Reviews Intercooler Ice Tank - BestBuyersPro.com

Mishimoto MMINT-RGR-19KBKBK Performance Intercooler Kit, Compatible With Ford Ranger 2.3L EcoBoost 2019+, Black Intercooler, Black Pipes

Direct-fit for 2019+ Ford Ranger 2.3L EcoBoost.
Dyno-proven max gains of 13.6 wheel horsepower and 13.9 lb-ft of torque when combined with Mishimoto intercooler pipes.
Intercooler increases flow by 18.6% over stock intercooler.
Intercooler pipes improve flow by 25.6% on the hot side and 16.6% on the cold side.

Powder-coated for heat resistance, 3-Piece tube set for perfect fitment and maximum flow, These Hot -Side Tubes direct heated air from the turbos to the intercooler with less restriction.
2.5" Mandrel-Bent Powder-Coated Stainless Steel, for improved flow to intercooler.
this tube upgrade combo outflowed the stock tube by 18 percent and resulted in a maximum gain of 9 horsepower and 11 lbs. X ft. of torque as verified by in-house Dyno.
These intercooler tubes works with aFe or OE Intercooler, High quality clamps and silicone couplings Included for a perfect fit and strength.
All necessary hardware included for a hassle-free installation, This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
This item is not for sale in California/Non CARB compliant.

Large Ice Making Capacity : Keep the water tank filled and this unit will produce 33 pounds of clear ice cubes in a 24 hour period.
24 Ice Cubes : Makes 24 square shaped clear ice cubes per cycle.
Clear Vs. Cloudy Ice Cubes : Clear ice cubes tend to last longer and keep drinks colder than traditional faster melting cloudy white ice cubes.
Quick Freezing Ice : Makes 9 small or largecube shaped clear ice cubes in as little as 7 minutes.
Control Panel : Simple to understand and illuminated with LED lights, the electronic control panel lets you know when you need to add water, when the ice basket is full and allows you to choose the size of the ice cubes.
Automatic Shutoff: Unit will shutoff automatically after 16 hours of continuous use.
Removable Ice Basket : Ice basket easily removes to transfer ice cubes to glasses or coolers.
Easy View Water Tank: Clear lid and water tank allows for easy viewing of ice cube capacity.
Ice Scoop: Included accessory is great for easily filling glasses or coolers.

This will fit: 2008 2009 2010 2011 2012 2013 Subaru WRX / 2008 -2013 STI (all turbo models) 7 x pieces polish aluminum pipe set up 7 x polyester reinforced High temperature silicone hose 1 x overflow reservoir 1 x reinforcement beam bracket 14 x T-Bolt Clamp 1 x Project intercooler.
INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 400-500+hp core length: 25" core height: 9.5" core thickness: 3.5" inlet / outlet size: 2.5" end to end length: 35".
note: this intercooler fit both wrx and sti, so therefore there will be extra pipe left if you were to use it for the wrx, vice versa. but please keep the extra pipe if you are planning to use it or sell it to sti owners, vice versa. also if using this on sti, customer must us a different bov then stock, such as turbo xs..
note: this intercooler kit will retain the factory fog lights for both sti and wrx..

3/4" (AN 12) hose barb weld in bung adaptor nipple Barbed Weldable for Oil Cooler / Turbo Charger / Braking.
Most commonly used when needing to attach AN lines to areas that don't currently have an AN flare.
A few examples would be: Intercooler piping, Intake manifold, or even a custom overflow tank.
All of our weld on fittings have minimal anodizing to ensure proper and ease of welding.

Universal intercooler provides optimal flow and volume for high horsepower vehicles.
Overall Size: 31” x 12” x 4” / Core Size: 24” x 12” x 4”.
Inlet & Outlet: 3” / Tank Wall Thickness: 5mm / Max PSI: 32.
Robust, one-piece cast aluminum end tanks withstand high boost pressures.

Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
Commonly used in industrial, automotive, marine and aerospace industry.
Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.

The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo....

This will fit: 2002 2003 2004 2005 2006 2007 Subaru WRX / STi (all turbo models).
6 x pieces polish aluminum pipe set up 9 x polyester reinforced High temperature silicone hose 17 x T-Bolt Clamp 1 x coolant overflow tank 1 x intake....
INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 300-550hp core length: 28" core height: 9 1/2" core....
NOTE: You can keep the factory foglights with this kit.