Reviews Inner Installed Mixing Valve

Cash Acme 3/8 Inch HG145 Thermostatic Mixing Valve with Compression Connections Tee Elbow and Integral Checks Brass Plumbing Fitting 24525

  • CASH ACME THERMOSTATIC MIXING VALVE: This Thermostatic Mixing Valve is a point-of-use thermostatic mixing valve designed to assist in the prevention of scalding.
  • this valve reduces the outlet flow to a trickle in the event of cold water supply failure.
  • COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
  • DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
  • EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • remove using a disconnect clip or disconnect tongs.
  • SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.
Check Stock

Speed Queen White Laundry Pair with TR7000WN 26 Top Load Washer and DR7000WG 27 Gas Dryer

  • The Alliance 202395P Fill Mixing Valve is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Replacement Alliance Commercial Washer Fill Mixing Valve is a 4.4 GPM (Gallons Per Minute) Mixing Valve that operates on 120V.
  • Alliance 202395P Commercial Washer Fill Mixing Valve replaces the following part numbers: 202395.
  • High quality Alliance OEM 202395P Commercial Washer Fill Mixing Valve is compatible with the following brands: Speed Queen.
  • Alliance Laundry Systems Genuine Parts are engineered and tested for leading performance.
Check Stock

Cash Acme 3/8 Inch HG135 Thermostatic Mixing Valve with Compression Connections and Integral Checks Brass Plumbing Fitting 25686

  • CASH ACME THERMOSTATIC MIXING VALVE: This Cash Acme Thermostatic Mixing Valve is a sleek and compact under-sink temperature mixing valve designed to help prevent scalding.
  • COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
  • DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
  • EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • remove using a disconnect clip or disconnect tongs.
  • SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.
Check Stock

American Standard CE-12-AS 12 gallon Point of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

American Standard CE-20-AS 19 Gallon Point Of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

American Standard CE-6-AS 6 gallon Point of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

2 Pack - Bike Tube, Presta Valve 700c x 28-35, (27x1-1/8 to 1-1/4), 48mm Presta Valve, Bicycle Inner Tube, Sunlite

  • 2 Tubes, 700c x 28-35, (27x1-1/8 to 1-1/4).
  • 48mm Presta Valve, Threaded w/Removable Core.
  • Please check the side of your tire or on your old inner tube for the proper size, valve type and valve length..
  • When changing your bicycle inner tube ALWAYS be sure to add just a little air to the tube before installing. This gives it form so it doesn't get twisted or bunch up which may cause a pinch flat. Once the new tube is installed and BEFORE fully inflating only add a few PSI to further form the tube. Inspect for an even bead of the tire to the rim on both sides..
  • Then, inflate to approximately half the desired PSI and re-inspect the tire bead to the rim again. If even beading all the way around on both sides then inflate to the recommended air pressure. This procedure is important because if the bead doesn't hook properly on the rim then as the inner tube is inflated it can sneak out between the tire and rim and then BOOM!.
Check Stock

LABOTA 24 Packs Self Watering Spikes, Adjustable Plant Watering Spikes with Slow Release Control Valve Switch for Garden Plants Indoor & Outdoor

  • 【Adjustable valve】The flow rate can be controlled. The plant watering Device with control valve can control the dripping speed of 0-60s/drip, and the sustained drip lasts for 1-15 days. Only adjust the valve to Meet your needs without complicated setup steps..
  • 【Simple and Convenient】 Installed without any tools, just drill some holes in the bottom of the bottle or cut the tail of the bottle to keep the air flowing..
  • 【Multi-Scene Application】Vegetables, potted plants, houseplants, water plants day-to-day, patio plants, herbs, hanging baskets, desk pots, hanging plants, outdoor gardens, small tree, shrubs..
  • 【Warning】Compatible with all 1.1 inch/2.8cm inner diameter, suitable for most beverage bottles, not suitable for mineral water and purified water bottles. (Measure the inner diameter of the bottle including the thread size before installation).
  • 【100% Lifetime Guarantee】We offer 100% No Risk Guarantee for every customer. If you are dissatisfied with our product，please contact us immediately you will get a partial/full refund.We take the greatest pleasure to offer the most satisfactory shopping experience to you..
Check Stock

Autolite 1100 1 Barrel Carburetor Fits 1963 to 1968 Mustang Falcon Comet straight six cylinder 170 & 200 CID engines hot air choke works with automatic and manual transmissions

  • ...ng installation and use, please contact the seller via Amazon email. We will provide you with a satisfactory after-sales treatment plan, including returns, exchanges and free accessories. Similarly, we have Professional mechanics will provide you with suggestions on how to deal with some problems..
  • The carburetor is installed on the 64 Mustang engine for testing. After you order it, you need to fine-tune the carburetor idle screw and air mixing screw..The carburetor has 2 idle screws and 1 air mixing screw.Carburetor Be applicable to 1964-1968 ford 170/200 straight 6 cyl engines.
  • This carburetor is simple in structure and easy to install.After installing the carburetor, if the fuel mixture is too rich and the exhaust pipe emits black smoke, it is necessary to adjust the idle mixing screw to reduce the fuel injection..
  • Before purchase, please check carefully whether the carburetor you need to replace is the same as this product. If necessary, please ask us or local professional auto repair personnel.This product does not include air filters and copper fittings.Fuel Filter 1/8"-27 NPT This size fits our carburetor.
  • We use an improved high-quality needle valve to improve the performance of the carburetor.Mounting aperture 10.5mm 2 hole spacing 68mm,Please c....
Check Stock

Universal Air Conditioning HA10900C Auto Part

  • 1.12mm Thickened and Wear-resistant Material: The 700x35-43C road bike tubes made of 1.18mm thickened butyl rubber are durable and wear-resistant,also heat resistant and shockproof, featuring electrical insulation and good air-tightness and preventing tire blowout..
  • Useful Accessories: The bicycle inner tubes set is equipped with 2 nylon rim strips which are installed between bicycle tube and rim, protecting tube from pierce by spoke during trip, also with 3 ABS tyre levers to help remove tube easily..
  • Easy to Replace Bike Tube: The bike tubes with rim strips and tyre levers are easy to install, and you can replace old bike inner tubes effortlessly and quickly within minutes, which are time-saving and efficient..
  • Universal Fit: The bike tubes are compatible with 700x35C, 700x36C, 700x37C, 700x38C, 700x39C, 700x40C, 700x41C, 700x42C,700x43C bike tire tubes. And the bike tubes feature even thickness for smooth usage..
  • Enjoy Safe and Comfortable Riding: The bicycle tube with tyre lever is equipped with 48mm lengthened schrader valve and valve cap, absorbing shocks on bump road and providing comfort and safe riding experience..
Check Stock