Reviews Injection Cup Mould

0.38 Pens Fine Point Smooth Writing Pens Ultra Fine Retractable Pens,Black Permanent Ink,0.38mm Tip Ultra Fine Gel pen

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel....
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel....
  • Ink – High-Quality Black Permanent Inks From "Mikuni "are Waterproof and Sun-proof, and can be archived permanently..
  • Tip - 0.38mm Ultra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten....
Check Stock

2xhome Set of 2 Clear Louis Ghost Dining Armchairs Polycarbonate Designer Acrylic Transparent Crystal Chair with Arms Glass Modern Mid Century Victorian See Through for Desk Kitchen

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
  • Made from one single mould from crystal clear polycarbonate (stronger than acrylic).
  • Stackable, Scratch Resistant, and UV Protected.
  • Suitable for commercial and residential indoor & outdoor use.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Dinosaur birthday Paper Muffin Cupcake Liners case Baking Cups 100 pcs,Standard Size 2x1.25inch (dinosaur)

  • Size :base 50mm (2 inch) height 30mm(1.25inch) expanded diameter 115mm (4.5 inch) 25pcs/stack 100pcs=4stacks.
  • Material: 40g foil paper/greaseproof paper, food grade paper, safe and odorless.
  • grease resistant liners inside, high temperature resistant.
  • Methods of use: take the cups one by one from the bottom of nesting cups to prevent any deformation,put the cups on the baking mould and pour the finely mixed cake ingredients into the cups ensuring the amount of cake liquid less than 70% of cup capacity,bake 15 minutes at 350 ℉.
  • Cautions: no direct exposure to fire and not suitable for cooking.
  • no water or oils are allowed in the cup mould.
  • the highest baking temperature should be not more than 250 degrees Celsius and the baking time should not be too long to avoid damage to the cups and food..
  • Storage conditions: room temperate,no expousre to direct sunlight.
Check Stock

XIZE SH Black Ink Pens Waterproof No Smudge Pen for Writing Cool Pens,Fine Tip 0.5mm,12-Count 3345

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel Material is Softer and Feels Better.After a Long Period of Storage and Use, It Can Always Refuse Hollowing and Slipping..
  • Ink – Dynamic Gel Ink Formula that's Mikuni(R) High Quality Ink for Quick-Drying and Colorfast Writing..
  • Tip - 0.5mm Extra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten Carbide Pen Ball, Wear-Resistant, Corrosion-Resistant, and More Suitable for Long-Term Writing..
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel Itself,Thereby Improving the Actual Sense of Use..
  • Pack - Includes 5 black gel ink pens. Box Size:5.82*2.28*0.75 Inch(148*58*19mm).
Check Stock

Rose Gold Foil Metallic Paper Muffin Cupcake Liners case Baking Cups 100 pcs,Standard Size 2x1.25 inch

  • Size :base 50mm (2 inch) height 30mm(1.25inch) expanded diameter 115mm (4.5 inch) 25pcs/stack 100pcs=4stacks.
  • Material: 40g foil paper/greaseproof paper, food grade paper, safe and odorless.
  • grease resistant liners inside, high temperature resistant.
  • Methods of use: take the cups one by one from the bottom of nesting cups to prevent any deformation,put the cups on the baking mould and pour the....
  • Cautions: no direct exposure to fire and not suitable for cooking.
  • no water or oils are allowed in the cup mould.
  • Storage conditions: room temperate,no expousre to direct sunlight.
Check Stock

BeswinVR Halo Strap for Oculus Quest 2 and Original Quest- Virtual Reality Accessories- White Color

  • 【Latest Adapter】Design for Quest 2, Quick install without D.I.Y spacer. The new adapter tighten fit with Quest 2 well..
  • 【Latest Version】2020 ergonomic Designed head strap for Oculus Quest, No squeeze on face and nose, 50: 50 Balance weight between Oculus quest....
  • 【Comfort and Convenience】Easy-to-use size adjustment dial and hard-sided construction, 99% comfortable like HTC Vive Audio strap..
  • 【Packing List】1x Halo Strap, 2x PU leather pad, 1x head top belt..
  • 【Duability】100% injection mould made, No any 3D print, duable and long-life use at home, VR arcade and VR parks..
Check Stock

Geiserailie 4 Pieces Wine Glass Holder Resin Mould Serving Tray Epoxy Mould Shot Wine Rack Silicone Mould Beer Paddle Holder Moulds with Coaster Casting Moulds for DIY Handmade Agate Home Decorations

  • Product information: you will receive 1 piece wine glass serving tray mould: about 19.5 x 14.5 cm/ 7.68 x 5.71 inch, 1 piece wine rack mould, about 25 x 10.6 cm/ 9.84 x 4.17 inches, 2 pieces coaster moulds, about 13 x 10 cm/ 5.12 x 3.94 inches, 4 pieces in total, to meet your different DIY needs, and the finished product can be applied as coasters, wine glass holders, and serving trays.
  • 4 Hole shot glass resin moulds: the paddle tray resin mould contains 4 holes with a diameter of 1.38 inches to accommodate beer mugs and tea cups, which can be applied for wine glass display, wine glass fixing and wine glass trays, convenient accessories in daily life.
  • Functional usage: finished glass cup holder is suitable for serving trays, finished wine glass holder will be practical storage and display item, 2 irregular coaster silicone moulds can be applied to make coasters of various cups, ideal for bars, party, home and other places.
  • Reliable to use: our resin casting moulds are made of silicone, soft to touch and not easy to break, the surface of the mould is smooth and no polishing is required, help you to make delicate crafts, and ....
Check Stock