Reviews In Walsub Woofer - BestBuyersPro.com

Kenwood Excelon KFC-XW1200F 12 4-ohm Shallow-Mount Subwoofer with Peak Power of 1400 Watts

The Kenwood eXcelon flat subwoofer design is approximately 40% slimmer in height than a standard subwoofer. This makes them ideal for installation in....
The eXcelon flat woofer uses a carbon-glass fiber honeycomb cone which allows the woofer to be efficient and durable at the same time..
The Kenwood woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response..
The flat woofer utilizes a pair of silver-plated spring terminals on one side of the woofer for connection to your amplifier's speaker wiring. The....
The Kenwood woofer features an advanced Heat Transfer System designed specifically for its slim-design to provide proper ventilation to keep the....

Goldwood Sound TR12S single 12″ woofer sealed car enclosure, 12″ woofer hole is 11″ in diameter, built-in terminal with gold screw posts, fits most cars.
High quality MDF hardwood, enclosure volume is 1.25 cubic feet, height 13″ x length 16″ x top depth 12″ x bottom depth 15.5″, speaker mounting depth is 11.75″.
The front (where the woofer is loaded) is flat and the back is slanted, made of only the best black aviation carpet.
Ships fully assembled, simply drop in your woofer.
Use for car, truck, SUV or fixed installation speakers.

Goldwood Sound TR10F single slim 10" woofer sealed car enclosure, 10" woofer hole is 9.125" in diameter, built-in terminal with gold screw posts, fits most cars.
High quality MDF hardwood, enclosure volume is .7 cubic feet, height 15" x length 19.25" x top depth 5.75" x bottom depth 7.375", speaker mounting depth is 5.125".
The front (where the woofer is loaded) is flat and the back is slanted, made of only the best black aviation carpet.
Ships fully assembled, simply drop in your woofer.
Use for car, truck, SUV or fixed installation speakers.

SEALED SINGLE 12" WOOFER SLIM CAR BOX - Just connect your wires and drop in your woofer and you're ready to roll! The front (where you load your woofer) is slanted and the back is flat.
UNIVERSAL FIT - Measure the space in your vehicle, this box size is (H x L x D) 15.125" x 19.125" x 8.125", 12" woofer hole is 11" in diameter and mounting depth is 6.375", enclosure volume is .85 cubic feet.
BUILT TOUGH - High Quality CARB Compliant MDF wood cabinet with .75" think face, black aviation grade carpet, gold binding post, positive and negative, raw wire input connections and arrives fully assembled.
SYSTEM REQUIREMENTS - Complete car audio wired system ready for a passive enclosure and raw speaker wire to connect to your woofer.
WHAT'S IN THE BOX - 1 Empty Single 12F Slim Speaker Box. Use for car, truck, SUV or fixed installation applications.

Goldwood Sound TR8F single slim 8" woofer sealed car enclosure, 8" woofer hole is 7.125" in diameter, built-in terminal with gold screw posts, wire leads included, fits most cars.
High quality MDF hardwood, enclosure volume is .4 cubic feet, height 11.25" x length 15.25" x top depth 5" x bottom depth 7.25", speaker mounting depth is 4.75".
The front (where the woofer is loaded) is slanted and the back is flat, made of only the best black aviation carpet.
Ships fully assembled, simply drop in your woofer.
Use for car, truck, SUV or fixed installation speakers.

Focal ISS-200 8" 2-Way Component Speakers System | Component speaker system includes two 8" woofers and 2 tweeters | Power Handling: Max: 160 Watts |....
Dynamics and neutrality | Woofer: 8" (200mm) | Polyglass woofer with butyl rubber surround | Partial horn loading tweeter | Built-in crossovers |....
Compact tweeter size | 4-ohm impedance | Woofer Grilles NOT Included | Sensitivity: 91.4 dB | Frequency Response: 40Hz - 20kHz | Shallow mounting....
What's in The Box?: Two 8" Woofers | Two inverted dome tweeters (with 5" length of speaker wire attached) | 2 Surface mount tweeter housings....
2 Foam woofer gaskets | 8 Speed clips | Four 7/8" Flathead screws | Eight 1" Self-tapping screws | Owner's manual (English/ French) | Focal window....

Features: Power Handling: 300W Max | 100W RMS. Impedance: 4-Ohm, Frequency response: 40 ÷ 23kHz, Sensitivity: 93 dB, Woofer size: 6″ x 9″, Tweeter size: 1.58″, Supertweeter size: 0.8″, Woofer Voice Coil Ø: 1.2″, Tweeter voice coil Ø: 1.1″, Woofer magnet: High density flux ferrite, Tweeter magnet: Neodymium, Woofer cone: Semi Pressed Paper-Mica, Tweeter dome: PEI, and Supertweeter dome: PEI..

Power Handling: 300 Watts Peak | Power Handling: 150 Watts RMS.
Impedance: 4 Ohms | Frequency Reponse Hz: 40 | Sensitivity dB SPL: 91.
Voice coil Ø mm (in.): Woofer 36 (1.4) Tweeter 28 (1.1) | Woofer size mm (in.): 165 (6.5).
Tweeter magnet: Neodymium | Woofer cone: Pressed-pulp cone with cotton fibres.
Tweeter dome: Tetolon | Crossover type: 2 Way Passive Crossover | Crossover cut off: 3.5 kHz - 12 dB Oct.

powered polypropylene subwoofer with built-in amplifier that matches the woofer performance at 150W RMS or 450W Peak..
Slipstream port eliminates port noise and provides distortion-free bass at high output levels.
Included components: One SUBBP12AM powered Subwoofer/enclosure, owner's manual and remote control.

Package Includes: (1) Kicker 47KSS6804 6x8" 100 Watt Car Audio Component Speakers Pair KSS680. (1) Pair Kicker 47KSC6804 KSC680 6x8" 75 Watt 2-Way Car Stereo Speakers KSC68.
Experience your music as a component system with separate tweeters, or as a high-end coaxial system. The woofers removable bullet-style phase plug is replaced with a special adapter, allowing the 25 millimeter, silk-dome tweeters to rotate and tilt. You get more system design options and superior off-axis performance. They work best with 15 to 125 watts of recommended power. See below for more details. High power handling. Silk-dome tweeters for a smooth sound.
Polypropylene woofer and tough rubber surrounds. Thin-mount design easily fits behind factory grilles. Four tweeter mounting options. Articulating tweeter pod included. Smaller crossover makes mounting even easier. Grilles included. Specifications: Woofer [in, mm]: 6x8", 160 x 200mm. Tweeter [in,mm]: 1", 25mm. Dome Material: Silk. Rated Impedance [: 4. Recommended Amplifier Power [Watts RMS]: 15-100. Sensitivity [1W, 1m]: 91. Frequency Response [Hz]: 35-21k.
Woofer Mounting Hole Diameter [in, mm]: 5x7-1, 127x182. Woofer Bottom Mount Depth [in, mm]: 2-, 58. Flush Mount Tweeter Hole Diameter [in,mm]: 1-, 45. Flush Mount Tweeter....