Reviews Internal Scsi Tape Libraries

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
Leverage hardware raid performance with this SATA multi-lane cable.
Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
Supports up to 6Gbs data transfer rate per drive.
DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
Slim ribbon cables minimize airflow impact in a computer case.
Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
Woven mesh sheath covers half of the cable for easy routing.
P1 to P4 markers provide easy ID after installation.
Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....

【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.

Internal Mini SAS data + power cable connects a SAS controller to 4 separate SAS HDD drives.
Forward fanout cable has 1x latching SFF 8087 Mini SAS host connector and 4x discrete SAS target hard drive SFF 8482 connectors.
SCSI controller to SAS cable provides internal computer connectivity between a Serial Attached SCSI controller card host and direct attached storage hard drives.
36 pin SFF-8087 Host connector and 4x SAS 29 pin SFF-8482 data and power Target drive connectors.
DIY or pro installers require a forward fan-out cable with an internal mSAS connector when expanding storage needs for Storage Area Network (SAN) or Direct Attached Storage (DAS) applications.
Sturdy molded connectors provide a secure connection.
Slim ribbon cables in a woven mesh sheath minimize airflow impact in a computer case.
Integrated SATA power supply cables make it easy to see what is connected.
Integrated SATA power supply cables make it easy t....

Internal Mini SAS SFF-8643 to (4) 29pin SFF-8482 connectors with power connecting a SAS controller (SFF-8643) to four SATA/SAS disks (SFF-8482).
Please note that Mini SAS (SFF-8643) is host, 4 SAS 29 (SFF-8482) is target, internal Mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
Before you buy this cable, Please make sure the Mini SAS (SFF-8643) on your motherboard or RAID controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
Mini SAS (SFF-8643) connect to the controller, 4 SAS connect to the HDD (hard disc driver).
30-Day return for any reason, 18-month warranty, Lifetime Technical support and friendly customer service.

Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.

Product Name: SCSI Card 68-80 SCSI hard disk adapter 68 Pin Female to 80 Pin Male (SCSI 80 pin, 68 pin adapter).
SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 80 pin interface to 68 pin interface. In this way, 80 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
SCA 80 Pin to 68. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
Product category: chip level maintenance tools - hard disk maintenance tools - hard disk other tools..

SCSI 2 devices typically use the HPDB50 connector while the wider HPDB68 connector is used for SCSI 3 connections.
You can connect your SCSI 2 and SCSI 3 devices together using this adapter from Monoprice! This adapter features a female HPDB68 connector for connecting to SCSI 3 devices and a male HPDB50 connector for connecting to SCSI 2 devices.
The male end includes side clip release latches and side clips for securing the adapter to a panel connector while the female end includes nuts for securing to a line connector.

SCSI or SUN workstation Cable with Centronics 50 Male to DB50 Male Connectors.
This SCSI RS232 cable connects SCSI to SCSI Devices or SCSI systems to SCSI Devices with a Centronics 50-pin or CN50 Male to Male..