Reviews Industrial Iot Memory Cards

SanDisk Industrial 16GB Micro SD Memory Card Class 10 UHS-I MicroSDHC (Bulk 50 Pack) in Cases (SDSDQAF3-016G-I) Bundle with (1) Everything But Stromboli Card Reader

  • Bundle includes (50) bulk lot SanDisk 16GB Industrial microSD memory cards in Jewel Cases and (1) Everything But Stromboli Multi-Slot Card Reader - Includes SD, Micro SD, M2, and MS slots for easy transfer.
  • Made to last through the most rigorous of industrial conditions, SanDisk Industrial TF cards will limit costly maintenance repairs since they last longer and will sustain your systems longer with their extended product life cycle.
  • Specs and features include: -25 to 85 degree C operating temperature range, Advanced memory management FW with power immunity, auto manual read refresh, wear leveling, and ECC, health meter status, programmable ID, secure FFU, Dynamic Bit Flip Protection, plus much more.
  • Reliable and durable: shockproof & vibration proof, temperature-proof, waterproof, and X-ray-proof.
  • In additional to industrial use, these high endurance SanDisk cards are also great for home security systems such as Wyze cameras, dash cam video, monitoring or surveillance devices, Raspberry Pi, and other devices that need continuous recording with high performance and endurance.
Check Stock

AEDIKO 5pcs IPX IPEX U.FL to RP-SMA Female Pigtail Antenna Bulkhead Mount WiFi Cable 35cm for WiFi Router Network Card Adapter

  • Pigtail Antenna: Connector: RP-SMA Female Bulkhead Mount.
  • Function:To Maximize Signal Power, Ensure the Highest Quality of all Types of Connected Frequency Equipment, and also Eliminate the Attenuation of Signal Power.
  • Wireless Range: Antenna WiFi Cable for Intel 7260NGW 7265NGW 8260NGW 8265NGW 9260NGW NGFF Wireless Card & M.2 (NGFF) WiFi / WLAN / 3G / 4G / LTE Modules.
  • Wide Application: WiFi IP Security Camera.
  • Wireless Video Surveillance DVR Recorder.
  • Truck RV Van Trail Rear View Camera, Reverse Camera, Backup Camera, Industrial Router IoT Gateway Modem, M2M Terminal, Remote Monitoring and Control, Wireless Video, Wireless HDMI Extender etc..
  • Notice: This IPEX IPX U.FL Pigtail Cable Only Use for M.2 NGFF Interface Network Cards, Can NOT Fit Mini PCI-E Interface Network Cards, Please Check Your Network Cards Before Purchasing.
Check Stock

SanDisk Industrial 8GB Micro SD Memory Card Class 10 UHS-I MicroSD (Bulk Pack) in Cases (SDSDQAF3-008G-I) Bundle with (1) Everything But Stromboli Card Reader (8GB, Pack of 100)

  • Bundle includes bulk lot SanDisk 8GB Industrial microSD memory cards in Jewel Cases and (1) Everything But Stromboli Multi-Slot Card Reader - Includes SD, Micro SD, M2, and MS slots for easy transfer.
  • Made to last through the most rigorous of industrial conditions, SanDisk Industrial TF cards will limit costly maintenance repairs since they last longer and will sustain your systems longer with their extended product life cycle.
  • Specs and features include: -25 to 85 degree C operating temperature range, Advanced memory management FW with power immunity, auto manual read refresh, wear leveling, and ECC, health meter status, programmable ID, secure FFU, Dynamic Bit Flip Protection, plus much more.
  • Reliable and durable: shockproof & vibration proof, temperature-proof, waterproof, and X-ray-proof.
  • In additional to industrial use, these high endurance SanDisk cards are also great for home security systems such as Wyze cameras, dash cam video, monitoring or surveillance devices, Raspberry Pi, and other devices that need continuous recording with high performance and endurance.
Check Stock

SanDisk Industrial 8GB Micro SD Memory Card Class 10 UHS-I MicroSD (Bulk Pack) in Cases (SDSDQAF3-008G-I) Bundle with (1) Everything But Stromboli Card Reader (8GB, Pack of 50)

  • Bundle includes bulk lot SanDisk 8GB Industrial microSD memory cards in Jewel Cases and (1) Everything But Stromboli Multi-Slot Card Reader - Includes SD, Micro SD, M2, and MS slots for easy transfer.
  • Made to last through the most rigorous of industrial conditions, SanDisk Industrial TF cards will limit costly maintenance repairs since they last longer and will sustain your systems longer with their extended product life cycle.
  • Specs and features include: -25 to 85 degree C operating temperature range, Advanced memory management FW with power immunity, auto manual read refresh, wear leveling, and ECC, health meter status, programmable ID, secure FFU, Dynamic Bit Flip Protection, plus much more.
  • Reliable and durable: shockproof & vibration proof, temperature-proof, waterproof, and X-ray-proof.
  • In additional to industrial use, these high endurance SanDisk cards are also great for home security systems such as Wyze cameras, dash cam video, monitoring or surveillance devices, Raspberry Pi, and other devices that need continuous recording with high performance and endurance.
Check Stock

