Reviews Inboard Engines

Seachoice 18331 Adjustable Inboard Engine Flusher with Telescoping Shaft – Perfect for Hard-to-Reach Motors

  • Designed to flush sand, silt, and alkali from your inboard engine.
  • Easily installs on raw water strainer for inboard engines without tools.
  • Telescoping shaft ensures precise alignment, especially in hard-to-reach areas.
  • Large diameter suction cup eliminates fall-off or blow-by while flushing.
Check Stock

Quicksilver 10W-30 Marine Engine Oil - 1 Gallon

  • Designed for use with all 4-stroke marine outboard motors and inboard and sterndrive engines.
  • Formulated to protect marine engines against corrosion and excessive wear.
  • Offers outstanding shear strength, viscosity retention and corrosion resistance.
  • Exceeds all marine industry 4-stroke oil requirements, including FC-W and FC-W Catalyst Compatible, and marine manufacturer warranty requirements.....
Check Stock

SWELL Wakesurf Creator H3X - High Performance Wake Shaper - Rotating with Hydrodynamic Texture

  • CREATES LARGER AND LONGER WAVES - Rotating Base and HEX Pattern ensures proper angle of attack what at wakesurf speeds.
  • HEX PATTERN - Moves water across the face faster reducing turbulence (air) in the wave for more push.
  • ROTATING BASE - This in combination with the HEX Pattern create the perfect wave with the most push.
  • IT FLOATS AND HAS AMAZING SUCTION - On and off and switch sides in seconds!.
  • Works With Inboard Engines Only - Will not work on Pontoons, Inboard/Outboard (i/o), Outboard, Jetboats, or PWC.
Check Stock

Shipmate 4-Stroke Marine Engine Oil SAE 10W-30 Quart #1026-4027

  • SHIPMATE 4-Stroke Marine Engine Oil SAE 10W-30 is a high performance, Synthetic Blend, motor oil specifically formulated for use in 4-Stroke Outboard engines, with or without catalyst converters..
  • Works with Cheverolet (GM), Evinrude, Ford, Honda, Mercury, Suzuki, Volvo-Penta, Yamaha.
Check Stock

Redneck Convent Boat Motor Flusher Round Circular Cup Muff Plunger with Hose Fitting Flush Kit – Marine Inboard Engine Flushing

  • INBOARD FLUSHER: Use the Redneck Convent Boat Motor Flusher Round Circular Cup Muff Plunger with Hose Fitting Flush Kit – Marine Inboard Engine Flushing to obliterate salt and mineral build up along with other contaminants from your inboard boat engine with through hull water intakes when hooked up to a garden hose.
  • Effective way to flush engine with fresh water to prevent clogging and corrosion and allow for engine adjustments.
  • EASY INSTALLATION: Requires no tools for installation or removal and perfect for hard-to-reach areas.
  • Simply twist on to attach to your intake and connect your garden hose to the included quick connect fitting to run motor out of the water or use to winterize motor.
  • Never turn water supply to full force or damage to drive may occur.
  • FITS YOUR BOAT: Fully adjustable and compatible with inboard engines with through hull water intakes.
  • As long as your boat includes a water pick-up on the bottom of the boat, this flusher is for you.
  • Make sure the boat intake scoop is less than 5 inches (12.7cm) and you have enough clearance under your trailer.
  • NO LEAKAGE: Round (circular) cup is easy to put on and provides maximum water flow while allowing zero leakage once you start the engine.
  • Cup dimensions 5.6-inch outer diameter (OD), 4.9-inc....
Check Stock

SWELL Wakesurf Creator H3X Plus - The Best Wake Shaper - Extendable Length, Rotating with Hydrodynamic Texture

  • GUARANTEED TO CREATE LONGER AND LARGER WAVES - The 3rd Installment of the SWELL Wakesurf Creator(TM) will give you More push and larger and longer wakesurf waves.
  • HEX PATTERN and ROTATING BASE - The combination of the HEX pattern and the rotating base ensure the proper angle when attached to your boat and controls the movement of water to reduce turbulence and increase wave size and length!.
  • 9 POSITION ADJUSTABLE FACE - Extend and contract wave face to get your best wave!.
  • AMAZING SUCTION - On and off and switch sides in seconds!.
  • Works With Inboard Engines Only - Will not work on Pontoons, Inboard/Outboard (i/o), Outboard, Jetboats, or PWC.
Check Stock

Ultra1Plus SAE 25W-40 Premium 4-Stroke Synthetic Blend Marine NMMA FC-W | 2 Gallon 8 Quarts

  • Designed for use with all 4-stroke marine outboard motors and inboard and sterndrive engines.
  • Formulated to protect marine engines against corrosion and excessive wear.
  • Offers outstanding shear strength, viscosity retention and corrosion resistance.
  • Exceeds all marine industry 4-stroke oil requirements, including FC-W and FC-W Catalyst Compatible, and marine manufacturer warranty requirements.....
Check Stock

STAR BRITE EZ Store EZ Start Gas Storage Additive - 32 OZ (084332)

  • For inboard and outboard gasoline engines.
  • Protects gas and engine components during storage.
  • Prevents corrosion of fuel tank and fuel delivery system.
Check Stock

Moeller 025814 Engine Paint - Yamaha Blue Gray 12 oz Package may vary

  • For use on all outboard and inboard engines, stern drives, and lower unit applications.
Check Stock

Sierra 18-5338 Condenser

  • Fits Mercruiser V-8 engines with Mallory conventional ignitions.
  • Interchangeable with CDI E66-0010, Chris-Craft 16.69-00040, Crusader 12530, GLM 70580, Mallory 9-29101, Mercruiser Stern Drive 391-5092, 391-5093, 391-898253001, 8M6001217, FI6900040, OMC Inboard 382136, OMC Stern Drive 382136, Pleasurecraft R115001, and Volvo Penta 835308-8.
  • Each Sierra product meets or exceeds the original equipment part it replaces..
Check Stock