Reviews Injection Mould Tool

2xhome Set of 2 Clear Louis Ghost Dining Armchairs Polycarbonate Designer Acrylic Transparent Crystal Chair with Arms Glass Modern Mid Century Victorian See Through for Desk Kitchen

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
  • Made from one single mould from crystal clear polycarbonate (stronger than acrylic).
  • Stackable, Scratch Resistant, and UV Protected.
  • Suitable for commercial and residential indoor & outdoor use.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

E-cowlboy Injection Pump Gear Puller & Engine Barring/Rotating Tool for Cummins Engine VE P7100 VP44 4BT 6BT Diesel, B/C Series Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesel

  • Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
  • Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
  • Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.
Check Stock

Silicone Planter Mold for Concrete Flower Pot Making, Square DIY Succulent Plant Cactus Planter Pot Mould, Homemade Cement Flowerpot Molding Tool (Type B - 12CM)

  • ...ts Mold are consists of ABS plastic hard shell frames and Silicone Inner material. Sturdy outer shell to support concrete weight without wall bulging outwards.
  • 2. The model is used to make Plant pot/ Flower pots/ DIY Flower Pot Model/ planter pot model or some other decorations.
  • 3. Smooth surface, easy to demold (demould need 24-36 hours)/ clean and re-use. (Note: If to make flower pot, please use Cement or concrete)..
  • 【Square Mini Flower Pot Silicone Mould】- 1. Type A (10 CM): Mold Size about 11.2x11.2x10.5cm/ 4.4x4.4x4.13inch (LxWxH), Flower Pot Finished product size: 10x10x10cm/ 3.9x3.9x3.9inch (LxWxH).
  • 2. Type B (12 CM): Mold Size about 15.5 x15.5x12.3 cm/6.1x6.1x4.8 inch (L x W x H), Finished Product Size: About 12x12x12 cm/ 4.7x4.7x4.7 inch(L x W x H). Perfect for small green leaf plant/ succulent/ Cacti and other mini size plants. DIY Flower Pot Model, add the happy feeling in daily life..
  • 【Multi-usages Flower Pot Making Molds, DIY Silicone Planter Molds for Concrete Succulent Pots Making】- 1. This mold can be used to as cement/ concrete/ clay/ plaster/ polyester resin molding tool, to make succulent planters or containers.
Check Stock

Yoursme Injection Pump Gear Puller Removal Installer Tool & Engine Barring/Rotating Tool for Cummins and Dodge Engines

  • APPLICATION: Injection Pump Gear Puller works on Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT. Engine Barring/Rotating Tool works on Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • SUPER MATERIOR: Made from high standard 42CrMo steel with Black Finish, resisting rust and impact, Great Strength and Durability, ensures reliable long-term service..
  • USE INSTRUCTION： Injection Pump Gear Puller--Used to remove the injection pump gear with ease and fast. Engine Barring/Rotating Tool--Just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • PACKAGE INCLUDE: 1PC Injection Pump Gear Puller with two heavy duty flange bolts.
  • Satisfaction Guarantee: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months’ Warranty. If you have any problems about our products, please feel free to contact us..
Check Stock

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock

White Adjustable Chocolate Funnel for Baking Cake Decorating Tools Kitchen Accessories Easy Operating Funnel

  • Handle length:14cm/5.5 inch.Funnel height:13cm/5.1 inch.
  • You can operate it just one hand,the push-botton control flow easily.
  • It could be used as cake mould,ice mould frozen tool and other kitchen tools.
Check Stock

Silicone Flower Pot Mold,Round Succlent Flower Pot Mold Silicone Cement Mold Handmade Gypsum Concrete Plants Pot Vase Mould Plaster Art Decor Home Garden

  • 【DIY Silicone Flower Pot Mold】Made of silicone material, soft, durable, can be reuse, non-toxic and long time to use. Heat-resistant temperature....
  • 【Multi Usages Succulent Plant Vase Planter Cement Molds Concrete Clay Mould,Concrete Molding Tool】This mold can be used to as cement/ plaster/....
  • 【Home Garden Decoration Craft Concrete Planter Pallet Mould】Please use Cement or concrete if to make flower pot.
  • 【Reusable DIY Molds】This reusable mold features novel design, soft texture, changeable style and is easy to release and clean. You can use it....
  • 【Package Includes】 1 pcx Silicone Flower Pot Mold,can be used for Succulent Plant Flower Pot, Cement Fleshy Plant Flower Pot Silicone Mould, DIY....
Check Stock