Reviews Insertion Ultrasonic Flow Meter

5 Loop Radiant Heat Manifold, 5-zone PEX Tubing Manifolds with Compatible Outlets, for Hydronic Radiant Floor Heating (1/2" 3/4" PEX adapters sold separately)

  • Its nickeled brass material are higher thermal conductivity, faster heating and insertion into plastic pipes than stainless steel ones..
  • 5 loops with 1 extra drain and cap, 1” FPT supply and return, up to 1.6 GPM high flow meter..
  • Compatible to both 1/2″ and 3/4″ pipes outlets. Adapters not included please search AB manifold adapters 1/2 and 3/4..
  • Heavy duty stainless steel mounting bracket.
  • It includes automatic air vent, shut-off valve, drain valves with outlet caps, temperature gauge, flow valve, balancing valve/manual wheel for supply and return trunks..
Check Stock

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

Xinwoer LED Fixed Wireless Terminal Quad-Band GSM 850/900/1800/1900MHz Alarm, for Telephone Landlines, Alarms, Recording Boxes(US)

  • ...can access the meter or use the computer meter. LED lights display information such as signal, standby status, working status, etc..
  • STANDARD COMMUNICATION VOLTAGE: Standard communication voltage, can be connected with the user switch (PABX). Automatic IP function, multiple IP settings. Fixed long-distance automatic insertion of the calling IP prefix, such as 17951,17911,193 and so on..
  • FIXED LONG-DISTANCE AUTOMATIC INSERTION: Fixed long-distance automatic insertion of the calling IP prefix, such as 17951,17911,193 and so on..
Check Stock

Vividia D3160 USB Digital 180 Degree One-Way Articulating Borescope with 5.9mm Diameter 1 Meter Long Camera Probe

  • Vividia D3160 USB Digital One-Way Articulating Borescope has 5.9mm diameter camera probe and 1 meter long insertion tube (one-way articulation, 5.9mm diameter and 1 meter long, USB borescopes endoscope)..
  • D3160 can only be bent in one direction, and the maximum bending angle is 180 degree..
  • The insertion tube has metal braided outside layers and the bending part is also made with stainless steel, which offers good abrasion resistance..
  • With USB connection, one can connect Vividia D3160 Digital Borescope to a Windows PC (WIndows XP, 7, 8 and 10), MacBook, some android devices (phone or tablet) directly..
  • End users can easily take pictures and videos with free software or app. The LED brightness can be adjusted..
Check Stock

VEVOR Ultrasonic Cleaner 58L-130L Lab Industrial Ultrasonic Cleaners Ultrasonic Parts Cleaner with Heater Timer Professional Cleaning Machine for Industrial Business Using (27 L)

  • Premium Quality: Large ultrasonic cleaner, water tank capacity: 77L.
  • Frequency: 40KHz. The cleaning tank is made of industrial-grade stainless steel..
  • Cleaning Ability: The ultrasonic vibration processing method is used. The built-in powerful transducer can enhance Ultrasonic power. The cleaning frequency of 40KHz can remove the stains on the items in a few seconds, improve the cleaning efficiency, and do not damage the items..
  • Heating Function: The heating temperature of this digital ultrasonic cleaner: 0-80 ℃(adjustable). Heating can reduce the adhesion strength of oil and wax to specific materials to be cleaned, thereby improving the cleaning effect..
  • Digital Control Panel: Digital timer and temperature display for precise washing time and temperature control. The knob power can be adjusted. The Ultrasonic Power is adjusted for correct cleaning to prevent excessive force from damaging the surface of precision parts..
  • User-Friendly Design: This professional ultrasonic cleaner is designed for better use: with a valve and 1-meter long pipe for water discharge. There are also stainless steel cleaning baskets, heat dissipation design, mobile casters, and stainless steel lids..
Check Stock

Flow Meter,Aluminum Alloy 1/2 inch Digital LCD Display High Accuracy Fuel Diesel Flowmeter Water Flow Rate Sensor,Control and Measure Low Flow for Gasoline,Kerosene,Engine Oil Blue

  • ✔【DIGITAL LCD DISPLAY】The aluminum alloy flow meter has LCD screen display, which can provide clear reading. Meanwhile, the LCD display flow....
  • ✔【READING AND ACCURACY】There aluminum alloy fuel diesel flow meter has intuitive clear reading and high reliability on digital stainless steel....
  • ✔【WIDE COMPATIBILITY】The high accuracy fuel flow meter is suitable for high viscosity liquid media such as diesel, gasoline, kerosene, engine....
  • ✔【RELIABLE QUALITY】The blue LCD display high accuracy aluminum alloy fuel diesel flow meter is 100% brand new and high quality. Meanwhile, it is....
  • ✔【100% WARRANTY】We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We....
Check Stock

Forney 85364 MIG Gas Flow Meter and Regulator, MIG/TIG Welders

  • Combination of regulator and flow meter as one single stage piston design unit.
  • Provides accurate regulation of gas flow.
  • Impact resistant machined brass body, polycarbonate flow tube and outer cover.
  • Features regulator and flow meter in one unit.
  • Provides accurate regulation of gas flow designed for MIG and TIG applications.
Check Stock

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

  • Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
  • Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
  • Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
  • Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
  • Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.
Check Stock