Reviews Insulated Cord End Terminals

400Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connector Crimp Terminal Block Assortment Kit Golden with Insulating Sleeve for Electrical Wiring Car Audio Speaker N-002

  • Three types of gold flat terminal set (2.8mm, 4.8mm, 6.3mm male and female) total are used in toggle switch, speaker, horn, etc. This terminal set contains 480 products, 240 terminal insulated sleeves, 120 female insulated sleeve, and 480 total products. It is a fastel terminal that is always used for car, motorcycle, home center, wiring work, repair..
  • It is made of high quality brass, and it has good electrical conductivity and durability. This connection terminal set has a large number of male Messiah terminals and insulated male / female sleeve, so please use it in a safe manner..
  • The safety cover is attached to each of the male and female terminals. It is the terminal terminal set suitable for insulation such as electric wire, horn, general relay, etc. A flat terminal terminal is used for connecting horn, speaker, and general relay..
  • First, the insulated sleeve is connected to the wire, and then the female and the male terminal of the male are connected to the end of the cable. Please note: connect the wiring cord using a dedicated electrician pouch..
  • This terminal set (110, 50, 187, 40, 250, 30) comes with a plastic storage case, easy to carry and take out. It is widely applied to automobiles, motorcycles, transportation, machinery, distribution, el....
Check Stock

Cable Matters 3 Prong Dryer Cord, 30 Amp Appliance Cord (NEMA 10-30P to 3-Wire) - 10 Feet

  • DRYER POWER CORD 3 prong fits a standard 30A 3 wire dryer cord outlet.
  • 3-prong 30A 10-30R outlets are commonly found in an older building or homes built before 1996.
  • Purchase a longer replacement 3 prong cord to move your dryer to a nearby location.
  • 3 WIRE DRYER CORD with a 30A NEMA 10-30 plug fits older and most newer dryer models.
  • Purchase new 3 wire dryer cords for dryers that are often sold without the power cord.
  • HEAVY DUTY 10 GAUGE 240V dryer cord 3 prong with 10 3 wire copper conductors is compatible with a 30 amp 240V clothes dryer outlet.
  • SDRT cable jacket on the electric dryer cord incorporates insulated thermoplastic construction.
  • Supports up to 300V and 140F to prevent overheating.
  • RUGGED & SAFE with a right-angle dryer plug 3 prong that connects securely into the outlet.
  • 30A 10-30 plug has side grips to assist in unplugging when necessary.
  • Ring terminals provide an easy installation and a secure connection.
  • Strain relief brackets support the weight of the cord at the dryer end.
  • ELECTRIC DRYER POWER CORD is compatible with older model dryers and many new models that accept a 3 wire cord.
  • A lifetime warranty and product support provides peace of mind when purchasing this 3 prong power cord.
Check Stock

Cable Matters 3 Prong Dryer Cord 6 ft, 30 Amp Appliance Cord (NEMA 10-30P to 3-Wire)

  • Dryer power cord 3 prong fits a standard 30A 3 wire dryer cord outlet.
  • 3-prong 30A 10-30R outlets are commonly found in an older building or homes built before 1996.
  • Purchase a longer replacement 3 prong cord to move your dryer to a nearby location.
  • 3 wire dryer cord with a 30A NEMA 10-30 plug fits older and most newer dryer models.
  • Purchase new 3 wire dryer cords for dryers that are often sold without the power cord.
  • UL listed Heavy duty plug with 10 gauge 240V dryer cord 3 prong with 10 3 wire copper conductors is compatible with a 30 amp 240V clothes dryer outlet.
  • SDRT cable jacket on the electric dryer cord incorporates insulated thermoplastic construction.
  • Supports up to 300V and 140F to prevent overheating.
  • Rugged & safe with a right-angle dryer plug 3 prong that connects securely into the outlet.
  • 30A 10-30 plug has side grips to assist in unplugging when necessary.
  • Ring terminals provide an easy installation and a secure connection.
  • Strain relief brackets support the weight of the cord at the dryer end.
  • Electric dryer power cord is compatible with older model dryers and many new models that accept a 3 wire cord.
  • A lifetime warranty and product support provides peace of mind when purchasing this 3 prong power cord.
Check Stock

Cable Matters 4 Prong to 4 Wire Range Cord 4 ft, Heavy Duty 6/8 AWG 50 Amp Cord (NEMA 14-50P to 4-Wire)

  • UL listed electric range cord 4 prong fits a standard 4 wire oven stove cord outlet.
  • 4-prong 50A outlets are commonly found in a newer building or homes.
  • 4 wire oven range power cord with a 50A NEMA 14-50 plug fits most newer range models.
  • Purchase new 4 wire range cords for electric ranges that are often sold without the power cord.
  • Heave duty 6 + 8 AWG range cord is compatible with a 30/40/50 Amp electric stove oven outlet.
  • SDRT cable jacket on the electric oven cord incorporates insulated thermoplastic construction.
  • Supports up to 300V and 140F to prevent overheating.
  • Rugged & safe with a right-angle 4-prong range connector that connects securely into the outlet.
  • Ring terminals provide an easy installation and a secure connection.
  • Strain relief brackets support the weight of the cord at the range end.
  • Compatible with range model from popular brands such as GE, Whirlpool, Kitchenaid Samsung, Frigidaire, and Kenmore.
  • A lifetime warranty and product support provides peace of mind when purchasing.
Check Stock

Cable Matters 4 Prong Dryer Cord (30 AMP Appliance Power Cord with Dryer Plug/Dryer Power Cord) - 10 Feet (NEMA 14-30P to 4-Wire)

  • 4 PRONG DRYER CORD for a 30A 4-wire dryer connection.
  • 4-prong 30A 14-30R outlets are commonly found in homes built after 2000 for a dryer power cord 4 prong compatible.
  • 4 WIRE DRYER CORD with a NEMA 14-30 plug fits most newer dryer models.
  • Purchase an appliance power cord for a new dryer that is often sold with out the power cord.
  • HEAVY DUTY 10 GAUGE dryer cord 4 prong is rated to support up to 250V / 7500 watts.
  • A SDRT cable jacket on the electric dryer cord with insulated thermoplastic construction is rated to support up to 300V to prevent overheating.
  • RUGGED & SAFE with a right-angle dryer plug that connects securely into the outlet.
  • 30A 14-30 plug has side grips to assist in unplugging when necessary.
  • Color-coded cords are designed with molded ring terminals for easy installation.
  • Strain relief bracket supports the weight of the cord at the dryer end.
  • ELECTRIC DRYER POWER CORD replacement is compatible with newer model top loader, front loader and steam dryers from Whirlpool, Kenmore, Sears, LG and more.
  • A lifetime warranty and product support provides peace of mind when purchasing this dryer appliance cord.
Check Stock

Cable Matters 4 Prong Dryer Cord (30 AMP Appliance Power Cord with Dryer Plug/Dryer Power Cord) - 6 Feet (NEMA 14-30P to 4-Wire)

  • 4 PRONG DRYER CORD for a 30A 4-wire dryer connection.
  • 4-prong 30A 14-30R outlets are commonly found in homes built after 2000 for a dryer power cord 4 prong compatible.
  • 4 WIRE DRYER CORD with a NEMA 14-30 plug fits most newer dryer models.
  • Purchase an appliance power cord for a new dryer that is often sold with out the power cord.
  • HEAVY DUTY 10 GAUGE dryer cord 4 prong is rated to support up to 250V / 7500 watts.
  • A SDRT cable jacket on the electric dryer cord with insulated thermoplastic construction is rated to support up to 300V to prevent overheating.
  • RUGGED & SAFE with a right-angle dryer plug that connects securely into the outlet.
  • 30A 14-30 plug has side grips to assist in unplugging when necessary.
  • Color-coded cords are designed with molded ring terminals for easy installation.
  • Strain relief bracket supports the weight of the cord at the dryer end.
  • ELECTRIC DRYER POWER CORD replacement is compatible with newer model top loader, front loader and steam dryers from Whirlpool, Kenmore, Sears, LG and more.
  • A lifetime warranty and product support provides peace of mind when purchasing this dryer appliance cord.
Check Stock

The Hillman Group 50020 1/4-Inch Flag Wire Terminal, 15-Pack

  • Fully insulated design female flag connector terminals.
  • Totally 60 pieces, practical and economical.
  • Flag terminals are great for those hard to REACH right angles when running wires..
  • One end is crimped to the wire and the other end is a standard female quick disconnect that connects to a male quick Disconnect..
  • Made of premium nylon and tin plating brass, high quality, safe.
Check Stock

Powerwerx TRIDIES Interchangeable accessory die sets for the TRIcrimp Powerpole crimping tool

  • Expand the functionality of your TRIcrimp tool with these additional die sets.
  • Easily crimp OEM-T, HF/VHF connectors, SB50/PP75 contacts, hex crimp for various coaxial cable connectors, non-insulated terminals, insulated terminals, end sleeves and more.
  • This 6 die set package contains 6 Interchangeable accessory die sets for the TRIcrimp tool listed blelow.
  • TRIcrimp die sets will not fit or work with any other brand of tool.
Check Stock

Ferrule Crimping Tool VLIKE Wire Crimper Pliers with 1200 Terminal Ferrules Connector Sleeves for Stripper Wiring Projects

  • Complete Crimp Tool Kit – Every order comes with a crimping tool and 1200 insulated wiring terminals to support small DIY projects and large....
  • Ergonomic Handle Design – The handle with nylon material, non-slip, and using the leverage theorem, the operation more effort..
  • Square Crimping Pliers – For insulated and uninsulated sleeve terminals, wire ferrule & end sleeves 0.25-10mm², ferrule crimper AWG23-7 HSC8 6-4..
  • Professional Craftmanship – This crimping tool makes short work of terminals and connectors for electricians, contractors and builders..
  • Self adjustable Crimper Plier Tool – According to the requirements of the terminal, it automatically adjusts itself to the appropriate diameter for....
Check Stock

uxcell 10 x Wire Crimp Connector Terminals Insulated Ferrule Blue E25-16 4AWG

  • ✅[No more stranded wires]no problem with frayed wires on the end inserting into speaker terminals or circuit boards..
  • ✅[GOOD CONDUCTIVITY] Insulated Ferrule Made of high quality copper material with tinned surface for oxidation resistance, corrosion resistance and high conductivity to maximize current. Insulated flare makes the wire easy to insert, eliminates loose wires and prevents wire ends from fraying or breaking. Safe to use and reliable connection..
  • ✅[Widely used]Perfect for car amplifiers, battery terminals, various home appliances and DIY audio. Works great in clearing engine compartment and amplifier connections. Perfectly matched with amplifiers that use direct wired inputs..
  • ✅[Flame-retardant material] The end protection connector-sleeve connector kit is designed as an insulated flare made of PVC material. It is not only flame retardant, but also prevents wire ends from fraying or breaking, thus reducing the risk of safety hazards..
  • ✅[100% Money Back Guarantee]:If you encounter any problems during the installation process, please contact us and we will try our best to help you solve the problem. If you are not satisfied with our products, we offer a 360-day money back guarantee..
Check Stock