Reviews Inch Micrometer
Fowler 52-229-214-0 Economy Outside Micrometer Set with 0–4 Range (Set of 4)
- Micrometer Set: With flat anvil/spindle for general purpose measuring.
- microfine graduations and carbide-tipped measuring faces.
- High Accuracy Micrometer Set: Anvils and spindles are hardened and precision ground with microlap finish on tips.
- 0.256" diameter, 0.00003" flatness, and 0.00005" parallelism on 0 to 1" micrometer for accurate measurements.
- Easy to Use: Quick, easy zero adjustment on the sleeve and positive locking nut on spindle.
- Ratchet stop thimble applies constant measuring force for repeatability between users.
- Satin Chrome Finish: On the thimble and sleeve to help reduce rust and glare, lapped spindle thread that provides smooth movement and extends product life.
- Set Includes: Outside micrometers of 0 to 1 inch, 1 to 2 inches, 2 to 3 inches and 3 to 4 inches.
- 1 inch, 2 inches, and 3 inches standard, a wrench, and a fitted case.
Check StockKlein Tools 57060 Master Electricians Torque Wrench Set with 2 Adjustable Torque Screwdrivers, Micro-Adjustable for Accuracy, 25-Piece
- One 7/16-Inch internal hex drive micrometer-adjustable torque wrench. Torque range: 200-1200 inch-pound (22.6-135.6 Nm) with 10 inch-pound incremements (1.1 Nm).
- One 7/16-Inch internal hex drive micrometer-adjustable torque wrench. Torque range: 40-200 inch-pound (4.5-22.6 Nm) in 2 inch-pound (0.2 Nm) increments.
- Ten 7/16-Inch wrench bits. Sizes: 1/8-Inch, 5/32-Inch, 3/16-Inch, 7/32-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch, 9/16-Inch, hex to square.
- Two 7/16-Inch hex-wrench extensions. Sizes: 4-Inch (102 mm).
- 7-Inch (178 mm) and one 7/16-Inch female hex-wrench adapter (coupler) that couples wrench bit to extension.
- One 1/4-Inch (6 mm) adapter for screwdrivers.
- Adjustable torque screwdriver. Torque range: 2-36 Inch-pound (0.2-4 Nm) in 2 Inch-pound (0.2 Nm increments). Accepts 1/4-Inch bits.
Check Stock7 PC Micrometer Tip Anvil Attachment Set Precision Ground
- All anvils other than ball subtract .500".
- Being held with own reinforced neoprene boots.
- Fits any 1" to 12" micrometer anvil inch or metric.
- Case dimension: 2-3/4''L x 4-1/2''W x 1''H.
Check StockLuckyHigh Precision Micrometer Holder Stand Cast Iron Base Rubber Lined Jaws Inspection Fixture
- Micrometer holder base is made of cast iron. The clamp is equipped with rubber pad to avoid damaging the instrument and protect instrument in the process of clamping..
- Rubber lines jaws are 1.5" wide, will open to 0.75" (18mm)..
- Micrometer Holder Stand fit for most inside and outside micrometers..
- Micrometer Holder Stand Jaws can rotate 50 degrees forward and 30 degrees back..
- Micrometer Holder Stand is mainly used for clamping 0-4" micrometer to provide high measurement stability..
Check Stock50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring
- STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
- HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
- VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
- CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
- MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..
Check StockMetric Micrometer
- 【Outside Micrometer Set】0.0001" precision micrometers are available in a variety of sizes:0-1", 1"-2", 2"-3", 3"-4", with 3pcs benchmark rods and....
- 【Thickened Carbide Head】 The outer micrometer is made of tungsten steel and hard alloy, and surface powder coated baked finish, which is more....
- 【Ratchet-stop Thimble Design】The ratchet-stop thimble on the micrometer tools spindle provides constant force, prevent screwing too tight, make....
- 【Multi-purpose】Metric Micrometer are widely used for precise measurement of length, diameter or thickness..
- 【Strong Warranty】 Ruitool are confident with the quality of our Outside Micrometers Set that we offer a one year manufacturer warranty when....
Check StockFowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range
- Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
- Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
- carbide-tipped anvil and spindle have 0.256" measuring....
- Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
- Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
- Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.
Check StockVEVOR Micrometer Set 0-6' Machinist Tool Micrometer Set 0.0001' Accuracy 6 Pcs Precision Machinist Tool Set Micrometer, Laser-Etched Micrometer with Calibration Standards, Wrench
- [ 6 Pcs Micrometer Set ]: Micrometer set includes 6 micrometers with measuring range: 0-6" (0-1"/1-2"/2-3"/3-4"/4-5"/5-6"),and microfine Graduations is 0.0001",also the accuracy is 0.0001",ensure a precise measurement every time..
- [ Calibration Standards & Wrench ]: The micrometer set comes with 5 calibration standards and 1 adjustment wrench,which provides you precise adjustment solutions..
- [ Precision Machinist Tool ]: It works with high accuracy of 0.0001'', Micro-lapped carbide tipped measuring face make more accurate reading,and the laser-etched graduations will never fade..
- [ Durable Material Micrometer ]: The outside micrometers are made of heat and corrosion resistant cemented carbide and cast Iron, which makes it work perfect in different condition. Satin chrome finish on thimble and sleeve is rustproof and reducing glare..
- [ Wide Application for Your Needs ]: This outside micrometer set is ideal for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools etc,help you measure the outside dimensions of raw materials, whole workpieces and more of metalworking and other industrial measure needs..
Check StockPush Button Safety with Pin and Spring, Steel Construction (Stainless-)
- All the features of the Bench Rest Seater Die plus a Micrometer for adjusting bullet seating depth.
- Micrometer allows fine-tuning in either direction.
- Gradations at increments of .001″ are clearly marked.
- Eliminates much of the trial and error that was once associated with seating accurate rounds.
- Bright, white markings make micrometer easy to read.
Check StockKynup Digital Caliper 8 Inch Caliper Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 200mm
- 【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the....
- 【Precise & Accurate】 Kynup 8" caliper has a measurement range of 0 - 8''/ 0 - 200mm.
- accuracy to ±0.001”/0.02mm and resolution to....
- 【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal....
- 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which....
- 【Wide Application & Auto Off】The 8 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists,....
Check Stock