Reviews Inspired Start Pack 1s

D1S - OSRAM XENARC OEM 4300K HID/XENON Headlight bulb 66140 35W DOT by ALI - Made in Germany Pack of 1

  • D1S - OSRAM 4300K OEM HID Xenon Light 66144 35W DOT Made in Germany w/ 11-digit Security Label (Not 7-digit TRUST code) | Pack of 1 (Authenticity of....
  • 66144 Model comes w/ 11-digit serial# sticker ONLY | If you need 7-digit TRUST code, view our 66140 Model at Higher Price | PLEASE NOTE: ONLY Upgrade....
  • D1S (As long as your vehicle has D1S type bulb, this is compatible | OEM 4300K, 3200LM, 85V 35W Direct Factory Replacement | 4300K is ‘Standard....
  • Extremely Long Life with precise light distribution & consistent performance | DOT approved, 100% legal for On/Off road use | Replace in pairs for....
  • Check compatibility before ordering. This is NOT ‘D3S’ Type. D1S bulb cannot be used for D3S Application. | This is NOT Halogen light. HID bulb....
Check Stock

Car Remote Start PKE Passive Keyless Entry One Key Engine Start for Car Remote Key or Phone Control

  • Difference:【Key with PKE Function 】 the key has PKE Passive Keyless Entry function. 【 Key without PKE Function】the key don't have PKE Passive....
  • 【Remote Engine Start/ Pre-warm or Pre-cool your car】Keep the air conditioner on after getting out of the car, use App or remote key to start....
  • 【One Key Start / Build-in Lock】 Step on foot brake and press button for 1S to start up the car directly. When start the car and step on the foot....
  • 【PKE Passive Keyless Entry Especially For Upgrading Old Models】PKE sensing distance is 2-5m, door will unlock when the key or phone approch the....
  • 【Important】Without this step, you can't use remote start function【Auto Car】 When the car in start-up state, put the car gear in”P” or....
Check Stock

Tenergy TB6-B Balance Charger and 5-in-1 Battery Meter for 1S-6S Digital Battery Packs, Charger for NiMH/NiCD/Li-PO/Li-Fe Packs

  • One charger for many battery packs - The Tenergy TB6-B balance charger/discharger and 5-in-1 battery meter bundle offers detailed charging and discharging features for all LiPo/LiFePO4/Li-ion battery packs. Get full detailed battery pack health information with the meter, and full charging/discharging capabilities with the TB6-B balance charger..
  • Multiple connector harness - Tenergy's AC balance charger can recharge battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added..
  • Wide voltage compatibility - The smart charger is compatible with NiMH/NiCd 1.2V-18V (1S-15S), 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), and 9.6V, 12.8V, 16V. SLA 2V-20V..
  • Multi-purpose battery meter - Tenergy's 5-in-1 cell meter is a great addition to any habby charging arsenal, the meter estimates voltages for LiPo/LiFePO4/Li-ion (2-7 cells) packs and NiCd / NiMH batteries for TX and RX (4-7 cells). The battery capacity checker requires no additional accessories and is powered by the testing battery pack to quickly evaluate the pack's capacity.
  • use the battery checker to evaluate the health of your battery pack and decide when to discard or re....
Check Stock

Venom Pro 2 LiPo Charger | AC DC NiMH and Lithium Battery Charger Discharger | with XT60, HXT, to EC3, JST, Deans Connector, Alligator Clips, Tamiya Charger for Your RC Battery Charger Needs

  • ...o 2 NiMH Pb LiPo battery charger discharger's compact design is ultra-portable, making it easy to bring to you all of your RC activities, indoors or outdoors..
  • Comes with Complete Accessories | This balance charger comes with seven of the most popular charging leads compatible with XT60, Deans, EC3, Tamiya, Receiver Pack, JST, EC5, Glow Plug, and Alligator clips for trouble-free connections. Use it for your 1S, 2S, 3S, 4S, 5S, 6 LiPo batteries, as a charger, drone charger, airsoft battery charger, 9.6-volt rechargeable battery charger, and your other RC battery charger needs..
Check Stock

DNA MOTORING HL-3D-HID-AFS-E92-BK LED U-Halo DRL Turn Signal AFS Function Projector HID Headlights Compatible with 07-10 328i 335i / E92 E93,Black

  • ... FITMENT - Compatible with BMW 328i 07-10 / 328xi 07-08 / 328i xDrive 09-10 / 335i 07-10 / 335xi 08 / 335i xDrive 09-10 / M3 08-13, Fits Coupe / Convertible Models Only (E92/E93).
  • FEATURES - White LED U-Halo Running Lights with 3-Stage Start Up Sequence Design.
  • Amber LED Side Marker & Sequential Turn Signal.
  • Use 6500K D1S HID Bulbs with Motorized Actuator on Low Beam to Switch to High Beam Function.
  • QUALITY CONSTRUCTION - Made of High-Quality ABS Plastic Housing and Polycarbonate Lens for Exceptional Impact Resistance and Long-Lasting Durability.
  • Waterproof Tested to Make Sure the Lens is Fully Sealed.
  • Direct Replacement for the Stock Unit to Bring a Brand New and Stylish Appearance to Your Vehicle.
  • *Note: Requires reuse of Factory AFS Module (63117182396, 63117295702, 63117189311) / Headlight Weather Strip.
Check Stock

Tenergy LiPO Bag for Charging and Storage and 1S-6S Digital Battery Pack Charger for Li-Fe/Li-PO/NiCd/NiMH Packs Balance Charger Discharger w/Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

