Reviews Idle Gears

Comp Cams 12-600-8 Thumpr 227/241 Hydraulic Roller Cam for Chevrolet Small Block, camshaft only

  • High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle..
  • 227/241 Duration at .050". 107 Degree Lobe Separation Angle.
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters and more rear gear..
Check Stock

COMP Cams 127020 Mutha' Thumpr NSR 234/254 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3-V

  • SOHC - Mutha' Thumpr NSR (NO SPRINGS REQUIRED): Very rough idle, biggest cam for stock heads. Great power above 4900 rpm. Compatible with stock valve springs, benefits from converter and gears, requires cam phaser upgrade and custom tuning..
  • 273/306 Advertised Duration, 234/254 Duration @ .050 inch, .450 inch/.450 inch Lift, 109 Lobe Separation.
  • Part #26113-24 valve springs available but not required.
  • Steel retainer part #710-24 and titanium retainer part #702-24 also available.
Check Stock

COMP Cams K12-600-4 Thumpr 227/241 Hydraulic Flat Cam K-Kit for Chevrolet Small Block

  • High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle..
  • 227/241 Duration at .050". 107 Degree Lobe Separation Angle. 0.479"/0.465" Valve Lift.
  • K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, assembly....
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters....
Check Stock

COMP Cams CL12-212-2 Magnum 224/224 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block

  • Great for street machines. Needs 2500+stall, headers and gears. Rough idle..
  • 230/230 Duration at .050". 110 Degree Lobe Separation Angle. 0.480"/0.480" Valve Lift.
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Great high RPM power - Best with aftermarket torque converters and at least 9.5:1 compression..
  • Easy on valvetrain parts - Can be used with mild ratio rocker arms and traditional performance valve springs..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

LSAILON 2H1296 Equipment Fuel Injection Idle Air Control Valve Compatible with Alfa Romeo 164/ Spider/Fiat Uno, Peugeot, Saab 900/9000, Volvo 240/244/245/740/ 760/780/ 940/ S70/ V70

  • COMPATIBILITY INFORMATION：New Idle Speed Control fit for 1991-1993 Alfa, Romeo 164, 1990-1994 Alfa Romeo Spider, 2013-2015 Fiat Uno, 2015 Peugeot 2008,2014 Peugeot 207, 2014-2015 Peugeot 208/ 208 GT, 2011-2015 Peugeot 3008, 2012-2015 Peugeot 508, 1988-97 Saab 900, 1990-1991 1994-1997 Saab 9000, 1990-93 Volvo 240, 1989 Volvo 244/245, 1989-1992 Volvo 740, 1990 Volvo 760, 1990-1991 Volvo 780, 1991-1995 Volvo 940, 1998-00 Volvo S70/ V70.
  • THE MEANING OF IAC MOTOR: Idle speed control is to control the amount of idle air. Apart from stabilizing the basic idle speed, it also simplifies the intake system.Operating accurately, simple installation..
  • IAC MOTOR PARAMETER: The idle air control motor Kit with Interchange Part Number:2H1296, AC4158, 1389618, 1389618-0, 1398618, 4503363, 7586019, 60513207, 6081337, 3450181.Before purchase this parts, Please verify the correct OEM part number..
  • PREMIUM FEATURES: The purpose of the idle speed control is to keep the engine idle speed as low as possible while ensuring the engine emission requirements and the operation is stable, so as to reduce the fuel consumption at idle speed..
  • BUYER NOTICE: Please use the compatibility chart below to double check if these will work for your car.We provide ONE YEAR WARRANTY for all our ....
Check Stock

08-0045 Idle Screw Adjuster Kit for Yamaha YFS200 Blaster YFZ350 Banshee 1987-2006

  • Fitment - 08-0045, Idle screw kit for Yamaha 1988-2006 YFS200 Blaster.
  • Fitment - 08-0045, Idle adjuster kit for Yamaha 1987-2006 YFZ350 Banshee.
  • Kit Includes - a drill bit (#6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts.
  • Please Note - Installing this kit requires drilling and tapping the carburetor body.
  • Service - We offer idle screw adjuster tool 12 month service, any questions about idle screw adjuster tool, please contact us by email, we will reply....
Check Stock

[Upgraded]Motorcycle Heated Grips Cover USB Waterproof & Dustproof Temperature Adjustable Handlebar Grip, 6 Gear Electric Heated Handlebar Cover Motorcycle Handlebar Warmer with Switch (Yellow)

