Reviews Inch Straight Router Bit

WORKPRO 15-Piece Router Bits Set, 1/4-Inch Shank Tungsten Carbide Router Bits for Woodworking, Solid Woods, Hard Woods, Chipboard, MDF, DIY, and Carpenter

  • 【VERSATILE ROUTER TOOL SET】The set includes 1/4 inch router bits set, that is dovetail bit, mortising bit, panel pilot bit, cove bit, 4* straight bit (1/8'', 1/2'', 1/4'', 5/8''), roman ogee, 2* cove box bit (R1/4'', R1/8''), 45-degree chamfer, flush trim, confer round, 90-degree "V" grooving bit and storage case.
  • 【SHARP&DURABLE】Carbide router tips head, precisely machined, sharp, and heat-resistant, last 80-90 percent longer than HSS bits. With two cutting edges, the router bits set surpass single-edge bits in making smooth cuts. The inclined angle facilitates the removal of wood chips.
  • 【SAFE FOR USE】These bits with plenty of metal behind each cutting edge.
  • Anti-kickback design prevents kickback caused by fast feeding and deep bites. What's more, the 1/4 inch shank bits provide greater stability and less vibration during operation.
  • 【EASY TO STORE&CARRY】Storage case with identification for easy access and organization. The case also helps protect the router bits while on the travel or during working time.
  • 【WIDELY APPLICATION】Effective for edging, trimming, veining, and grooving all types of wood.
  • perfect for door panels, picture frames, plywood, and other carpeting projects. Suitable for the hobbyist and for light work.
Check Stock

Reversible Finger Glue Joint Router Bit 1/2 Inch Shank, Newdeli Bearing Finger Joint Router Bits Carbide Joinery Wood Milling Cutter for DIY Door Table Cabinet Shelve Furniture

  • ...blades provides increased strength and utmost resistance. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning..
  • [Multi-purpose Use] The 1/2 router bit is designed for making wooden doors, wooden frame, cabinet box mortise, ideal for creating strong finger joints for straight or 90 degree corners for small boxes and crates. The router bit is suitable for all range's router such as handheld router and table router. You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily..
  • [For Cutting Various Materials] Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Please avoid cutting ferrous metal and non wood materials,such as:steel,iron,sand,etc. The router bit is packed in a plastic box for easy storage and carry..
  • [Use Of Safe]:At least 1.26 inch shank must be inserted and tightened securely so we can use the clamping force..
Check Stock

BOSCH PR20EVS Router Tool, Colt 1-Horsepower 5.6 Amp Electronic Variable-Speed Palm Router

  • PR20EVS Colt Palm Router features a 1.0 Horse Power 5.6 amp variable speed motor with speeds from 16,000 to 35,000 RPM.
  • CONVENIENT: Provides a straight edge guide to lead router along edges of work piece or up to 3-5/8 inch from edge.
  • The wood router also features an angled cord exit to keep the cord out of the way when working.
  • DURABLE: The rugged aluminum fixed base of the wood router is durable, solid and precise.
  • The PR20EVS features unique finger support pockets for additional stability, especially when trimming edges.
  • PRECISION: The fast and precise depth adjustment system allows both macro and micro adjustment while the quick clamp system allows motor to be easily adjusted or moved from base to base.
  • VERSATILE: The PR20EVS provides enhanced bit capacity with a fixed base that accepts bits up to 1 5/16 inch in diameter.
  • Versatile bit changing system allows for fast, easy bit changes using two wrenches or spindle lock and one wrench.
Check Stock

BOSCH PR20EVS Router Tool, Colt 1-Horsepower 5.6 Amp Electronic Variable-Speed Palm Router

  • PR20EVS Colt Palm Router features a 1.0 Horse Power 5.6 amp variable speed motor with speeds from 16,000 to 35,000 RPM.
  • CONVENIENT: Provides a straight edge guide to lead router along edges of work piece or up to 3-5/8 inch from edge.
  • The wood router also features an angled cord exit to keep the cord out of the way when working.
  • DURABLE: The rugged aluminum fixed base of the wood router is durable, solid and precise.
  • The PR20EVS features unique finger support pockets for additional stability, especially when trimming edges.
  • PRECISION: The fast and precise depth adjustment system allows both macro and micro adjustment while the quick clamp system allows motor to be easily adjusted or moved from base to base.
  • VERSATILE: The PR20EVS provides enhanced bit capacity with a fixed base that accepts bits up to 1 5/16 inch in diameter.
  • Versatile bit changing system allows for fast, easy bit changes using two wrenches or spindle lock and one wrench.
Check Stock

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

  • Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock