Reviews Insert Nylock Nut - BestBuyersPro.com

Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome

Parts Included: (1) Shift Assembly, Standard Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.

Tire Outer Diameter: 62mm(2.44 inch), Tire Width: 26mm(1.02 inch), Drive Hex: 12mm, Axle Hole: 4mm, Depth to the Hex Mount: 8mm.
Check The Size Before Buying. Compatible for 1/10 ON-ROAD Drift Car, Like HSP Redcat HPI Tamiya 3RACING Kyosho Traxxas Wltoys MST ExceedRC, etc..
Material: Tire-Hard Plastic, Wheel Rim-Quality Plastic, 10 Spokes.
Accessories: 4pcs M4 Nickel Plated Flange Serrated Nylock Nuts (Silver).
4pcs M4 Zinc Plated Carbon Steel Flange Nylock Nuts (Black), Flange Can Help....
1 Piece 4-way Socket Spanner Tool, Fits for Wrenching Hex 4mm, 5mm, 5. 5mm, 7mm Glow Plugs, Wheel Nuts and Bolts.

Parts Included: (1) Shift Assembly, Extended Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.

Nut Type: Hex Locknut with Blue Nylon Insert.
Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
Made of 304 stainless steel (no coating outside), provides good strength and corrosion resistance in bad environments..

Fitment: For Most Harley Touring/Softail/Dyna/Sportster Models..
Material: made of Zine-alloy,rust-resisting,a sleek look waterproof and long service life..
Note:If fender has a plastic plug not a nut insert, Please remove plug and use nut kit to mount..
Easy Install:Replace your rear seat/Solo Rack bolt nut Base.Perfect replacement for nut..
Package Include:1* seat bolt and 1* nut kit..

➨ Pack of 20 (Twenty) threaded inserts - great for restocking one of our insert assortments..
➨ These create much more convenient and professional parts than using "captive nuts" (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work..
➨ These are inserted into a hole in the print that is slightly smaller than the insert, and set in place using a soldering iron to melt the plastic around the insert. The inserts have a slight taper and small fins that the plastic flows around, resulting in an extremely strong bond..
➨Rather than adjust designs around the limitations of 3D printing (supports, print bed size, etc), divide your parts into separate components that fasten using these inserts and machine screws. Not only does this give you greater flexibility when designing a part, but also allows you to re-print only failed components rather than full assemblies - saving time and money..
➨ These are threaded M3-0.5 with an overall length (OAL) 3.85mm Outer diameter at the top (wider end) is 5.6mm, bottom is 5.12mm Hole size in your product should be slightly smaller than the insert, to allow plastic ....

Accepts Standard Bits: Magnetized bit holder is compatible with insert bits and power bits for convenient replacement..
Ratcheting: Allows the user to turn the driver without stopping to adjust wrist position..
Optimized Grip Zones: Heavy texture mid-zone provides maximum torque. Low texture base zones provide speed and precision..
Sizes Included: PH #1, PH #2, T25, SQ #2, SL 8-10, 1/4'' Nut Driver, 3/8'' Nut Driver, 5/16'' Nut Driver.