Reviews Intermediate Transom

Partsam 2Pcs LED Stainless Steel Marine Underwater Lights Boat Transom Fishing Squid Lights 6LED Surface Mount

  • Package includes 2 Pieces LED Surface Mount Underwater Boat Lights 316L Stainless Steel, Screws are included.
  • Dimension: The diameter of this transom light is 3-2/3 inches and the Thickness is 2/3 inches. Bean angle is 120 degree. Color LED: Blue.
  • Installation: this boat light come with a 55″ long wire(Black is Ground and red is hot).
  • Please place this marine light on the transom at the lowest possible location about 3″ above the bottom of the boat and make sure the inside of the transom is clear. Only a 3/5″ hole is required to pass the wire through the transom. Can be installed on small to mid-size boats like sport fishers, center console,cruisers and wakeboard boats. Note: The vessel must be hauled out of the water for installation.
  • Waterproof: This under water light is IP 68 Waterproof for long-term immersion and protecting from total dust ingress. Of course you can use it above water.
  • Warranty: We truly offer 1 year warranty! If have any questions or issues about our underwater lights, Please feel free to us and we will reply in 24 hours.
Check Stock

attwood SP-410 Replacement Rubber Shocks Transom Savers

  • Replacement rubber pads for Swivl-Eze transom saver head.
  • Easy to replace when old pads/shocks are damaged or worn.
  • Black rubber, shock absorbing pads to help protect your outboard or drive when trailering..
  • Helps support the weight of the outboard or stern drive unit with trailering or in storage to relieve pressure from the boat transom or engine transom....
Check Stock

Garmin 010-01284-00 Panoptix Transducer - PS30, Down

  • Three Views: LiveVu Down, RealVu 3-D Down and RealVu 3-D Historical.
  • Cable Length: 15 ft. power cable and 30 ft. Ethernet cable.
  • Supported Deadrise/Transom Angles: 0°-70° transom.
  • Includes: PS30 down looking transducer (integrated 30' network cable, 15' power cable), transom mount, split ring RJ-45 connector and documentation.
Check Stock

Extreme Max 3005.3852 Straight Transom Saver with Roller Mount - 21" to 31"

  • Straight boat transom saver mounts over the trailer's rear roller.Fit Type: Universal Fit.
  • Stabilizes motor and power trim to protect transom during trailering.
  • Rated for outboards up to 150 HP, Two-year replacement warranty.
Check Stock

ACTIVE GIFT Boat Launching Wheels Set Boat Transom Launching 12" Wheel

  • Durable Premium Mmaterial: ACTIVE GIFT inflatable boat launch wheels arms are made of durable aluminum alloy with CNC processing. The shiny anodized coating on all aluminum parts provides excellent durability and a long service life..
  • Large Load Capacity: The heavy duty CNC cut bracket is very durable, the 12" boat transom launching wheel can support up to 500 lbs/227 kg. Designed to enable one people launching of an inflatable boat..
  • Easy to Install: The dinghy transom launching wheels set is easy to operate and it can be disassembled effortlessly. Wheels easily lock up when not in use and easily fold down for boat moving..
  • Widely Application: Easily move your boat from water to water with these dinghy launch wheels. Launch wheels fit most boats with a transom, such as Jon boats, dinghy, inflatable boats, mud boats, row boats, sailing dinghies, etc..
Check Stock

Partsam 2Pcs 6 White LED Underwater Boat Lights Boat Transom Fishing Pool Pond Fountain Lights Marine Under Water Dock Lighting Squid Lights Surface Mount Clear Lens with Stainless Steel

  • Package includes 2 Pieces LED Surface Mount Underwater Boat Lights 316L Stainless Steel, Screws are included.
  • Dimension: The diameter of this transom light is 3-2/3 inches and the Thickness is 2/3 inches. Bean angle is 120 degree. Color LED: White.
  • Installation: this boat light come with a 55" long wire(Black is Ground and red is hot).
  • Please place this marine light on the transom at the lowest possible location about 3" above the bottom of the boat and make sure the inside of the transom is clear. Only a 3/5" hole is required to pass the wire through the transom. Can be installed on small to mid-size boats like sport fishers, center console,cruisers and wakeboard boats. Note: The vessel must be hauled out of the water for installation.
  • Waterproof: This under water light is IP 68 Waterproof for long-term immersion and protecting from total dust ingress. Of course you can use it above water.
  • Warranty: We truly offer 1 year warranty! If have any questions or issues about our underwater lights, Please feel free to us and we will reply in 24 hours.
Check Stock

ShoreLand'r 68038 Chrome Lug Nuts Used for Alum

  • Durable Stainless Steel: Our inflatable boat launch wheels arms are made of durable stainless steel with CNC processing, which will hold up even under the most extreme conditions. And the frame arms with anodized coating have features of superior durability and long service life..
  • Large Load Capacity: The boat launching wheels are designed to enable one people launching of an inflatable boat. The weight capacity of the 15"/38.1 cm boat transom launching wheel reaches 300 Lbs/136 kg, making the towing boat a breeze on different road surfaces..
  • Strong Inner Tubes: We thickened the tubes that can holder more heavy boat/yacht, and you don't worry about tubes exploding.
  • Simple Installation: The dinghy transom launching wheels set is easy to operate, saving much time. You need to follow the steps in the picture, and it can be disassembled effortlessly. In addition, the wheel arms kit is small and space-saving..
  • Extensive Application: The inflatable boat transom launching wheel is widely applicable to most boats with a transom, such as Jon boats, dinghy, inflatable boats, mud boats, rowboats, sailing dinghies, etc. The wheels are suitable for grass, hard or soft sand, and dirt..
Check Stock

VEVOR Boat Launching Wheels, 12\ Boat Transom Launching Wheel, 500 LBS Loading Capacity Inflatable Boat Launch Wheels, Aluminium Alloy Transom Launching Dolly Wheels with 4 PCS of Quick Release Pins

  • Large Load Capacity: The boat launching wheels are designed to enable one people launching of an inflatable boat. The weight capacity of the 12"/30.5 cm boat transom launching wheel reaches 500 lbs/227 kg, making the towing boat a breeze on different road surfaces..
  • Durable Aluminum Alloy: Our inflatable boat launch wheels arms are made of durable aluminum alloy with CNC processing, which will hold up even under the most extreme conditions. And the frame arms with anodized coating have features of superior durability and long service life..
  • Quick Release Pins: The transom launching wheels are equipped with 2 pairs of sturdy quick release pins. The accessories play an essential role in angled frame arms' swiveling up and down, making the wheel arms' length adjustable..
  • Simple Installation: The dinghy transom launching wheels set is easy to operate, saving much time. You need to follow the steps in the picture, and it can be disassembled effortlessly. In addition, the wheel arms kit is small and space-saving..
  • Extensive Application: The inflatable boat transom launching wheel is widely applicable to most boats with a transom, such as Jon boats, dinghy, inflatable boats, mud boats, rowboats, sailing dinghies, etc. The wheels are suitable for grass, hard or ....
Check Stock

VEVOR Boat Launching Wheels, 15\ Boat Transom Launching Wheel, 300 LBS Loading Capacity Inflatable Boat Launch Wheels, Aluminum Alloy Transom Launching Dolly Wheels with 4 PCS of Quick Release Pins

  • Large Load Capacity: The boat launching wheels are designed to enable one people launching of an inflatable boat. The weight capacity of the 15"/38.1 cm boat transom launching wheel reaches 300 Lbs/136 kg, making the towing boat a breeze on different road surfaces..
  • Durable Aluminum Alloy: Our inflatable boat launch wheels arms are made of durable aluminum alloy with CNC processing, which will hold up even under the most extreme conditions. And the frame arms with anodized coating have features of superior durability and long service life..
  • Quick Release Pins: The transom launching wheels are equipped with 2 pairs of sturdy quick release pins. The accessories play an essential role in right-angle frame arms' swiveling up and down, making the wheel arms' length adjustable..
  • Simple Installation: The dinghy transom launching wheels set is easy to operate, saving much time. You need to follow the steps in the picture, and it can be disassembled effortlessly. In addition, the wheel arms kit is small and space-saving..
  • Extensive Application: The inflatable boat transom launching wheel is widely applicable to most boats with a transom, such as Jon boats, dinghy, inflatable boats, mud boats, rowboats, sailing dinghies, etc. The wheels are suitable for grass, har....
Check Stock

VEVOR Boat Launching Wheels, 12\ Boat Transom Launching Wheel, 600 LBS Loading Capacity Inflatable Boat Launch Wheels, Aluminium Alloy Transom Launching Dolly Wheels with 4 PCS of Quick Release Pins

  • Large Load Capacity: The boat launching wheels are designed to enable one people launching of an inflatable boat. The weight capacity of the 12"/30.5 cm boat transom launching wheel reaches 600 lbs/272 kg, making the towing boat a breeze on different road surfaces..
  • Durable Aluminum Alloy: Our inflatable boat launch wheels arms are made of durable aluminum alloy with CNC processing, which will hold up even under the most extreme conditions. And the frame arms with anodized coating have features of superior durability and long service life..
  • Quick Release Pins: The transom launching wheels are equipped with 2 pairs of sturdy quick release pins. The accessories play an essential role in right-angle frame arms' swiveling up and down, making the wheel arms' length adjustable..
  • Simple Installation: The dinghy transom launching wheels set is easy to operate, saving much time. You need to follow the steps in the picture, and it can be disassembled effortlessly. In addition, the wheel arms kit is small and space-saving..
  • Extensive Application: The inflatable boat transom launching wheel is widely applicable to most boats with a transom, such as Jon boats, dinghy, inflatable boats, mud boats, rowboats, sailing dinghies, etc. The wheels are suitable for grass, har....
Check Stock