Reviews Industrial Barkes Controller

EEEKit 20A Solar Charge Controller, 12V/24V Solar Panel Battery Intelligent Regulator with Dual USB Port PWM Auto Parameter Timer Setting Adjustable LCD Display, Blue

  • 20A SOLAR CHARGE CONTROLLER: 20A Solar panel battery intelligent regulator are UL 1741 certified, the solar charger controller compatibility with 12V 24V system. Discharge current: 10A, build-in industrial microcontroller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone charging..
  • SIX PROTECTION FUNCTIONS: 20A solar controller has Short-circuit protection, Overload protection, Over Current Protection, Overcharge protection, Under-voltage protection, Over-voltage protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery..
  • BATTERY TYPE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. In order to protect the lifespan of the battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
  • FUNCTIONAL LCD DISPLAY: Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc..
  • EASY TO USE: The charge controller should connect the battery first, then the solar panel, finall....
Check Stock

Reverse Display (Drone)

  • Smart controller features a built-in 5.5" 1080p ultrabright display.At 1000 cd/m², the display is approximately twice as bright as conventional smart device screens..
  • Smart remote controller supports automatic switching between 2.4GHz and 5.8GHz, long-range transmission at distances of up to 8km..
  • Touchscreen smart controllers the 5000 mAh battery supports quick charging and can work continuously for up to 2.5 hours..
  • 4K HD video capture resolution, with Mavic 2 or other aircraft equipped with OcuSync 2.0, enhance the outdoor flying experience..
  • Compatible Drone Model: for DJI MAVIC 2 Industrial Edition Series, MAVIC AIR 2, Air 2S ,Mini 2,Phantom 4 Pro V2.0.5. (Note: when using with MAVIC 2 Industrial Edition Drone, you need to use for DJI Pilot.).
Check Stock

AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Compatible with Arduino Mega Pololu Shield for Reprap 3D Printer Kit Accessory

  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel.
  • 2004 LCD smart controller for 3D printer，Supports for RAMPS 1.4 control board.
  • This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer.
  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.
Check Stock

Texas Instruments SN74HC04N CD74HC04 74HC04 Hex Inverters DIP14 10 Pack

  • ✊【Easy to Use】Our products is a high-quality PLC Programmable Controller, and built to strict quality control standards, as a artistic appearance and simple structure, it all 10 ports use photoelectric isolation to transmit signals, which can effectively filter out various interferences, the input supports positive/negative triggers, very friendly to novices..
  • ✊【Good Performance】Our products has Using 32‑bit industrial processors, small PLCs suitable for industrial automation applications. Besides, it has high‑speed counter function, comes with analog input and output channels, supports 2 channels of 100K high‑speed pulse output..
  • ✊【Strong Applicability】ThisPLC Programmable Controller has Compatible with most commands of FX3U, support for GXworks2/GxDeveloper programming, with independent programming port, which can help you in many areas..
  • ✊【Wide Application】Our power circuit adopts anti‑reverse and anti‑surge design, which is widely used in the signal acquisition and control of industrial field equipment..
  • ✊【Use it with Confidence】You can use our product with confidence, this lathe keeps guaranteed quality after many inspections before leaving the factory..
Check Stock

TIME Mark 258B 3-Phase Monitor 258B240VAC

  • MAIN FUNCTION: Used for industrial-grade 32-bit MCU with strong anti-interference and faster speed..
  • PRACTICALITY: High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off..
  • MULTIPLE USES: Widely used in all kinds of industrial automatic control, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, carpentry, central air conditioning, environmental protection equipment and industrial single process control equipment in industrial assembly line, various kinds of machine tools..
  • EASY TO USE: Programmable logic controller is reusable, stable, easy to learn. The PLC transmission baud rate is 9600..
  • SIZE: Approx. 86 x 73 x 20mm / 3.4 x 2.9 x 0.7inch.
Check Stock

YWBL-WH PLC Control Board Programmable Logic Controller 8 Input 6 Output Programmable Logic Controller (FX3U-14MR)

