Reviews Internal Boring Tool

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

2\ Boring Head SET 12 Pcs Carbide Boring Bars MT2 -M10 F1-12 50mm Boring Head With 9pcs 12mm Boring Bars Milling Machine Accessories

  • This tool set is made of high quality material, good wear resistance, and durable in use.
  • The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • This tool set contains boring head,Boring Bars, perfect for the milling machine.
Check Stock

Amana Tool 203351 Carbide Tipped Hinge Boring Drill Bit 35mm Dia x 57mm Long x 10mm Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed..
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 35 mm. Overall length (L): 57mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

Amana Tool 203202 Carbide Tipped Hinge Boring Drill Bit 20mm Dia x 70mm Long x 10mm Shank Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed.
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 20 mm. Overall length (L): 70mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

Lutz 15-IN-1-Y Yellow/Black 15-IN-1 Ratchet Screwdriver

  • Material : High Quality HSS, Size: 1/2x1/2x4".
  • Make your own LH, RH, boring, internal threading or form tools.
  • Parallelogram design. High speed steel tool bit for lathe. Used for fabrication of cutting tools for milling, turning, parting, engraving, drilling,....
  • Commonly used on a lathe, a milling machine fly cutter or a metal shaper.
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock