Reviews Injection Test Bench

Goupchn Multimeter Automotive Test Leads Kit with Wire Piercing Clip Puncture Probes 4mm Banana Plug Extension Test Cable Set

  • Both ends of this test leads are injection molded standard 4mm banana plugs. Straight plug to right angle plug. Length: 3 ft..
  • The inner core of the test lead is oxygen-free copper wire. The material of the banana plug is pure copper, and the injection layer is ABS + PA. So the test lead is more soft, easy to use and has a long service life..
  • Piercing probes can puncture and clamp the cables, freeing your hands. There is no need to strip or damage the cable during use. Suitable for piercing cables with a diameter less than 4mm..
  • The end of the probes is a 4mm standard banana socket, which can be perfectly connected with the attached test leads. With the puncture mode in the opposite direction, the puncture effect will be better..
  • Package include: 2PCS male to male 4mm banana plug multimeter test leads, 2PCS wire piercing probes red + black, 8PCS replaceable probes set..
Check Stock

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

  • Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
  • Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
  • Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

KZYEE KM50 Power Circuit Probe Kit - 12V\\/24V Automotive Circuit Tester for Frequency, Duty Cycle, Fuel Injection Circuit, AC\\/DC Resistance, Digital Voltage, Activate Component Electrical System Tool

  • [More Accurate Probe Tester] - The KZYEE KM50 Power Circuit Probe Kit is an improved version of the KM10 (DC voltage, AC voltage, resistance and diode). It also has the latest improved functions for testing signal frequency, duty cycle and fuel injection. With such a versatile tool, the technician can trace and identify the problem circuit and rule out good circuits, speeding up the diagnostic process and revealing the true cause of the electrical problem much easier..
  • [3 Advanced Testing Modes] - If the vehicle has difficulty starting, acceleration, fuel consumption, etc., it’s necessary to check the fuel injection system. KM50 Fuel Inject Test is specially designed for quick and easy diagnosis of fuel injection circuit. It can be quickly connected to the circuit and displays all the information needed. The addition of Frequency and Duty Cycle modes, gives KM50 the most value than others..
  • [Additional Piercing Probe] - The probes are fully insulated which provide added protection. If you don’t want to disconnect cables to find the connectivity and electricity, use piercing probe kit, you can test the signal in a simple way without damaging the cable..
  • [Activate Components] - With the ability to power components such as radiator fans, starters....
Check Stock

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

Pac-Man Adventures in Time - PC

  • Premium Variable Friction Hinges: Heavy duty hinges hold the side wings to the mid-frame and allow for smooth repositioning at any angle depending on....
  • Open Air Design: The open-air nature of the design provides unrestricted access to fresh air to all components in the system. The optional fan mounts....
  • Un-matched Hardware Support: For its size, MasterFrame 700 sports an unmatched level of hardware compatibility. It is designed to fit any component....
  • Extreme Water-Cooling Support: Designed with water-cooling in mind, MasterFrame 700 provides a flexible pump and reservoir mounting location and....
  • Test Bench Mode: Thanks to its modular design, MasterFrame 700 can lay down horizontally and transform into an ultra-featured premium Test Bench.....
Check Stock

OTC 6550PRO Professional Master Fuel Injection Service Kit

  • Perform fuel pressure testing diagnose weak fuel pumps or restricted filters test for fuel flow and perform leak-down tests.
  • 0-100 pounds per square inch fuel pressure Gauge.
  • 47 OTC fuel injection system adapters each with a quick connect Schrader Valve.
  • 1997-2008 fuel injection service application manual.
Check Stock