PUSOKEI Desktop Computer Mainboard for Intel G41M LGA775, G41M LGA775 Series Computer Motherboard,6 Channel Audio,2xDDR3/PCIE X16/USB3.0/SATA/IDE/RJ45/COM/VGA/Pci

  • PCI+PCI‑E 16X: This industrial motherboard supports expansion cards such as network adapters, sound cards, and hard disks of PCI+PCI‑E 16X port..
  • Stable Capacitor Filtering: This industrial motherboard provides more stable capacitor filtering and performance..
  • 5 PCI Ports: This industrial motherboard possesses 5 PCI ports to meet various expansion needs..
  • Data Transmission: This industrial motherboard provides VGA expansion pin, LPT print port and COM serial port for data transmission..
  • Wide Application: This industrial motherboard supports 2 x DDR3 memory, 4 x SATA hard disk port, suitable for industry, industrial control equipment..
Check Stock

DORHEA ESP32 Cam WiFi Bluetooth Development Board with OV2640 Camera Module + Micro USB to Serial Port CH340C 4.75V-5.25V Nodemcu for Raspberry Pi - 3 Set

  • The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC..
  • ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications..
  • ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC, ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module..
  • The esp32 kit module can work independently as the smallest system..
  • Esp32 cam adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions..
Check Stock

VONETS Industrial Mini 5GHz WiFi Bridge/Router WiFi to Ethernet Adapter 802.11a/n/ac(900Mbps) 2 RJ45 Ports /Antennas USB/DC Powered (DC5V-24V) for DVR Monitoring PLC Medical Device VAP11S-5G

  • Industrial Mini 5GHz WiFi Bridge/Router(small size).
  • Can achieve WiFi to Wired or Wired to WiFi function(Ethernet to WiFi or WiFi to Ethernet convert).
  • Support WiFi 802.11a/n/ac, WiFi rate: 900Mbps.
  • 2 Ethernet ports 10/100Mbps adaptive,(USB/DC power supply cable.
  • One 10/100Mbps adaptive Ethernet port (one 30cm cable with 1 male RJ45 port)..
  • Support two kinds of application methods: Router mode (support WiFi WAN up link and WAN/LAN exchange).
  • WiFi Bridge ( IP layer or MAC layer transparent transmission).
  • Powered by wide voltage DC5-24V(Typical 5V/2A, ripple less than 100mV), two-stage automatic overvoltage protection (Protection voltage upper limit 27V),USB or DC optional powered mode.
  • 1 Fixing Kit and 1 Industrial DC connector, more suitable for industrial applications.
  • Support SSA signal strength detection reporting function,motion detection function and memory hotspot(Up to 100) automatic matching connection function, realize to WiFi motion applications.
  • WiFi Tx Power:19dBm/23dBm optional(Enhanced Power), 2 X 3dBi external antennas.
  • Point-to-point transmission distance: maximu....
Check Stock

Nelawya 5.8dBi LoRa Antenna N Type Male LoRawan Antenna for RAK MNTD V2 Nebra Bobcat Sensecap Helium Hotspot Miners Grey

  • Frequency Range:902MHz - 928MHz. Gain:5.8dBi.
  • Ultra Low Loss Cable:3 Meter(10ft) Long N Female to RP-SMA Male Low Loss KMR200 Cable Allowing Install The Antenna indoor/outdoor.
  • Industrial Grade Construction Design, Quality Build and Durable Fiberglass Finish Make it More Suitable for All-Weather Operation. Built-in Pure Copper Oscillator for Performance Ultra Distance Signal Transmission..
  • Works with Most of LoRa IoT Application to get more witnesses for more HNT rewards.. Compatible with RAK Bobcat HNT Hotspot Miner, Helium HNT Mining, Low Data Rate Communication Networks, Long Distance LoRa Nodes, IoT & M2M Nodes, Industrial & Environmental Monitoring, Smart Metering Applications, Inventory Tracking, Vending Machine Data & Monitoring, LoRaWAN, Multipoint and NLOS Applications, Wireless Video and Security Systems..
Check Stock

Stemedu ESP32-CAM ESP32 Camera Module WiFi + Bluetooth Dual Cores Development Board for Arduino with 2.4GHz Antenna, Built-in 520 KB SRAM, External 4M PSRAM

  • Authentic ESP32-CAM from Ai-Thinker. Tutorial link is Document link https://randomnerdtutorials(DOT)com/?s=ESP32-CAM.
  • ESP32 only needs a few peripheral devices to achieve powerful processing performance, reliable security performance, and WiFi Bluetooth function. It is an ideal solution for IoT applications.
  • Support OV2640 and OV7670 cameras, built-in flash. Support TF card, max capacity is 4G.
  • Applications : ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications..
  • How to email us? Please click ¡°Stemedu¡±(you can find "Sold by Stemedu" under Buy Now button), in the new page, click ¡°Ask a question¡± to email us.
Check Stock

10 Port USB 3.1 Gen I Hub 5Gbps - 19 Inch 1U Rack Mount

  • Industrial USB 3.1 Gen I hubs for instant USB expansion.
  • Rugged 1U 19″ Rack Mountable enclosure.
  • 10x Downstream 5Gbps USB3.1 Gen 1 ports for data transfer.
  • 1U server cabinet mounting design, best for Server, IOT applications, Industrial Control and USB storage device data replication.
Check Stock