Reviews Immersion Transducer - BestBuyersPro.com

LUCKY Fish Finder Transducer Mount Arm Kayak Bracket Transducer Mounting Arm Flexible for Boat Canoe Kayak Fishing

◆ Designed for Kayak & SUP Fishing : The transducer mount arm is an easy way to mount fish finder transducers as well as other kayak accessories. It is the best way to protect your transducer from scratching or cracking when your boat is going through bottom complex terrain of waters. The transducer mount arm helps to adjust the sank depth of wired transducer compared to mounting the transducer to the boat hull..
◆ 360° Flexible Arm : The extended length of the transducer mounting arm is 21inch. Since the arm is bendable, you could adjust the angle of the transducer mounting arm to your most favorable position. Although it is a flexible arm, it couldn’t be either easily bended by the slight force. It is a solid and hard metal stick covered by the rubber..
◆ Easy Install & Remove : The design of transducer mount base cup is adaptable for various kayaks and small boats. You could fix it by its unique suction cup on any smooth surface. So you can switch the transducer mount arm to different kayaks as you like. Meanwhile, you could also fix the transducer mount arm by three screws if there are screw holes in your kayak. You could also use double sided s....

Boat Zone’s Transducer Spray Shields virtually eliminate pesky transducer spray from your boat’s transom!.
Durable marine-grade plastic construction.
Three channels for transducer cable routing help provide a professional-looking installation.
Fits any 3. 5” x 12” transducer board (transducer board required for installation - not included).

Every detail, in every direction, now for every boat.
Use MEGA 360 Imaging without sacrificing boat control. Whether trolling or using Spot-Lock, MEGA 360 Imaging is independently mounted, so your sonar picture remains unchanged as the trolling motor turns.
Pick from two operation modes for this transducer.
MEGA 360 Imaging or Side Imaging. This allows you to view a MEGA 360 Imaging view or use this transducer as a MEGA Side Imaging sonar source by selecting the Side Imaging operation mode.
Mark waypoints directly on your MEGA 360 Imaging screen and watch them update as your boat position changes, making it easy to find and then cast to fish and structure.
What's Included: MEGA 360 Imaging transducer with attached power cable and transducer cable, 10' SOLIX transducer extension cable, 10' HELIX transducer adapter cable, 10' MEGA 360 power cable and adjustable, aluminum MEGA 360 Imaging mounting bracket with depth retaining ring for shaft.

【Compatibility】1852086 transducer adapter cable is compatible with Humminbird HELIX 7 G3 / G4 fish finder with a built-in MEGA Down Imaging transducer on your trolling motor, and adapter is not required for SOLIX models..
【High Quality Material】1852086 transducer adapter cable is made of latest and high quality materials with sturdiness and durability performance, waterproof, reliable use, for longer service life..
【Great Connection】1852086 transducer adapter cable connects your fish finder to a trolling motor equipped with Built-In MEGA Down Imaging, can be able to scan deeper and wider without sacrificing clarity..
【Easy Installation】1852086 transducer adapter cable is easy to install and adapt, improving efficiency, save you time. And Shielded cable for crystal clear MEGA Down Imaging sonar performance, you can scan clearly the images in real-time.It’s a ideal choice for you..
【100% Satisfaction Guarantee】If you have any questions about 1852086 transducer adapter cable, please contact with us. We support refund within 30-Day guarantee, 12-Month warranty for....

Includes a Panoptix LiveScope transducer with live, real-time scanning sonar that allows you to see up to 200’ in any direction.
Two modes in one transducer — LiveScope Forward and LiveScope Down — to adapt to your fishing technique.
locate schools of fish, and know exactly where to drill your next hole (when pair with your compatible ECHOMAP UHD unit).
Rugged, portable carrying case fits your ECHOMAP UHD unit plus all included parts.
Kit accessories include a swivel pole mount for the Panoptix transducer, foam float and cable grommet, 12Ah battery, charger, power cable and transducer adapter cable.

Ice transducer for use with ice Helix 5 Chirp GPS G2 or Helix 5 Chirp GPS G2 and the ice Helix 7 Chirp GPS G2 or Helix 7 Chirp GPS G2.
Not compatible with non-chirp ice productsDescriptionHumminbird xi 9 1521 Ice transducer. Ice transducer for use with Ice Helix 5 CHIRP GPS G2 or Helix 5 CHIRP GPS G2 and the Ice Helix 7 CHIRP GPS G2 or Helix 7 CHIRP GPS G2. This transducer operates at 130-250 KHz and covers 15 - 21 degrees on the bottom. Is not Compatible with non-chirp Ice products..

Includes a panoptix ps22-pattern transducer with both livevü forward and livevü down modes that Show fish swimming in real time up to 100’ horizontally around you, below the ice.
Gt10hn-if ice fishing transducer Features Garmin Chirp traditional sonar with selectable narrow beam angle (8 to 16 degrees).
Rugged, glove-friendly case fits your 7” or 9” echomap Plus unit Plus all included parts.
Kit accessories include a swivel pole mount for the panoptix transducer, foam Float and cable grommet, 12Ah battery, charger, power cable and transducer adapter cable.

This dual beam transducer replaces the one included with your echo series 500 W 4-pin transducer.
When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11614-00 is required.
When using with the echo MAP 50s/70s, transducer adapter cable part number 010-11948-00 is required.
Compatible with echo, echoMAP CHIRP 42dv,43dv,44dv,45dv,/52dv,53dv,54dv, 55dv, Striker..

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.