  • Bundle which includes Tenergy's TB6 balance charger with a large lipo bag and small lipo bag..
  • Tenergy balance charger/discharger recharges power for all of multiple battery pack types. Use with NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs..
  • TB6 digital battery pack charger is compatible with NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA 2V-20V..
  • The included Tenergy fire resistance lipo battery bag is made with triple-layered flame retardant protection material capable of withstanding up to 2000°F and meets the rigorous international standards for flammability set by UL 94.
  • Tenergy TB6 balance charger discharger includes 12-month warranty..
Check Stock

Lightbiz LED Closet Light, 24-LED Dimmer Motion Sensor Under Cabinet Light (1 Pack )

  • 【SUPER BRIGHT】-- 1 Pack of 24 pure white ( 150LM ) & energy saving LEDs, brightness and comfortable to illuminate dark spaces..
  • 【EASY TO INSTALL】-- Built in strong magnetic, this light can be adsorbed directly on any iron product, OR installed by magnetic strip ( included ), no hard wiring. It’s very easy to install and remove..
  • 【4 CYCLE MODES】-- MODE 1: Night Mode ( Blue indicator light flash 1s), MODE 2: Day Mode ( RED indicator light flash 1s), MODE 3: Always On Mode ( Red & Blue indicator light will flash 1s ), MODE 4: OFF.
  • 【MOTION & NIGHT SENSOR】-- With 2 Sensor Modes, it can detect the motion of human in the dark or daytime. Auto-on within 10ft (3m), auto-off after about 20 seconds of no motion detected. Super saving energy!.
  • 【APPLICATION & WARRANTY】-- Ideal for the bedroom, closet, cabinet, workshop, garage, stairwell, hallway, storage room etc. We provide you 100% satisfaction warranty with 30 days money back guarantee and 1-Year Warranty. Please feel free to contact us with any issue, we will give you a satisfied reply within 24 hrs..
Check Stock

CNHL 450mAh 1S lipo Battery HV 3.8V 70C Lipo Battery with PH 2.0 Plug for 1S Racing Drone Quadcopter EMAX TinyHawk HAPPYMODEL Snapper7(4 Packs)

  • 【CNHL 3.7V 450mAh Lipo Specification】- Material: Lithium polymer.
  • Plug: PH2.0.dimension is 7.3*18.1*59.3mm/0.28*0.71*2.33inch.
  • 【High Performance】- CNHL 1S lipo battery with 70C discharge rate hardcase.self-products Grade-A cells push the limits of batteries by utilizing new high power cell technology, CNHL batteries are compact and lightweight, maximizing your power to weight ratio..
  • 【Application】 – CNHL 1s 450mah Lipo battery specially designed for FPV racing drone brushless quadcopter TinyHawk Inductrix FPV Plus Kingkong Tiny 7 Beta75S etc..
  • 【Voltage Note】- Please check whether the battery surface is alright when you get it and whether the voltage is between 3 3.8~4.35V before using..
  • 【What you get】- 4Pack of CNHL 3.7v 70C 450mAh 1S Lipo Battery with PH 2.0，After-sales Service: Every CNHL Product has 30 Days Money Back Guarantee & 12 Months Warranty. Please contact us immediately if you have any problems with our product( enter into “Your Orders” for help or send email to our after-sales mailbox), we will reply you within 24 hours..
Check Stock

Jconly J1S Machine Pro Wireless Rotary Pen Machine with Red Battery Kit

  • ...oise. Japan Coreless Motor Maximum working power supply 12V, speed: 10500 rpm. The needle springs back, the stroke can reach 3.5.Product warranty is 1 year, if you have any questions, you can contact us..
  • Pro Tattoo Power Supply - Tattoo Power Supply made of aluminium alloy frame, the size is small, light weight.The pack capacity is 1200mAh, 3.5 hours to be full charged at above 1A charger, about 8 hours working at 8V.Battery capacity: 1200mAh,Size：27.5*62.8mm,Net Weight: 57g.
  • Upgraded Version Cartridge Needles - 100% EO gas sterilized and individually packaged.The frame is made of medical grade PC polycarbonate，colorless, transparent, heat resistant, impact resistant, flame retardant, BI grade.There is four special elastics hold on rebound that lighten the pressure of the needle bar, The Tattoo Cartridge Needles are made of precise mold，working silence.The low profile size makes the ink flow better. It works with almost all kinds of tattoo machines..
  • Value Package - The package contains 1 J1S rotary tattoo pen machine and rca cord,1 Tattoo battery and USB cable,40pcs Top tattoo cartridges needles,2 grip tape and Box.
Check Stock

Tenergy LiPO Bag for Charging and Storage and 1S-6S Digital Battery Pack Charger for Li-Fe/Li-PO/NiCd/NiMH Packs Balance Charger Discharger w/Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

  • Bundle which includes Tenergy's TB6 balance charger with liPO bag. Spend more time enjoying your hobbies with a safer charging and storage bag..
  • Tenergy balance charger/discharger recharges power for all of multiple battery pack types. Use with NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs..
  • TB6 digital battery pack charger is compatible with NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA 2V-20V..
  • The included Tenergy fire resistance lipo battery bag is made with triple-layered flame retardant protection material capable of withstanding up to 2000°F and meets the rigorous international safety standards for flammability set by UL 94.
  • Tenergy TB6 balance charger discharger includes Tenergy's 12-month warranty..
Check Stock