Reviews Industrial Fans Cooling System

Outdoor Misting Fan System - 18 Inch Fans with 1500 PSI Misting Pump - With Patented Center Hub- For residential, restaurant, Industrial and Commercial Application (5 Fans)

  • Misting Fan System with 4 18 Inch Outdoor Rated Misting Fans, 1500 PSI High Pressure Misting Pump, Patented Center Mist Fan Hub and KBN Nozzles. The Misting Pump can support up to 8 Fans, applications include Residential Patio Misting, Outdoor Restaurant Misting, Industrial Cooling, Warehouse Misting..
  • 18 Inch Fan Features Durable corrossion resistant finish Stainless Steel Hardware 3 Speed pull chain Industrial Grade Aluminum Blades Sealed Outdoor Rated Industrial Motor with Thermal Overlaod protection 9 ft Pre-wired heavy duty cord Quiet operation For Indoor / Outdoor use OSHA approved grill Available in White / Black Color.
  • Fan Specifications : Size : 18" HP : 1/7 PH : 1 Volts : 120V /60 Hz RPM : 1570 CFM : 6300 Speed: 3.
  • 1500 PSI Misting Pump Features : Max 1500psi output Best In the Industry Quiet operation Direct Drive tri-plex piston pump Adjustable flow rate Can take Inlet water from external tank Includes 5 Micron commercial water filter Fan Cooled Motor with "H" class (high temperature) rating Built in no water cut-off switch Built in solenoid Built in pressure bypass Built in thermal safety switch Pressure gauge Outdoor enclosure High amp ON/OFF Switch.
Check Stock

Antrader 4020 40x40x20mm 12V DC Brushless Radial Cooling Turbo Blower Fan for DIY 3D Printer Extruder Humidifier 3-Pack

  • 40 x 40 x 20mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • High quality mini brushless 4020 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A.
  • Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

Plasma & LCD TV Vertical-Mount Cooling Fan System, with USB-Control & multispeed Fans

  • This cooling unit is designed to quietly pull hot air out of your TV or video monitor. It has 2 high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings. Each fan has a mounting plate, with a rubber air-chamber ring around the bottom edge, to make sure the fan is sealed against the back of the TV. The fans are also fitted with snap-lock adhesive pads, which stick the fans to the back of your TV, yet allow easy removal and reinstallation..
  • The system includes a USB control module, which turns the fans on and off, under the control of your TV’s USB port (type A connector). The USB module controls the power from the multi-voltage transformer (included with the cooling system), which runs the fans. In addition, YOU control the fan speed, using the multi-speed fan controller..
  • IMPORTANT: Please make sure that your TV’s USB port turns on (powers up) ONLY when the TV is turned on. That way, the fans will run when the TV is on and turn off when the TV is off..
  • Recommended fan speeds for this system: The fans (running together at 2/3 speed) are rated at 19db while moving 98 cubic feet of air per minute, or 22db & 110CFM at 3/4 speed. With cabinet cooling, slow (and quiet) are the way to go! Other available speeds....
Check Stock

Fractal Design Define R6 USB-C - Mid Tower Computer Case - ATX - Optimized for High Airflow and Silent Computing with Moduvent Technology - PSU Shroud - Modular - Water-Cooling Ready - Blackout

  • Timeless elegant Scandinavian design: including a reversible front door with anodized aluminum cover and dual-handed mounting system for elegant adaptability.
  • Optimized for Silence: high-density industrial dampening on side, top and front panels.
  • third generation ModuVent technology gives users the choice between a soundproof steel cover or filtered multi-fan ventilation setup in the top panel.
  • Type-c connector: USB 3.1 Gen 2 Type-C with fast charging Support and up to 10Gbps transfer speeds.
  • Water-cooling ready: room for up to a 420 mm radiator in the top, 360 mm in the front, and 280 mm in the base.
  • Great cooling support: 3x Fractal Design dynamic x2 gp-14 140 mm fans pre-installed for optimized airflow via two intake fans and a single Exhaust.
  • nine fan positions with intuitive layout and clear airflow paths.
  • Nexus+ smart hub for superior fan control.
  • Modular design and great storage options: storage plate lets users easily convert between the standard layout for maximum storage capacity or the new open layout for superior water cooling support and clear air flow paths.
Check Stock

