Reviews Inch Hole Saw

Aracombie 4PCS 1-1/4 Inch to 2-1/8 Inch Hole Saw Kit for Wood, 1.2 Inch Cutting Depth Hole Cutter Drill Bit with Mandrel, Round Hole Saw Set for Cornhole Boards Plastic Drywall Soft Metal (Black)

  • Package Contains: 4 x Wood Hole Saw Kit, 4 Different Cut Size: 1-1/4 inch/32mm, 1-1/2 inch/38mm, 1-3/4 inch/44mm, 2-1/8 inch/54mm. The hole saw cutter set can be easily installed on a handheld or vertical drill, Colour: Black..
  • Wide Range of Application: Plastic hole saw has sharp teeth, which can quickly drill a smooth edge hole in wood, plastic, PVC, cornhole boards, drywall, fiberglass, thin metal and other materials. Round hole saw cannot be used to cut concrete..
  • Cost-Effective: The fiberglass hole saw cut to a depth of approximately 1 inch / 25.4mm. A set contains 4 pack circle hole saw cutter, which is very suitable for woodworking, decorators, DIY enthusiasts, and craftsmen to buy and use..
  • Material: Drywall hole saw kit is made of high quality carbon steel, which is wear-resistant and durable. This fiberboard hole saw surface is painted and the side chip hole is designed to further extend the service life..
  • After-Sales Guarantee: Aracombie has a 24-hour human customer service. If you have any questions before purchasing or are not 100% satisfied with the product, please fe....
Check Stock

10 PCS 2 inch Desk Wire Cord Cable Grommets Hole Cover with Hole Saw Kit High Speed Bi-Metal Holesaw Drill Bits for Office PC Desk Cable Cord Organizer

  • Hole Saw Set: Package includes 10 pcs Desk Wire Cord Cable Grommets, 1pcs 2 inch M42 Bi-Metal hole saw, 1pcs 7/16 inch hex drilling shaft, 3pcs drill bit, and 1pcs M4 Hex wrench..
  • Hole Saw Drill Bit: The hole saw drill bit is made of M42 high-speed steel saw blade for better performance in durability and toughness, the cutter head is pointed and can open holes efficiently..
  • Desk Cable Grommets: Made of quality plastic, good comprehensive performance, wear-resistant, corrosion-resistant, durable to use. Removable cover, with an opening hole sleeve, which can open the hole and clip-on top cover, so if you have a lot of cords, you can use the desk grommet without cover..
  • Easy to Install: Just assemble the hole saw with the included hex wrench and drill the hole where needed, punching a hole first, then place the main part of the grommet directly into the hole, the overall size of grommets measures 2.5 x 0.77 inch (Dia. x H), fitted with the mounting hole diameter is 50 mm/ 2 inch..
  • Wide Application: Desk cord grommet can effective cable and wire management, neatly organize the wires from computer desks, PC peripheral, office equipment, entertainment systems in home, office and school..
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock

Acekit 2 1/4 inch Hole Saw With 3/8 Arbor HSS Bi-Metal Hole Saw Blade And Variable Teeth Pitch For Wood,Plastic Board,Pipe,Plywood,And Soft Metal Sheet (57mm)

  • 【HIGH PERFORMANCE】the hole saw made of M42 high speed steel and bi-metal ,dual slots for quick remove the chipped material,heavy duty and durable with large and sharp variable teeth pitch for fast and precisely cutting.
  • 【DIMENSIONS】diameter of the hole saw about 57mm for 2 1/4 inch hole cutting, depth of the hole saw about 1 inch (25mm).
  • 【QUICK CHANGE ARBOR】size of the screw in arbor is 3/8 inch for quick change mandrel, fits both 3/8 and 1/2 inch drills.
  • 【BONUS】the hole saw came with a allen wrench for drill bits installation , so you need not to pay extra money for it, and 1 pack of extra drill bits for long term usage.
  • 【WIDE APPLICATION】With the hole saw, you can easily cut precise hole for wood/plywood/laminated/PVC board, plastic pipe, ceiling ,kitchen cabinet hole cutting, you can also use it to cut hole for soft metal sheet (kind remind: for metal sheet cutting constant cooling with water will be good for long-term usage and fast cutting).
Check Stock

