Reviews Iot Sensors

Arduino MKR Connector Carrier [ASX00007]

  • Works with any of the Arduino MKR boards: Zero, WiFi, LoRa, Sigfox, GSM, NBIoT, and Vidor..
  • Easily connect up to 14 Seeed Studio’s Grove modules to your MKR board..
  • Ideal for fast projects: plug several modules and go! No soldering required..
  • Screw terminals to safely connect the carrier board to a power source..
  • Connect sensors and actuators to the Arduino IoT Cloud and control them remotely!.
Check Stock

bluSensor® IoT - Remote Monitoring

  • humidity, temperature, dew-point, CO2, TVOC, air pressure, ambient light sensor.
  • alarm notifications via e-mail, sms, voice.
  • other supported cloud provider: IBM Watson IoT, MQTT.
Check Stock

AITRIP 10PCS ESP8266 NodeMCU LUA CH340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython

  • ESP8266 CH340 CH340G NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
  • It's a IOT unit with all available resources on board, support smart link and smart networking..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
Check Stock

Arduino UNO WiFi REV2 [ABX00021]

  • The easiest way to build a connected Arduino project. Works for WiFi and Bluetooth Low Energy applications..
  • Safe wireless connection to the Internet thanks to its onboard cryptochip..
  • Ideal for IoT (Internet of Things) industries such as automotive, agriculture, consumer electronics, smart home projects, or logging data..
  • Includes a 6 axis accelerometer/gyroscope and temperature sensor to accurately measure movement: make step counters, fall sensors, door opening alarms, etc..
  • Communicate directly with your phone or tablet via BLE: send sensor information or build a remote controlled robot!.
Check Stock

Arduino OPLA IOT Kit Cloud IOT Starter Kit

  • ...getting started is easy with only some basic DIY experience. More advanced users can leverage it to customize and hack their smart applications and devices, with full control of their data and processes..
  • It comes with one MKR Wi-Fi 1010 board, one MKR IoT Carrier with a round OLED color display, integrated on-board sensors (temperature, humidity, pressure, and light), two 24 V relays, five capacitive touch buttons, SD card holder, PIR, IMU and moisture sensors, and much more..
  • The includes 12 months FREE access to the Arduino Create Maker Plan - the premium subscription to Arduino online coding platform. Benefit from unlimited compilation time, support for third parties boards, 15 days retention of your data, and a host of more premium features. Manage all of your code online, and access it from wherever you are..
  • The open system enables the development of fully customised smart devices.
  • controlling what you want, how you want to. The kit provides access to 8 out-of-the-box activities + 2 ‘getting to know’ guides, for any user that wants to transform their home into a smart one - build your own modern thermostat, remotely control your lights or water your plants while you’re out of town!.
  • The device can either be powered directly through a US....
Check Stock

OSOYOO Robot Car Starter Kit for Arduino UNO | STEM Remote Controlled App Educational Motorized Robotics for Building Programming Learning How to Code | IOT Mechanical DIY Coding for Kids Teens Adults

  • PROGRAMMABLE LEARNER KIT FOR BEGINNERS AND PROFESSIONALS: The OSOYOO Robot Car Kit V2.0 is compatible with the Arduino UNO R3 board. Great for any skill level — whether you’re a pro, enthusiast, or a beginner, assembling your new robotic car kit will help you learn to create circuits, program sensors and actuators, learn about the Internet of Things (IoT) and get hands-on programming, coding, electronics and robotics experience..
  • THE BEST VALUE PACK ON AMAZON: This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: WiFi Shield, Basic Board for Arduino, USB Cable, Model X Motor Driver Module, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 5 Line Tracking Modules, 2 Obstacle Sensors, Buzzer Sensor Module, Infrared IR Remote, Receiver, & Transmitter, 9V Battery Box, 18650 Battery Box, Voltage Meter, 2 Piece Acrylic Car Chassis, 4 Motors & Metal Motor Holders, 4 Wheels.
  • MORE THAN THE BASICS: ADDITIONAL EDUCATION ACCESSORIES IN DIY ROBOTIC STEM SET: 2 8-Pin Female to Female Jumper Wires (20 cm), 2 20-Pin Male to Female Jumpers (20 cm), 1 Male to 5 Female Jumper Wire, 3-Pin Female to Female Jumper, 6 Pin Male to Female Jumper, Screws & Nuts for Sensor and Modu....
Check Stock

