Reviews Inline Oil Flow Meter

Genuine TERA PUMP 33.5-49" IBC Totes Plug-in Electric Drum Barrel Pump with Flow Meter and Telescopic Tube for DEF/Diesel/Kerosene/Antifreeze/Agricultural Chemicals

  • Electric 12V power drum pump with flow meter and telescopic suction tube.
  • Flow Meter measures flow rate of liquid running through our pump.
  • Application: Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
  • Flow Rate: 7.1 Gallon per Minute or 26 Liters per Minute.
  • Attention: Pump is NOT Compatible with Acids, Alkalis, Corrosive media, Solvents, Acetone, Lacquer, Mineral Oils, Solvents, Turpentine, Heavy Oil or Drinking Water.
Check Stock

TERA PUMP | 4.5 GPM Electronic 35L Metered Pail Transfer Pump Flow Control Nozzle 16.5 in 22.6 in Intake Tube Fits 5 Gallon Pail Buckets Engine Oil Hydraulic Fluid DEF Gas Diesel AG Chemicals

  • Flow Rate of 4.5 Gallons/ Minute with Engine Oil (1.4 GPM) Hydraulic Fluid DEF Gasoline Diesel AG Chemicals Washer Fluid Antifreeze.
  • Suction Tube is Adjustable to 16.5 in to 22.6 in | Flexible Discharge Hose: 6 foot with Flow Control Nozzle.
  • Transfer Liquid to Cars, Boats, Tractors, ATV/UTV, Generators, Snowmobiles etc..
  • Precise Flow Rate with 35L Digital Oil Meter with LCD Display.
  • Pump, Meter, Pail Lid, and Power Adapter are Included.
Check Stock

Automotive Smoke Machine Leak Detector VXSCAN EVAP Vacuum Leakage Tester Fuel Pipe Diagnostic Tester with Flow Meter & Pressure Gauge for All 12V Vehicles

  • 【EVAP SMOKE MACHINE】VXSCAN V3 is a professional vacuum machine for car fuel pipe system leak detection. Supports EVAP system test, tightness test,....
  • 【EASY TO USE】By heating USP mineral oil or baby oil, the automotive smoke machine can be outputs lots of smoke within 30 seconds, to improve....
  • 【SMOKE FLOW METER & PRESSURE GAUGE】Equipped with pressure gauge and adjustable flow meter which helps you control the smoke effect easily. When....
  • 【Air Mode & Smoke Mode】The V3 smoke leak tester adopts an independent switch control design, the air mode independently controls the built-in air....
  • 【WIDELY COMPATIBILITY】Our package includes all accessories (Oil not included), it supports detect the leaks of multi pipe systems on cars,....
Check Stock

Universal Electric Fuel Pump Kit 12v 3-6 PSI Low Pressure with Fuel Filters 10 Hose Clamps 6.56 FT 5/16" ID Fuel Line Replacement For Carburetor Lawn Mower Gas Diesel Fuel Transfer Pump

  • This is a 12V fuel pump with fuel filter kits, universal for gasoline and diesel (exclude alcohol) engine, fit for all 12 volt cars, trucks, carburetor, lawn mower, boats & generators.
  • Inline Fuel Pump Kit Includes: 3-6 PSI Electric Fuel Pump, 1PC Socket Wire, 1Pc Fuel Filters, 2 Meter/6.56-Foot 5/16" ID Fuel Line, 10Pcs Hose Clamp.
  • Low Pressure Fuel Pump: Voltage: 12 Volt, Output Pressure: 3-6 PSI, Flow Reaches: 70 L/H, Hose Size: 8 mm ( 5/16 inch ), Material: Copper Clad Aluminum, Plunger-type of fuel supply.
  • Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly.
  • Upgraded Fuel Filter: Upgraded Filter Paper The number of pleats of the filter paper is dense, and it sticks firmly to the shell without gaps.
  • It can filter out impurities, dirt and fuel particles to prevent clogging of the carburetor, only allow clean fuel to flow in and keep the engine charged.
  • 3-Layer Thickened Fuel Line: Length: 6.56 feet(2m), Thickness: 2.99mm.
Check Stock

Ancel S3000 EVAP Automotive Smoke Machine Leak Vacuum Diagnostic Tester with Oil Level Gauge & Air Flowmeter for All Vehicle Boat Truck Motorcycle

  • ...bine system, intake manifold, vacuum line, etc..
  • [High performance and high-quality metal structure] Compared to other simple smoke leak diagnostic testers, the ANCEL S3000 smoke machine not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure from 0.8 to 14.5 psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process..
  • [Pressure gauge+adjustable flow meter] You can judge whether the tested system has a leak by the pressure change of the pressure gauge. By adjusting the size of the flow meter, you can also better control the amount of visible smoke to locate specific leaks. There are separate air mode and smoke modes to meet your different needs..
  • [Easy operation] A few simple steps can help you detect leaks in the vehicle system. (1) Add tobacco oil (USP mineral oil/baby oil), you need to buy it separately. (2) Check the power cord (12V DC car battery). (3) Connect the system and test for leaks..
Check Stock

Vehicle Maintenance Log Book: Easy-to-use Vehicle Service and Repair Record Book

  • Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
  • Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
  • Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
  • Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
  • Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.
Check Stock

Shaded Pole Brake Motor, 115V AC 60 Hz, 50 RPM, UL CSA Listed, ELE-030

  • ...zles showcase industrial strength materials and experienced design. The internal mixing element is built using High-Strength Polyacetal known for its stiffness and stability under high pressure. The element is surrounded in a lightweight, yet durable casing made of high-quality Polypropylene..
  • PRECISION OUTLET - Our inline mixer features a Stepped outlet type that allows you to control the flow of adhesive. You can also attach an external spreading device for more control..
  • INDUSTRY STANDARD BELL MOUNT - Our epoxy mixer is fixed with a bell mount cartridge attachment for large volume dual adhesive cartridges. Fits all cartridges, including 200cc, 400cc, and 600cc. Compatible with a Meter Mix Dispenser..
  • PRODUCT STATISTICS - Inner Diameter: 0.394/10.00 (inch/mm). Outer Diameter: 0.549/13.94 (inch/mm). Length: 10.87/276.10 (inch/mm). Element Number: 24. Part Number: BT MC 10-24.
Check Stock

CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter Portable Liquid Flow Meter with  S1+M2 Transducers for Copper/PVC Pipe DN15-700mm 1/2-28\ ((Old or New Panel))

  • S1+M2 TRANSDUCERS: Easy to setup the transducers on the pipe and enter the required information in the control unit.No need to destroy the pipeline and stop production during the measurement process.S1(DN15-100mm, 1/2-4"), M2(DN50-700mm, 2-28").
  • DIGITAL DISPLAY: The Ultrasonic Flowmeter can display cumulative flow, instantaneous flow, velocity, and working status at the same time. Accuracy: 1%, linearity: 0.50%, repeatability: 0.20% accuracy: ±1%, calibration certs included. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
  • DATA STORAGE AND OUTPUT: This Ultrasonic Flow Meter has a built-in data logger, which can store up to 2000 lines of measurement data. And you can download the logged data onto PC through the RS232 interface..
  • LONG STAND TIME: This Flow Meter is equipped with a built-in high-capacity rechargeable battery, which can support the flowmeter to work continuously for up to 12 hours..
  • WIDE APPLICATION: Come with S1+M2 transducers, and the measuring range is DN15-700mm, 1/2-28". It can work on Copper pipe, PVC pipe to detect the flow of liquids such as sea water, alcohol, river water, industrial sewage, lubricating oil, diesel, fuel oil, etc.N....
Check Stock

Separating Roller, Smooth Holder Unit for ZCM1000, 1100, 2000 and 2200 Electric Tape Dispensers, ZCM1000P

  • ...zles showcase industrial strength materials and experienced design. The internal mixing element is built using High-Strength Polyacetal known for its stiffness and stability under high pressure. The element is surrounded in a lightweight, yet durable casing made of high-quality Polypropylene..
  • PRECISION OUTLET - Our inline mixer features a Stepped outlet type that allows you to control the flow of adhesive. You can also attach an external spreading device for more control..
  • INDUSTRY STANDARD BELL MOUNT - Our epoxy mixer is fixed with a bell mount cartridge attachment for large volume dual adhesive cartridges. Fits all cartridges, including 200cc, 400cc, and 600cc. Compatible with a Meter Mix Dispenser..
  • PRODUCT STATISTICS - Inner Diameter: 0.366/9.29 (inch/mm). Outer Diameter: 0.500/12.70 (inch/mm). Length: 9.12/231.65 (inch/mm). Element Number: 24. Part Number: BT 160-824.
Check Stock

Oil Fluid Extractor Pump Suction Gun Transparent Body Changer Vacuum 200cc Chamber Capacity Manual Water Suction Convenient Tool No Leaks No Overfills Hand Gear Transmission With Cartoon soft adhesive

  • 【OIL TRANSFER PUMP 】The electronic oil meter gun with rigid tube and manual tip or flexible hose and semi-auto tip, with the appropriate connection to establish a controlled flow through the meter. Used for filling fluid such as gear oil, engine oil, antifreeze, it is a great oil filling equipment for factories, gas stations, etc..
  • 【SPECIFICATIONS 】5-digit liquid crystal display for both volume each time and total.
Check Stock