IVY Classic 26632 2' Carbide Grit Edge Hole Saw Kit, USA, 1/Card

  • Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit.
  • Cuts ceramic tile, marble, slate and fiberglass.
  • Continuous rim of carbide grit ensures smooth cutting.
  • Carbide Grit Hole Saw Made in USA, Diameter 2-inch, Cutting Depth: 1-inch.
Check Stock

2 inch Carbide Grit Hole Saw, 1-1/2 Inch Cutting Depth for Brick, Concrete Block, Stucco

  • 【PACKAGE】This Carbide grit hole saw kit includes 4 3/8 Inch(111mm) Black SAW BLADE, 1 SDS PLUG MANDREL, 1 DRILL BIT, and 1 CARBIDE TIPPED PILOT DRILL BIT to satisfy your different needs.
  • 【UNIVERSAL APPLICATION】This Carbide grit hole saw is your ideal choice for brick, concrete block, fiber cement siding , backer board, stucco & old plaster.
  • 【EASIER TO CUT】Carbide grit hole saw cuts through a wide range of abrasive materials.
  • 【100% Satisfaction Guarantee】We are dedicated to providing every customer with satisfying products and services.If you are not satisfied with our product, we will provide a free return or refund for you.
Check Stock

4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast in Wood,Plastic Drywall Thin Metal 4.5” Hole Cutter for Drilling Holes for Lock Knobs and Vent Black

  • HIGH PERFORMANCE METIERAL: The Eliseo 4-1/2-inch hole saw made of M42 High Speed Steel and BI-Metal, with higher hardness(≥64HRC), higher toughness....
  • EFFICIENT AND SMOOTH CUTTING---High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design....
  • WIDE APPLICATION---The Hole saw cuts 4.5 inch diameter holes through wood, plywood, plastic, drywall, soft plaster, acrylic-board and thin metal.
  • QUICK CHANGE MANDREL---The hole saw comes with a heavy duty 7/16” hex shank quick change mandrel, fits all 1/2" chuck drills, ideal for your....
  • DIMENSIONS---Cutting Holes Diameter: 4-1/2” (114mm).
  • Package comes with 1PCS 4.5inch hole saw, 1PCS 7/16inch hole....
Check Stock

Heavy Duty 4 Hole Saw with Arbor, Abuff 38mm Depth Bi-Metal HSS 4 Inch Hole Saw Blade with Positive Rake Teeth for Cutting Soft Metal, Drywall, Plastic, Wood, Fiberboard

  • 4 inch hole saw (38mm depth) comes WITH ARBOR.
  • 2 EXTRA DRILL BITS and 1 EXTRA HEX WRENCH for replacement. Hole saw made of top HSS & Bi-Metal for Heavy Dusty capability improved durability with Rust-proof. Drilling with sharper Positive Rake Tooth cuts material faster than other brand..
  • The 4" hole saw fits universal Mandrel such as Lenox, Dewalt, Milwaukee and Bosch. 38mm depth of hole saw help to cut 2x material in 1 pass..
  • This 4 Hole Saw Blade is design for drilling metal sheet, drywall, plastic pipe, wood, PVC, fiberboard, grommet hole, recessed light and can light hole Drilling..
  • Increased wall thickness of hole saw improves durability and minimizes tooth loss, 2X more durable with 50% longer life than other brand hole saws..
  • Abuff hole saw and 90 days refund or replacement for no reasons. All your product problems in these 2 years warranty will be solved promptly. Just contact us whenever you have troubles or suggestions.
Check Stock

HYCHIKA 6 inch 152mm Hole Saw 1 1/2 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall Fiberboard

  • 【HIGH QUALITY MATERIAL】The 6inch hole saw is made of bi-metal with the cutting part made of high hardness carbide steel (69-81HRC), 2mm thick,....
  • 【PRECISE AND CLEAN CUTTIN】Non-binding clean edge design and duplex teeth guarantee a cleaner and smoother cutting with higher precision. The chip....
  • 【HIGH HARDNESS】Comes with a heavy duty 1/2" unique hex shank mandrel, fits 1/2" or 3/8’’ drills. Cutting depth: 40mm. Our hole saw features a....
  • 【WIDE APPLICATIONS】Ideal for hole cutting on soft metal, wood, PVC board, plastic, gypsum board, perfect for home projects like corn hole board....
  • 【WHAT YOU GET】1 x HYCHIKA 6’’ Bi-Metal Hole Saw Blade, 1 x 1/2-inch Hole Saw Mandrel, 2 x Drill Bits, 1 x Hex Key, 1 x User Manual..
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock