Reviews Insulation Strain Clamp

Lisle 32900 Heavy Duty Circuit Tester and Jumper

  • Comes with a strain relief spring on the cord.
  • Heavy-duty circuit tester for checking low voltage up to 12 volts.
  • By depressing the red button the tester becomes a jumper for powering electrical components or a ground.
  • The probe, handle, cord and clamp are reinforced for durability..
  • Comes with a strain relief spring on the cord..
Check Stock

1587KIT/62MAX+ FC 2-in-1 Adv Elec Tr Ins Mult Kit W/62Max+ I400

  • Fluke 1587FC Insulation Multimeter is the single tool that allows users to perform advanced insulation testing for preventive and PdM tasks.
  • Fluke i400 Clamp meter Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.
  • Fluke 62 MAX+ Infrared Thermometer -30°C to 650°C (-22°F to 1202°F).
Check Stock

Valterra RF850 1/4\ MPT x 3/8\ Barb Adapter

  • Right Angle Nylon Cable Glands NPT Thread - These Right Angle Cable Glands are corrosion resistant..
  • Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
  • Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation.
  • Threads into your panel for clearance, locknut included.
Check Stock

LMAVAG Motorcycle Cup Holder Handbar Bike Cup Holder,Universal Bike Water Bottle Holder Clamp on ATV Cup Holder Kayak Drink Holder for Scooter,Automotive,Boat,Golf Cart,Scooter,Lawn Mower,Tractor

  • Wide Application: The Handbar Cup Holder comes with extra self reinforced straps(in two side) to fix the handhar when necessary which is wide to use for Bike,Motorcyle,ATV/UTV,Kayak,Golf Cart,Scooter, Wheelr Chair, Walker, Boat,Lawn Mower,Beach Chair, Tractor,Shopping Cart ect..
  • Durable Adjustable Clamp: The bike cup holder with bionic alligator clamp,which is durable to bite the round handbar,the clamp with little steel plat to keep firm,and could adjust the clamp in 360 degree to fit the bar..
  • Thermal Insulation to keep: The inner of Bar cup holder is thermal insulation layer to keep your bottle warm or cold..
  • Anti-Scratch Handbar & Bottle:The Inner of the cupholder with protective strap to keep the bottle well,will not get the bottle scratched, and the clamp come with a foam adhesive to protect the handlebar get scratched..
  • Extra Features: The inner diamter of the cupholder is 3.26in(8.3cm), the high of holder is 5.3inch. Ether features.
  • 1. With adjustble drawstring to hold the bottle firmly.
  • 2. With two little mesh pocket to hold some little thing,like keys,cars,tools ect.
  • 4. Waterproof fabric to keep the bottle well..
Check Stock

4Pack Adjustable Bed Risers with Screw Clamp, Couch Risers Fit for Furniture Thickness 0-1.5 In, Elevation in Heights 4 In Heavy Duty Risers for Sofa Desk Chair Cabinet Supports 20000 Pounds(Brown)

  • ...ial Felt Pad】 Adjustable bed risers made of strong hard plastic material, the furniture riser is super durable, and the four risers can support high duty of 20,000lbs. The bottom special felt pad helps protect wood, carpet and all kinds of floors without scratching. and at the same time they plays a role in sound insulation, Insulation, heat insulation effect..
  • 【Protect Furniture Legs, Great for Robot Vacuums】 Furniture risers with screw clamp fit for sofa risers, bed risers, table, mattresses, closets, office chairs risers and nightstands. Protect the legs of high quality furniture for decades. The riser with a total height of 134mm/5.3 inches can actually increase the height of the furniture by 102mm/4inch. It is convenient for the robot vacuums to work ..
  • 【Wide Applicability Only Not Apply to Recliner Legs】Cabinet chair risers suitable for round and square legs will work, just fix with screw clamps. BUT do not compatible with any furniture with slanted legs..
  • 【100% Satisfaction Guarantee】 Each bed furniture risers has been tested under heavy pressure, high temperature resistance and anti-cracking. We use ha....
Check Stock

Gator Lift Plywood and Sheetrock Panel Carrier 0 to 1 1/8 Grip Range 2 Pack

  • HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC. - Gator Lift presents one of the most innovative tools for lifting and carrying all kinds of....
  • GRIP HANDLE FOR ONE-HAND CARRYING - This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person....
  • SOLID METAL CONSTRUCTION - This tool is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from....
  • EASY ON YOUR BACK - Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and....
  • SELF-ADJUSTING GRIPPER CLAMP - This piece of equipment by Gator Lift has a versatile, yet simple design that allows the clamp to grip onto a variety....
Check Stock

Apollo Stainless Steel Crimp Clamp Tool - 1 Each

  • ICP-PC01 Pinch Clamp Removal Tool is specifically designed to remove Stainless Steel Pinch Clamps (not included) in the event of a mistake or need for a modification..
  • Compatible with any brand of stainless steel pinch clamps designed for use with PEX. Also ideal for removal ear clamps with Max. ear width 13mm..
  • Compound action cutting tool: maximum mechanical advantage for easier and safer use. High mechanical advantage makes clamp removal easier and reduces the risk of strain injury..
  • Designed to deliver many cutting cycles without loss of performance, using the lowest practical cutting force. Constructed of solid metal for long tool life, with textured grips for a more secure hold. Cinch clamp removal tool to be used in conjunction with the cinch rings to remove PEX cinch clamp rings. The tool provides a fast and quiet solution to removing PEX fittings and can be used in both home and commercial settings. Safely cuts PEX stainless steel clamps for quick fitting salvage..
  • A fitting that has been removed and is in good shape can be used in another system saving money. Avoid clamping on the insert ribs or barbed area, which will damage the fitting making it unusable. Ideal for stainless steel and steel clamps from Apollo, Oetiker, Watts, etc..
Check Stock

CARTLIFE Plywood and Drywall Panel Carrier Tool,Sheetrock Gripper,Heavy Duty Metal Gripper for Clamp Wood Board or Drywall Lifter with Single Hand (No Back Pain)

  • ...o grip a variety of different kinds of panels and sheet goods. When you start lifting, the clamp automatically adjusts the width depend on the thickness of the panel or sheet..
  • ✅【Easy on your back】 Traditionally carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and allows you to carry heavy materials with a single hand. Rather than bending over to lift materials from the bottom, simply place the clamp over the top edge of the material, then lift. The self-adjusting clamp holds materials tight as you lift..
  • ✅【Only one-hand carrying】Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift..
  • ✅【Heavy Duty Holder】Carrying all kinds of plywood, panels, sheets, and slabs, carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper 0-1”.
  • ✅【Innovative Tool Design】Heavy-duty solid metal construction. The clamp and the handle arm are made in aluminum. The handle is made of impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use..
Check Stock

NICOR Lighting 4 inch Universal Housing for New Construction Applications (19000A)

  • Designed for new construction applications.
  • Airtight housing provides increased energy efficiency through room insulation.
  • Integrated thermal protector guards against improper lamping and misuse of insulation materials.
  • The 5.5-inch height allows use in 2 x 6-inch joist construction.
  • Supplied with three IDEAL Push-In wire connectors.
  • Suitable for new construction in residential and commercial applications.
  • Integral thermal protector guards against improper lamping and misuse of insulation materials.
  • Listed for through branch circuit wiring and includes several 3/4 inch knockouts.
  • Four pry-outs with integral strain relief simplify Romex installation.
  • Heavy-gauge NICOR captive hanger bars provide greater stability.
Check Stock

QISF 6 Pcs Magnetic Welding Head, Welding Ground Clamp, Magnetic Welding Support,Strong Magnetism Large Suction,Copper Tail Welding Stability Clamps(2 Sets)

  • 【Feature】-- This magnetic clamp is easy to attach to any smooth metal surface, flat or curved.Strong magnetic grip which can make you welding Work more easy and simple..
  • 【Convenient work】-- Undamage the surface or car's paint,this magnetic clip is very convenient..
  • 【Wide Fits】-- The clamp can also be attached to metal poles, struts, railings or the welding table..
  • 【Material】-- Copper / Insulation Board.
  • 【Package】-- 1Pcs Single Head Magnetic Welding Ground Clamp.
  • 1Pcs Double Head Magnetic Welding Ground Clamp.
  • 2Pcs Copper Tail Welding Stability Clamps.
Check Stock