  • STRONG ANTI-INTERFERENCE AND FASTER SPEED:This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed..
  • HIGH QUALITY: chip, stable performance, on-line download, on-line monitoring, automatic save when power off.
  • SUPPORT:Program is written in ladder logic programming language, supports for GX-Developer, GX-work2, supports HMI connection.
  • HMI COMMUNICATION:Programming port is the port for program upload, download and HMI communication.
Check Stock

FX1N-14MR Industrial Control Board PLC,DC24V,Programmable Logic Controller Relay Output,Supports for GX-Developer, GX-work2,HMI Connection.

  • FX1N-14MR: Programmable controller with industrial-grade 32-bit MCU, strong anti-interference capability, faster speed, high-quality chip, stable performance, 8 inputs and 6 outputs, online monitoring, online download storage, automatic failure after power on..
  • MR RELAY TYPE: does not support pulse, can be connected to 24V DC load, maximum output current 5A..
  • PLC CONTROLLER: programming port is the port for program upload, download and hmi communication. The program is written in ladder logic programming language, and supports gx-developer, gx-work2 and hmi connection..
  • WIDE RANGE OF APPLICATIONS: It can be flexibly applied to various industrial automation control occasions such as printing, chemical, building materials, packaging, textile, metallurgy, etc..
  • INDUSTRIAL CONTROL BOARD: no analog output, no pulse output, no support for floating point, no support for stepper motor. Support the connection of text screen and touch screen. The baud rate of plc is 9600..
Check Stock

WERCHTAY 30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Intelligent Regulator with 5V Dual USB Port Display Adjustable Parameter LCD Display and Timer Setting ON/Off Hours

  • 30A SOLAR CHARGE CONTRALLER: WERCHTAY Solar Charge controller compatibility with 12V and 24V system, Discharge Current: 30A.
  • dual USB output 5V / 2.5A, Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL..
  • FUNCTIONAL LCD SCREEN: Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc..
  • 3-STAGE PWM CONTROL CHARGING: Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery..
  • MULTIPLE INTELLIGENT PROTECTION: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices..
Check Stock

Internal Mini SAS SFF-8087 to Mini SAS SFF-8087 Mini SAS Cable, 1.8 FT / 56 cm

  • Mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces.
  • Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
  • Ideal component of a professional SAN network.
  • Robust design of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connection.
  • SFF-8087 host compatible with popular controller HBA cards such as 3Ware 9650SE-8LPML SATA2 Hardware RAID controller Kit, Adaptec ASR-5805/512MB SAS RAID controller, Adaptec 2258200-R 5405 RAID, Adaptec 2258500-R 51645 RAID, Adaptec RAID 6405E Storage Controller, Dell 512MB PERC H700 RAID controller, Dell Perc H200 Integrated Sas Pci-e 2.0 RAID controller, Dell PowerEdge 8-port 6GB/s PCIe x8 SAS SATA RAID controller PERC H310.
Check Stock

EpRec MPPT 100A 12V/24V Auto Focus Tracking Solar Panel Charge Controller Regulator with Dual USB Port,LCD Display, New Mppt Technical

  • 【High Quality Solar Charge Controller】 Our Solar Controller Mppt technology is to detect the maximum charging current,not the boost type or the automatic charging of the solar panel voltage. Compared with normal solar charge controller, this controller could increase efficiency by 10%-30%..
  • 【Multi-function LCD Displays】This controller is 12V/24V automatically adapt,first connect the battery,then connect the solar panels,when you first use it, make sure the battery has enough voltage,so that the controller can recognize the correct battery type..
  • 【Industrial-grade Master Chip】16AD sampling accuracy, temperature Charging current, discharge current accurate real-time display, power generation at a glance..
  • 【Professional After-sale Service】We have the most professional technicians to answer your questions at any time, you don't have to worry about encountering problems that you can't solve, we are always at your service..
  • 【NOTE】This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving. Notcie: not true MPPT ,there is no large transformer coil inside.
Check Stock