Reviews Injection Part

Michigan Motorsports Rack Cap Fitment for 1994 thru 1998 Dodge Cummins, Fits all P7100 injection pumps 2500 3500

  • Rack Cap for 1994-1998.5 Dodge Cummins Diesel & Bosch P7100 Pump,.
  • The Billet Rack Cap allows full rack travel of the P7100 injection pump. This Rack Cap is drilled deeper than the stock rack cap to provide more rack travel. By allowing 4mm more travel, the horsepower gain will be impressive!.
  • Fits ‘94-‘98.5 Dodge Cummins and all P7100 injection pumps.
  • Replaces: Bosch part 2095 and Bosch part #2423462000.
  • Made of the highest quality materials available..
Check Stock

4c3z9f838a 1845428C92 2004-2006 f250 f350Fuel injection pressure sensor Replacement for ford 6.0 powerstroke icp sensor

  • Manufacturer Part Number:1845428C92£¬4C3Z-9F838-A.
  • OEM Number Part: 4C3Z9F838A£¬5C3Z-9C968-CA£¬5C3Z9C968CA.
  • Replaces #:1845428C92, 4C3Z9F838AB, 3PP6-12,Easy to install, no installation instruction included.
  • Fuel Injector Injection Pressure Sensor Compaitble With 2004-2010 International Trucks With 6.0L Diesel Engine Replaces Ford 4C3Z9F838A, 1845428C92, AP63460, ICP101.
  • Package Content: 1 PCS 1845428C92 Fuel Injection Pressure Sensor.
Check Stock

JDMON Compatible with FICM 6.0 Powerstroke Fuel Injection Control Module Ford F250 F350 F450 2003-2007 Excursion 2003-2005 E350 2004-2010 Replaces 904-229 1845117C6 3C3Z12B599AARM 4C3Z12B599AARM

  • Compatible with FICM Ford F250 F350 F450 F550 6.0L 2003-2007，E-350 E-450 Super Duty 2004-2010，Ford Excursion 6.0L 2003-2005，Ford E-350 Club Wagon 2004-2005.Please use the fitment in the upper left corner to check if your vehicle is compatible with the product..
  • REPLACE PART NUMBER:904-229,3C3Z12B599AARM,4C3Z12B599AARM,4C3Z12B599ABRM,4C3Z12B599BARM,5010121R94,1845117C2,1845117C6.Direct replacement of the truck's original fuel injection control module.Easy-to-install, plug and play repair solution-no programming necessary..
  • REPLACE FUEL INJECTION CONTROL MODULE: If your vehicle has a fuel injection fault code. It may be necessary to replace your fuel injector control module （FICM）. After replacing it, you can make your 6.0 Powerstroke truck run normally..
  • HIGH QUALITY:Vehicle try-on testing has been conducted on this part to ensure a trouble-free performance。100% re-welding of key components ensures excellent electrical connections, extending the life of the fuel injection control module..
  • QUALITY SERVICE:We are committed to providing every buyer with a good shopping experience. If you have purchased our products. Please feel free to contact us if you have any questions. We will do our best to solve them for you..
Check Stock

Jelly Filled Donuts

  • 【STAINLESS STEEL】- The churros machine is made of high quality stainless steel, corrosion resistant and durable. Ideal for filling cream and jelly in Latin fruit or donuts and other pastries..
  • 【EASY TO USE】- The extended injection port can make every part of the long churros filled with jam, and the injection opening is inclined downwards to facilitate the flow of jam into the doughnut. Excellent for filling creams and jellies inside the churros and other pastries..
  • 【MANUAL OPERATION】- The churros filler maker needs to put the jam into the barrel, align the churros to be filled with the injection port, press the handle to inject the jam into the churros, and lift the handle up when filling finished..
  • 【SUITABLE FOR】- This machine has a capacity of 5L. Suitable for tea restaurant equipment, cake room equipment, coffee shop equipment, bakery equipment, western food shop equipment etc..
  • 【QUALITY ASSURANCE】- The design is novel, easy to use, does not take up too much space, let you operate better. We ship directly from the US warehouse. Feel free to contact us if you....
Check Stock

ICP Sensor with Harness Kit, Injection Control Pressure, Compatible with Ford Vehicles - 7.3 Powerstroke E350, F250, F-350 Super Duty - Replaces F6TZ-9F838-A, F4TZ9F838A, 1807329C92, CM5227