  • ✨【6-gear Temperature Adjustment】Our product switch has a built-in intelligent temperature control chip, and the temperature can be adjusted in 6 gears. The intelligent temperature control is more convenient and can be adjusted to the corresponding temperature according to personal preferences. Product power value: 1 gear (red): 100%, 2 gear (orange) 90%, 3 gear (yellow): 80%, 4 gear (green): 70%, 5 gear (blue): 60%, 6 gear (white): this gear is empty, no current output and then press the cycle in turn..
  • ✨【Product Material】Our product adopts PET metal heating film + Kevlar wear-resistant cloth, which heats up faster and is more evenly heated. After 8,000 wear-resistant tests successfully, it is more durable. Using a large heating plate, the heating area is large, the heating speed is fast, and the heating speed is 10 seconds, so that your hands are no longer cold in the cold winter..
  • ✨【Product Size】Heating sheet: 12.8cm long and 10cm wide.
  • the length of the heating sheet to the switch is 104cm.
  • in the case of uninterrupted power, the switch can remember the last used gear, and when it is turned on again, it will start working from the gear before the shutdown , but if the power is turned off, it will not be remembered..
Check Stock

OCPTY 2H1094 Idle Air Control Valve FIT for Jeep for Cherokee 4.0l 1998-2001 for Jeep for Grand Cherokee 4.0l 1998-2004 for Jeep for Wrangler 4.0l 1998-2004

  • FITMENT:Idle Air Control Valve fit 1999-2002 for Dodge for Dakota 2.5l, 1999-2002 for Dodge for Dakota 3.9l, 2000-2001 for Dodge for Dakota 4.7l,....
  • ECONOMY: Good fuel economy is achieved by maintaining minimum idle speed and deceleration air volume control.Improve engine performance by increasing....
  • REFERENCE OEM PART NUMBER：Fuel Injection New Idle Air Control Valve for 2171783, 229571, 22969, 4874373, 4874373AB, 53030821, AC327, AC176, 2H1094.
  • INCREASE THE SPEED:The ECU controls the idle speed control valve to increase the air amount, thereby increasing the idle speed and protecting the....
  • ATTENTION:Please check the part number before purchasing to ensure fitment and Check for proper operation with each tune-up and replace when trouble....
Check Stock

KastKing Rover Round Baitcasting Reel, Left Handed Fishing Reel,Rover40

  • BULLET PROOF - The hot Rover reel just became hotter. The KastKing Rover round baitcasting reel has been reinforced with thicker hard anodized aluminum side plates, CNC machined spool, precision cut brass gears, all alloy flawless level wind, industry-first stainless steel worm gear, patented metal idle gear, stainless steel shaft and other components for superior durability and corrosion protection..
  • MORE POWERFUL - You will love the stronger, more powerful KastKing Rover round baitcasting reel with a superior carbon fiber drag system. With its newly designed “Cymbal Washer” System, KastKing Rover now offers up to 30LB of smooth drag..
  • SUPER SMOOTH - KastKing Rover reels have premium MaxiDur double shielded stainless steel ball bearings (6 + 1 BBs on Size 40-60, 4 + 1 BBs on 70 - 90) for smooth operation..
  • VERSATILE - KastKing Rover is a perfect conventional reel for trolling, bottom fishing, and other techniques used in freshwater and saltwater (Size 40 – 60 with 2-pin centrifugal brake that is good for casting). The oversized nonslip EVA grips, line out clicker alarm, easy access thumb bar spool release (40-60 sizes) and the classic look are everything you would expect of a round baitcasting fishing reel..
  • FISH INTO THE FUTURE - KastKing Rover c....
Check Stock

KastKing Rover Round Baitcasting Reel, Right Handed Fishing Reel,Rover40

  • BULLET PROOF – The hot Rover reel just became hotter. The KastKing Rover round baitcasting reel has been reinforced with thicker hard anodized aluminum side plates, CNC machined spool, precision cut brass gears, all alloy flawless level wind, industry-first stainless steel worm gear, patented metal idle gear, stainless steel shaft and other components for superior durability and corrosion protection..
  • MORE POWERFUL – You will love the stronger, more powerful KastKing Rover round baitcasting reel with a superior carbon fiber drag system. With its newly designed “Cymbal Washer” System, KastKing Rover now offers up to 30LB of smooth drag..
  • SUPER SMOOTH – KastKing Rover reels have premium MaxiDur double shielded stainless steel ball bearings (6 + 1 BBs on Size 40-60, 4 + 1 BBs on 70 – 90) for smooth operation..
  • VERSATILE – KastKing Rover is a perfect conventional reel for trolling, bottom fishing, and other techniques used in freshwater and saltwater (Size 40 – 60 with 2-pin centrifugal brake that is good for casting). The oversized nonslip EVA grips, line out clicker alarm, easy access thumb bar spool release (40-60 sizes) and the classic look are everything you would expect of a round baitcasting fishing reel..
Check Stock