SoundOriginal NF- 4020 Brushless DC Cooling Fan 12V 0.04~0.06A 40x40x20mm Speed 5500 RPM Fans for Computer Case Network and Storage Equipment (Routers, Switches, NAS etc Replacement) (12V 1pack)

  • Computer fans 40mm Brushless cooling fan 12vdc 0.04~0.06A 40mm x 40mm x20mm Speed 6000 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 5000 RPM, Dual-ball bearings have a lifespan of 60,000 hours and allows the fans to be laid flat or stand upright. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Connector: 2 Terminal Connector with 2pin-ph2.5.
  • compact motor design, the NF-A4x20’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x20’s superior airflow and pressure performance..
  • 40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
  • Dimensions: 40x40x20mm (1.6 x 1.6 x 0.79inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

Throat Full Of Glass Vocal Mix By Computer Club

  • A slatted front panel design allows ample airflow into your system for more efficient cooling.
  • Clean and modern styling, with an angled ventilation pattern and a transparent tempered glass Side panel that provides a window into your system.
  • Includes 3 120mm cooling fans for powerful airflow out of the box.
  • Room to install up to 6x 120mm cooling fans or multiple radiators in sizes up to 360mm.
  • Drive trays accommodate up to 2 3.5 inches HDDs and 2 2.5 inches SSDs, with 2 additional 2.5 inches mounts.
Check Stock

Alphacool Eiswolf 2 AIO GPU Cooler RTX 3080/3090 ROG Strix with GPU Backplate, 360mm Radiator, Digital RGB

  • 1.77” full-color OLED panel for real-time system stats and personalized logos or animations via Asus livedash software controls. Air flow - 122 CFM. Noise level - 29.7 decibels.
  • Industrial-grade 2000 RPM PWM noctua radiator fans and software control via FanXpert reduces unnecessary noise while keeping your system.
  • Patent pending embedded Micro fan inside the pump housing to maximize cooling performance on the VRM and M.2.
  • Aura Sync addressable RGB lighting features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of AURA Sync enabled products.
  • Aluminum pump cover and reinforced, sleeved tubing ensure high durability.
Check Stock

SoundOriginal Brushless DC Cooling Fan 24V 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (Black 24Vx1)

  • 1pcs Brushless cooling fan 24vdc 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 6800 RPM, Air Flow : 6.9 CFM.
  • Connector: 2 Terminal Connector with 2pin-ph2.54.
  • compact motor design, the NF-A4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10’s superior airflow and pressure performance..
  • DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.06A.
  • Dimensions: 40x40x10mm (1.6 x 1.6 x 0.36inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

Corsair 275R Airflow Tempered Glass Mid-Tower Gaming Case Black

  • A slatted front panel design allows ample airflow into your system for more efficient cooling.
  • Clean and modern styling, with an angled ventilation pattern and a transparent tempered glass Side panel that provides a window into your system.
  • Includes 3 120mm cooling fans for powerful airflow out of the box.
  • Room to install up to 6x 120mm cooling fans or multiple radiators in sizes up to 360mm.
  • Drive trays accommodate up to 2 3.5 inches HDDs and 2 2.5 inches SSDs, with 2 additional 2.5 inches mounts.
Check Stock

The Best Of Fourplay (2020 Remastered) (SACD)

  • YUANHOT Advantage: Upgraded fan cooling system enhance airflow & increase heat dissipation, also work as a top cooling fan.
  • 2 USB Port for charging or data transmission.
  • Dual Purposes: 1. Placed on the bottom as a vertical cooling stand to enhance airflow.
  • 2. Mounted the fan on the top of your console and the stand on the bottom to increase heat dissipation (Please Note: installation direction as shown in images).
  • Upgraded Cooling Fans: Built-in 2 high-speed fans with new design. No need to worry about your series s overheating. With ON/OFF fan button, keeps it working functionality and improves the operational life span.
  • 2 Extra USB Ports: Equipped with one USB power port for charging only.
  • the other for charge and data transfer. Won’t block any of the ports.
  • What You Get: 1pk x Cooling fan (installed on top or bottom), 1 pair x Series S stand, 1 x User Manual ( Note: The console, games, or controllers are NOT included).
Check Stock