  • Replacement Injection Control Pressure Sensor - The ICP sensor or Injection control pressure sensor is found on 's Powerstroke 7.3 L diesel engines. The ICP sensor is responsible for monitoring oil pressure being passed on to the PCM to pressurized fuel injectors using the IPR (Injection Pressure Regulator) for proper vehicle operation..
  • Compatible Replacement for Ford Vehicles With 7.3L Powerstroke Engines - 2003 E-350 Club Wagon | 1995 - 1998 E-350 Econoline | 1995 - 2002 E-350 Econoline Club Wagon | 2000 - 2003 Excursion | 1994 - 1996 F-250 | 1999 - 2003 F-250 Super Duty | 1994 - 1997 F-350 | 1999 - 2003 F-350 Super Duty |. The ICP sensor can easily be located inside the engine bay behind the alternator..
  • Replaces Part# 1807329C92, ICP102, F4TZ-9F838-A, F6TZ-9F838-A, CM5227. This ICP sensor found on 's 7.3L Powerstroke engines are popular for having oil leaks. If you are experiencing oil coming out of the ICP Sensor's electrical connector, weird noises on idle during first starts, hesitation or misfires then you may have a problem with your ICP sensor..
  • OEM Fit, Quality, Finish - While this is NOT a g....
Check Stock

DRICORE PRO Concrete Repair Crack Injection Expanding Foam (Step Two) | Polyurethane for Sealing Indoor & Outdoor Cracking in Home, Wall Filler, Basement, and More | Moisture Tolerant

  • NEW, EASY, SAFE: DRICORE PRO Concrete Repair Crack Injection Expanding Foam uses an advanced, moisture resistant formula to create the perfect, high-strength injection foam to fill and fix cracks, pits, holes, and more.
  • THIS ITEM IS STEP TWO OF THREE: Follow the directions closely. This is part two of a three part repair and sealant system. This product is meant to be used with DRICORE PRO Concrete Crack Prep Surface Paste to fully cover and fill cracked, broken, or split concrete and DRICORE PRO Concrete Repair Carbon Fiber Reinforcement Kit to strengthen the structure.
  • GIVE YOUR PROJECT SOME POWER: Our unique crack repair system allows you to finish the job with additional carbon fiber reinforcement (sold separately) and Injection Ports (sold separately)..
  • COST EFFECTIVE, SIMPLE TO USE: Fix your clients’ apartment, condo, or house. Combine with carbon fiber reinforcement to strengthen foundation and basement wall repairs. Save both time and money by using our specially engineered repair system for your next project or concrete service job. Perfect for any size of workplace or household!.
Check Stock

Giro Semi Adult Snow Goggles - Black Core Strap with Amber Scarlet/Yellow Lenses (2021)

  • INCLUDES - Giro Semi Ski Goggles with Black Core Frame, Amber Scarlet Lens (40% VLT - Mixed Clouds), and Yellow Lens (84% VLT - Night/Race).
  • EXV FRAME - Classic/retro style goggle featuring an injection-molded cylindrical lens. Anti-Fog Coating will keep your vision crisp and clear in all conditions..
  • INJECTION MOLDED CYLINDRICAL - Injection molding a cylindrical lens helps refine optics and minimize distortion that can occur in thermo-formed cylindrical lenses. Every lens is protected by a durable, scratch-resistant coating..
  • SEAMLESS COMPATIBILITY WITH GIRO HELMETS - For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggles for an exceptional fit and dependable, worry-free function..
  • TRIPLE FACE FOAM - Three part system that provides a plush contact layer against your face, a super soft middle layer that allows maximum contour, and a durable back layer connected to the goggle frame..
Check Stock

Giro Dylan Womens Snow Goggle - Black/White Data Mosh Strap with Rose Spectrum/Yellow Lenses

  • EXV FRAME FOR WOMEN - Classic/retro style goggle featuring injection-molded cylindrical lens with Optics by ZEISS. Anti-Fog Coating to keep your vision crisp and clear in all conditions..
  • INJECTION MOLDED CYLINDRICAL - Injection molding a cylindrical lens helps refine optics and minimize distortion that can occur in thermo-formed cylindrical lenses. Every lens is protected by a durable, scratch-resistant coating..
  • SEAMLESS COMPATIBILITY WITH GIRO HELMETS - For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggles for an exceptional fit and dependable, worry-free function..
  • TRIPLE FACE FOAM - Three part system that provides a plush contact layer against your face, a super soft middle layer that allows maximum contour, and a durable back layer connected to the goggle frame..
  • INCLUDES 2 LENSES - one sun/all-conditions lens & one low-light lens.
Check Stock

Briggs & Stratton 192914GS Chemical Injection Service Kit for Pressure Washers

  • Replaces Briggs and Stratton parts 231B2327GS, 11587628PGS, and 121B2126GS.
  • Consult owners manual for proper part number identification.
Check Stock

Polaris 4-Seat Poly Sport Roof Black

  • Genuine Polaris Product, OEM Part Number: 2883781.
  • Injection-molded rigid design, Resists distortion from the elements, Designed to fit over the GENERALS front stock visor.
  • Integrated rain channels divert water away from the cab,360 degree seal keeps out rain, snow and dust.
  • Replaces OEM Part Numbers: Polaris: 2881974.
Check Stock