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

ANGEEK 5PCS HC-SR04 to World Ultrasonic Wave Detector Ranging Module for arduino Distance Sensor

  • ... API drivers and technical documents, making system integration fast and simple. The module package supports the reflow soldering process, complies with the RoHS hazardous substance restriction standards, and is fully compatible with various glass covers and appearance designs..
  • Unlike traditional infrared proximity sensors, the color and reflected light of the target object will not affect the distance measurement results. But its effective range and accuracy largely depend on environmental conditions and target characteristics, such as reflectivity and size, and sensor configuration. (The accuracy of the sensor is specified as ±3% at the highest, and it is over ±10% under the next best conditions.).
  • The internal laser emits non-visible light with a wavelength of 940nm, which does not harm the eyes, eliminates the problem of distracting people from emitting red light with other infrared proximity sensors, and enhances the anti-interference performance of external light sources. The sensor's digital architecture and automatic compensation function make it still have a high performance in scenes with high ambient light intensity..
  • The sensing capability of VL53L0X can support various functions, including gesture sensing or proximity of various innovati....
Check Stock

BUD Industries NBF-32026 Plastic ABS NEMA Economy Box with Solid Door, 15-47/64

  • Weatherproof Plastic Utility Enclosure: Heavy duty general purpose weatherproof utility box with lockable hinged door and extra deep gasketed lid. Offers extreme protection for wiring and electronic devices in harsh environments. Meets NEMA 1, 2, 4, 4X, 12, 13 and IP65, IP66 (EIC 529)..
  • Applications: Multi Purpose Plastic Utility Box is ideal for indoor and outdoor use including electronic devices, WiFi equipment, LED controllers and iOT sensors. Also great for low voltage and data wiring, cable TV Connections and more..
  • Durable Industrial Box: molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features an extra deep gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock..
  • Outdoor Wall Mounting Enclosure: Includes Wall Mounting Hardware, Door Locking Key, Cable Grommets, Zip Ties, Cable Management Straps and Clips. It is RF Transparent for Wireless Devices. Weatherproof and UV Stable..
  • Specifications: Material: Light gray Polycarbonate + ABS. External Dimensions: 11.9 x 8.9 x 6.6 Inches (302 x 226 x 168 mm). Internal Dimensions: 11.3 x 8.1 x 5.8 Inches (287 x 206 x 147 mm). UL94-V0 Rated..
Check Stock

GAR Monster Starter Kit for Arduino Uno Mega Nano Complete Advanced Set w/ ESP32 25 Sensor Modules Bluetooth WiFi Ethernet Wireless for Electronics STEM Robotics Projects

  • Advancing the development of robotics technology w/ Earth's 2nd biggest & most advanced starter kit for Arduino. 65+ pieces w/ FIVE main boards: 100%....
  • Explore programming electronics with all of the most common sensors and modules in Arduino like RFID Card-Key Reader, Ultrasonic Sensor, Real Time....
  • Build wireless IoT Automation projects with ESP32 Development Board, HC-05 Bluetooth Module, ESP8266 Wi-Fi Module, 2x NRF24L01 Wireless Transceivers....
  • All-in-one bundle with extra accessories + 16G USB storage with free access to the GAR Dropbox Cloud including PDF guides & links to tutorials and....
  • Effective technical/customer support from USA with lifetime replacement guarantee on all parts – The Monster comes in 16" x 12" durable organizer....
Check Stock