Reviews Inch Subwoofer Grill

Acoustic Audio PSW500-12 Home Theater Powered 12\ LFE Subwoofer Black Front Firing Sub,500 Watts

  • HOME THEATER LFE POWERED SUBWOOFER - Dedicated LFE or standard RCA inputs easily connect to your home theater receivers Subwoofer Output. Save power with the added Signal Sensing Auto ON/OFF feature.
  • 500 WATTS PEAK POWER - Integrated high efficiency power amplifier, 24 - 250 Hz with 98dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control switches, Gain and 40 - 140 Hz Crossover control knobs.
  • 12 INCH FRONT FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet with vibration absorbing feet, high quality MDF with internal bracing, black ash finish and removable acoustically transparent grill.
  • SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with RCA dedicated or LFE subwoofer outputs, home receiver or stereo with raw wire outputs. Use for home theater and surround sound systems.
  • WHAT'S IN THE BOX - Acoustic Audio by PSW500-12 powered subwoofer, 9 foot dual RCA/LFE cable, RCA "Y" adapter, instruction manual - Standing sub with feet size is (H x W x D) 17" × 14.75" × 13.5".
Check Stock

Acoustic Audio PSW400-10 Home Theater Powered 10\ LFE Subwoofer Black Front Firing Sub,400 Watts

  • HOME THEATER LFE POWERED SUBWOOFER - Dedicated LFE or standard RCA inputs easily connect to your home theater receivers Subwoofer Output. Save power with the added Signal Sensing Auto ON/OFF feature.
  • 400 WATTS PEAK POWER - Integrated high efficiency power amplifier, 25 - 250 Hz with 97dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control switches, Gain and 40 - 140 Hz Crossover control knobs.
  • 10 INCH FRONT FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet with vibration absorbing feet, high quality MDF with internal bracing, black ash finish and removable acoustically transparent grill.
  • SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with RCA dedicated or LFE subwoofer outputs, home receiver or stereo with raw wire outputs. Use for home theater and surround sound systems.
  • WHAT'S IN THE BOX - Acoustic Audio by PSW400-10 powered subwoofer, 9 foot dual RCA/LFE cable, RCA "Y" adapter, instruction manual - Standing sub with feet size is (H x W x D) 15" × 12.25" × 11.25".
Check Stock

Acoustic Audio PSW300-8 Home Theater Powered 8" LFE Subwoofer Black Front Firing Sub,300 Watts

  • HOME THEATER LFE POWERED SUBWOOFER - Dedicated LFE or standard RCA inputs easily connect to your home theater receivers Subwoofer Output. Save power with the added Signal Sensing Auto ON/OFF feature.
  • 300 WATTS PEAK POWER - Integrated high efficiency power amplifier, 26 - 250 Hz with 97dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control switches, Gain and 40 - 140 Hz Crossover control knobs.
  • 8 INCH FRONT FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet with vibration absorbing feet, high quality MDF with internal bracing, black ash finish and removable acoustically transparent grill.
  • SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with RCA dedicated or LFE subwoofer outputs, home receiver or stereo with raw wire outputs. Use for home theater and surround sound systems.
  • WHAT'S IN THE BOX - Acoustic Audio by PSW300-8 powered subwoofer, 9 foot dual RCA/LFE cable, RCA "Y" adapter, instruction manual - Standing sub with feet size is (H x W x D) 13" × 10" × 9.5".
Check Stock

BLAZOR 12 inch Speaker Grill Blck Subwoofer Metal Steel Mesh Speaker Cover Waffle Protector Guard Decorative Car Audio Grille with 4 pcs Grills Clamps and Screws 12 inch

  • 【Perfectly Protect Your Subwoofer】Guffo speaker grill have high elastic ABS outer ring with reinforced steel grille, protect your subwoofer from cuts, tears, tears and dents..
  • 【Steel Speaker Cover】The 12" speaker cover is made of heavy duty deburred steel and fits most 12" woofers, protecting your precious speakers..
  • 【Easy to Install】Cold rolled steel subwoofer grills with 4 ABS plastic clips and 4 steel wood screws to make your mounting more convenient..
  • 【Fashionable Design】With a classic "honeycomb" design, powder-coated satin black finish is beautiful and generous..
  • 【Wide Applicable】Suitable for most 10-inch speakers, and can also be used as a decorative ring for DIY speaker cabinets, home speakers or car speakers..
Check Stock

Subwoofer Speaker Adapter Spacer Rings - Fits 2006-2012 Rav4 with or Without JBL - for Kicker 8 Comp RT Subwoofer

  • For OEM Appearance Non JBL Rav4's will need to purchase Grill Part #6403342010B0 to be mounted in rear gate panel. Otherwise, A universal grill can be....
  • 1/4" thick adapters assure no clearance problems with Kicker Comp RT Subwoofer.
  • Utilizes existing vehicle mounting points, and requires no cutting or drilling.
  • manufactured with 7 1/8" round cutout to fit 8" Kicker Comp RT subwoofer.
Check Stock

Monoprice 602520 Microphone Stand with Boom

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

10 inch Speaker Grill-Subwoofer Grille -Steel Speaker Covers Waffle Speaker Woofer Grill Black with 4pcs Grill Clamps and 4pcs Screws 10 inch

  • 1 Subwoofer Grille Heavy Duty De-burred fits Most 10" Woofers. Classic "Beehive" Design..
  • Butyl rubber grill surround, overall measurement of 10.125" round and .5" high, comes with 4 ABS plastic clamps and 4 steel wood screws..
  • High Flex Weatherproof ABS Outer Rim with Reinforced Steel Grill, protect your subwoofer from cuts, rips, tears and dents..
  • Distribute screws,make you more convenient installation..
  • Use for speaker cabinet, home speaker or car speaker..
Check Stock

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Precision Port 2' Flared Speaker Cabinet Port Tube Kit

  • 250 WATT POWER: The high powered audio projection carpeted subwoofer tube enclosure has a max power output of 250W so you can play your favorite tracks as loud as you want w/ style. Equipped w/ built-in high output amplifier & RCA/speaker line input.
  • RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill.
  • 1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
  • 35Hz - 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle's sound system.
  • One 8'' High Power 4 Ohm Subwoofer - 1.5'' Alu....
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock