Reviews Intake Manifold Hoses

Carburetor Intake Manifold Boot,for Yamaha Big Bear 350 Yamaha Warrior YFM 350 YFM350 1987-2004 ATV Carb, by NAKAO

  • ➤[Replace]: Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation Replace Part Number：3HN-13586-02-00, 3HN-13586-01-00..
  • ➤[Fitment]: This Carburetor Intake Manifold Boot Fits for Yamaha warrior 350 YFM350 1987-2004, Yamaha MOTO-4 350 YFM350 1987-1990, Yamaha MOTO-4 350 YFM3501992-1995, Yamaha Big Bear 350 YFM350 4WD 1993-1996,Yamaha Big Bear 350 YFM350 2WD 1996-1998, Yamaha Kodiak 400 YFM400 4WD 1996-1998, Yamaha wolverine 350 YFM35F 1995.
  • ➤[Installation]:This Carburetor Intake Manifold Boot installation is super easy and Direct fitment and perfect replacement,meets or exceeds OEM standards.fit for warrior 350 intake boot, yamaha warrior intake boot, warrior 350 intake, yamaha intake manifold, wolverine intake boot, warrior 350 parts, warrior carb boot, banshee intake boots, banshee carb boots, intake manifold, efi yamaha warrior 350 part, yamaha warrior banshee parts, yamaha warrior carburetor, intake manifold rubber boot.
  • ➤[Package include]: 1x Intake Manifold, 1x Carburetor O-Ring ,2x spring pads , 2x Bolts, 2x Washers, 2x Nuts. please check it befor carefully to make sure it is what you need..
  • ➤Providing high quality and professional parts with great serv....
Check Stock

Golden Selection Engine Filter Air Intake Duct Hose Kit Compatible With Honda Accord 2.3 2.3L L4 1998 1999 2000 98 99 00 17228-PAA-A00 696-034 17228PAAA00 696034

  • Replacement air intake hose compatible with Honda Accord 1998 1999 2000 2.3L. Replacement for the factory air intake hose of your 98 99 00 01 Accord..
  • Air Intake Hose is also an air filter hose, boot, or tube connects to your vehicle’s air to the intake manifold bolted to the engine. To avoid....
  • While this is NOT a genuine OEM part, reliable OE finished air intake hoses are built with high quality rubber for high temperature and dry....
  • Interchange numbers compatible with this air intake hose: 17228-PAA-A00 696-034 17228PAAA00 696034.
  • This air intake hose compatible with Accord comes complete with warranty. If the intake hose cracks, defects, or breaks in anyway, please do not....
Check Stock

Tektall Alloy 1\ Intake Manifold Spacer Replace for Ford GT-40 5.0 Mustang explorer Cobra 1987-1993 Durable

  • 【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications..
  • 【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year..
  • 【Product Dimension】 THICKNESS 1" Made of High quality alloy..
  • 【High Performance】Tektall Intake Manifold Spacer can reduce heat transfer from the engine to the intake manifold. The result is a colder IAT (don’t forget, colder air is more dense, which means more horsepower!). The end result is increased horsepower and allowed to increase time with fewer explosions..
  • 【Package Includes】 1 X Intake Manifold Spacer, 2 X Gaskets, 1 X Mounting Hardware kit. Please confirm the item if it matches your machine before you purchase..
Check Stock

BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400

  • 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
  • COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
  • ADVANTAGE - Basic Operating RPM Range: Idle-5500.
  • FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
  • DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Check Stock

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

E-Tuner 4

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

Fieldpiece Sman Digital Manifold with Micron Gauge Sm380v

  • SMAN Manifold + Micron Gauge (3 Port) with Yellow Jacket 22985 hoses.
  • Package with SM380V and Yellow Jacket 22985 hoses.
Check Stock

A-Premium Air Flow Meter Boot Intake Hose Tube to Throttle Body Replacement for BMW E46 323i 323Ci 325i 325Ci 328i 1999-2006 Z3

  • ...ot only enhance antioxidant and anti-aging, but also fully resist cracking caused by drying and prevent soften from high temperature..
  • 【Importance of Parts】The air intake hose plays an important parts that fixes between air intake box and throttle body on vehicle, which connects the air filter box and the intake manifold. As you checking engine light (CEL), poor fuel economy and hesitation during acceleration maybe caused by your air intake hose develops cracks or small holes, under these circumstances, you need replace it timely..
  • 【Reference Number】(Make sure this part fits your vehicle exactly) OEM Part Number: 696-061, 13541705209, SK696061,ANTK103.
Check Stock

Intake Manifold Runner Control Motor - Compatible with 2015-2018 Hyundai Sonata 2.4L 4-Cylinder

  • Compatible with or fits: 2015 - 2018 Hyundai Sonata 2.4L 4 Cyl.
  • Direct replacement - this replacement intake manifold runner motor matches the fit and function of the original equipment motor on specified vehicle....
  • Directly replaces the original motor ~ Made of quality materials and components for long-lasting, reliable service ~ Original Equipment Quality.
  • Package Contents: 1 Engine Intake Manifold Flap Motor.
Check Stock