  • Included USB and AC power cables, extra IR cables, and mounting adhesive.
  • Warning: Similar products do not support as many devices as the genuine BlastIR Wireless Pro. This kit is the only kit with the compatibility and accessory package that simply works out of the box.
Check Stock

Sewell Direct BlastIR Wireless Pro Receiver Only Remote Control Extender (IR Receiver),SW-32988-RX

  • Control any IR device from a distance. Blu-Ray Players, Cable and DVR Boxes, AV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal!.
  • 10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another.
  • Included USB and AC power cables, extra IR cables, and mounting adhesive.
  • Warning: Similar products do not support as many devices as the genuine BlastIR Wireless Pro. This kit is the only kit with the compatibility and accessory package that simply works out of the box.
Check Stock

TNP IR Emitter Extender Extension Cable (10 Feet) - Quad 4 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
Check Stock

IR Emitter Remote Control Extender Cable, 4 Heads 3.5mm Plug Infrared Red Transmitter Blaster Blink Eye IR Extending Cable for IR Repeater/TV/DVD/Bluray Player/Xbox One (4 Heads, 10FT)

  • PASSES IR communication: used with an IR repeater kit to control a device.
  •  Remote control ability to stretch to any room in the house.
  •  Self-adhesive back allows the spotlights to be attached to the IR eye by a device.
  • Quad heads allow you to control over several pieces of devices with only one IR output.
  •  For use with IR extender extension system, Xbox One, IR connector blocks and home automation controller.
  • The mini stick-on emitter includes a 10 m cable between the emitter heads and the mini-plug.
  • Can you through the existing IR controller, control A / V components such as amplifier, cable box, HD DVR, stereo receiver, SAT TV receiver, CD player, DVD player, BluRay player or other components By IR signal.
Check Stock