Reviews Intercooler Hose

Rev9 ICK-044 ICK-044 Front Mount Intercooler Conversion Kit, FMIC, compatible with Subaru Impreza WRX/WRX STI

  • This will fit: 2008 2009 2010 2011 2012 2013 Subaru WRX / 2008 -2013 STI (all turbo models) 7 x pieces polish aluminum pipe set up 7 x polyester reinforced High temperature silicone hose 1 x overflow reservoir 1 x reinforcement beam bracket 14 x T-Bolt Clamp 1 x Project intercooler.
  • INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 400-500+hp core length: 25" core height: 9.5" core thickness: 3.5" inlet / outlet size: 2.5" end to end length: 35".
  • note: this intercooler fit both wrx and sti, so therefore there will be extra pipe left if you were to use it for the wrx, vice versa. but please keep the extra pipe if you are planning to use it or sell it to sti owners, vice versa. also if using this on sti, customer must us a different bov then stock, such as turbo xs..
  • note: this intercooler kit will retain the factory fog lights for both sti and wrx..
Check Stock

GM Genuine Parts 42626074 Turbocharger Intercooler Hose, Black

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.C.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Red)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project.
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
  • 4.Made of stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance.
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..
Check Stock

Vibrant Performance 2176 3\ Polished Aluminum 90 Degree Bend

  • Aluminum pipe Length: 600 mm.Thickness: 1.8 mm.Made of high quality T6061 Aluminum.Polished surface..
  • Silicone hose:Made of high quality silicone, 4-ply Nylon reinforcement,with enhanced strength and durability.Silicone hose Thickness: 5mm. Size tolerance:+/-0.5mm.
  • Silicone hose working Temperature:-76 °F (-60 °C ) to +500 °F (+260 °C), working Pressure:0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI)..
  • T bolt clamps: Made of high quality 301 stainless steel material.
  • Universal fitment, depending on the size of your Intercooler.
Check Stock

MooSun 2\ 8-Pcs Universal Intercooler Pipe Piping Turbo Polished Aluminum Kit with Silicone Hoses and Stainless Steel T-Clamps

  • Upgraded replacement - this turbocharger intercooler pipe kit features a metal tube to replace a failed plastic original component.
  • Complete kit - includes pipes and clamps needed for repair.
  • Application specific - made to replace the original intercooler hose on certain Ford Super Duty and Excursion model years.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

28'x7'x2.5' Universal Turbo Intercooler with Front Mount Intercooler + 2.5' 12 Pcs Aluminum Bent Pipes + 8pcs Straight Couplers + 4pcs 90 Degrees Elbow Couplers + 24pcs T-Bolt Clamps

  • Ⓞ Made of High quality T-6061 Lightweight Aluminum Piping.
  • Ⓞ Increase 65% Air Flow comparing with other Standard Piping.
  • Ⓞ Package included: 12-Piece Piping Set Includes: 6 X 90 Degree Long-Pipe.
Check Stock

Universal FMIC Turbocharger 8 Pieces 3" inch DIY Aluminum Intercooler Piping Kit with Silicone Coupler Hose T Bolt Clamp Set Performance Upgrade (Black Piping Red Coupler)

  • 3" inch universal turbo Intercooler piping kit made of high quality T6061 Aluminum Includes 8 Pieces aluminum piping, 8 piece silicone coupler hose and 16 pieces T-bolt clamps.
  • Will increase up to 65% airflow, 10-20HP, Max PSI: 30 up to 400HP.
  • This is a custom DIY Upgrade kit. Additional parts may require depending on your set up. Modifications Required..
  • Universal Fitment: Depending on your desired set up and or size of your intercooler.
  • Installation Instructions not included. Professional installation is highly recommended.
Check Stock

Mishimoto MMINT-F2D-08SL Performance Intercooler Compatible With Ford 6.4 Powerstroke 2008-2010 Silver

  • 63mm/2.5" Turbo Intercooler---- Universal Front Mount Turbo Intercooler with 63mm/2.5in inlet diameter. Model: XH-ZL238-SL. 100% brand new, please confirm whether the product is suitable before purchasing.
  • Cooling of Pressurized Air---- The front mount intercooler can reduce the intake temperature of the engine, improve the air exchange efficiency of the turbocharged engine, reduce engine fuel consumption. Excessively hot air will reduce the power of the engine.
  • High Performance---- This front mount intercooler adopts bar and plate design, reasonable structure, professional manufacturing, more stable and reliable performance. Timely replacement of old or damaged turbo intercooler for better cooling performance.
  • High Quality Aluminium Alloy---- The front mount intercooler is made of high-quality aluminium alloy material, which is wear-resistant and durable, not easy to damage and has long service life. The manufacture of the turbo intercooler meets the strict quality requirements.
  • Easy to Install---- Features mounting points at the top and bottom of the intercooler, easy to install. Ideal and direct replacement for old or damaged front mount turbo intercooler, dependable to use.
Check Stock

ACDelco Professional 26263 Molded Turbocharger Intercooler Hose with Clamps

  • 4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone.
  • Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. Bursting pressure: 2MPA.
  • 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Great for marine and industrial use perfect use with Turbocharger, Supercharger, DIY Intake, radiator cooling system and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
  • Meet and exceed Saej20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications.
  • Inner Diameter: 3.5"-4" (89mm-102mm). Leg Length: 4.5"X4.5". Wall Thickness: 5mm . We Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Check Stock