Reviews Hydraulic Mechanics

ERfairdeal Hydraulic Transmission Jack, 34\ - 70\ Adjustable Height Telescoping Transmission Hydraulic Garage/Shop 1100 lbs/ 0.5 Ton 2 Stage Hydraulic 360° Swivel Wheel Lift Hoist for Car Lift (Blue)

  • 【 Maximum durability 】Wide base for stability. Strong and stable 4 legs base with 4 case iron swivel casters for ease of mobility. Strong heavy-duty steel construction for maximum durability..
  • 【 Rated Load:1100 lb.(0.5ton) 】 Lowered Height:34".
  • 【 Adjustable 】Fully adjustable saddle with corner bracket. Long safety chains for securing the transmission on the saddle. Fits more transmissions. Foot operated pump allows mechanics to use both hands to position and align transmissions. Swivel casters for maneuverability, with which you can easily guide a transmission safely and securely..
  • 【 Enhanced hydraulic 】Enhanced hydraulic pressure for greater lift range. Stainless bar for longer using, Suitable for Any automotive or light truck transmission installation or removal ..
  • 【 Stability & easy movement 】Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement..
Check Stock

Stark 8-Ton Double Cherry Picker Pump Long Hydraulic Ram Jack Engine Lift Hoist Manual w/Handle

  • It's the ideal jack for use on hydraulic cranes, engine hoists, and a wide variety of applications for mechanics, truckers, farmers and off-road enthusiasts.
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life.
  • Mounts directly onto shop cranes and features a slow release function while providing a long 24in.-44in. lift range.
  • Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40 degrees F and 105 degrees F.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
Check Stock

TUOKE Hydraulic Transmission Jack Vertical Lift, Adjustable Height 1100 Pounds, 2-Stage Hydraulic Telescopic Drive Jack, 360°Rotating Wheel Lift, With Foot Pump, Can Be Used For Car Lifting (Blue)

  • 【 Maximum durability 】Wide base for stability. Strong and stable 4 legs base with 4 case iron swivel casters for ease of mobility. Strong heavy-duty steel construction for maximum durability..
  • 【 Rated Load:1100 lb.(0.5ton) 】 Lowered Height:34".
  • 【 Adjustable 】Fully adjustable saddle with corner bracket. Long safety chains for securing the transmission on the saddle. Fits more transmissions. Foot operated pump allows mechanics to use both hands to position and align transmissions. Swivel casters for maneuverability, with which you can easily guide a transmission safely and securely..
  • 【 Enhanced hydraulic 】Enhanced hydraulic pressure for greater lift range. Stainless bar for longer using, Suitable for Any automotive or light truck transmission installation or removal ..
  • 【 Stability & easy movement 】Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement..
Check Stock

BILT HARD Motorcycle Lift, Heavy Duty Low Profile Hydraulic ATV Lifts, 1500 lb. Capacity, Steel

  • Durable and Sturdy: The hydraulic motorcycle jack features industrial quality for professional mechanics, hardcore and home workshop. It is constructed of high strength steel that is durable and long lasting. The powder coated finish also helps to make it rust and corrosion resistant..
  • Universal Lift：Bilt Hard ATV lift has a large enough 1,500 lb. lifting capacity and 5-1/2″ to 17″ lifting range to work for any motorcycle or ATV without having to source a different jack! Similarly you can use the same jack on your chopper, dirt bike, and sport bike without having to worry..
  • Easy Operation: Foot-activated hydraulic pump that allows for hands-free lifting and lowering. This makes it very easy to position and stabilize your bike while you use the motorcycle lift jack allowing for precise (and safe!) operation. But please MUST refer to the user manual and video to ensure safe use..
  • Safe and Convenient: The included multi-positional safety lock gives you added security when working on your motorcycle. The rubber pads on top of the saddle that provide a slip-free surface and keep your frame from getting scratched. The caster wheels and removable handle also makes your work easier and less effort..
  • Warranty: Meets international quality standards....
Check Stock

BILT HARD Motorcycle Lift, Heavy Duty Low Profile Hydraulic ATV Lift Jack with 1500 lb. Capacity, Steel

  • Durable and Sturdy: The hydraulic motorcycle jack features industrial quality for professional mechanics, hardcore and home workshop. It is constructed of high strength steel that is durable and long lasting. The powder coated finish also helps to make it rust and corrosion resistant..
  • Universal Lift：Bilt Hard ATV lift has a large enough 1,500 lb. lifting capacity and 5-1/2" to 17" lifting range to work for any motorcycle or ATV without having to source a different jack! Similarly you can use the same jack on your chopper, dirt bike, and sport bike without having to worry..
  • Easy Operation: Foot-activated hydraulic pump that allows for hands-free lifting and lowering. This makes it very easy to position and stabilize your bike while you use the motorcycle lift jack allowing for precise (and safe!) operation. But please MUST refer to the user manual and video to ensure safe use..
  • Safe and Convenient: The included multi-positional safety lock gives you added security when working on your motorcycle. The rubber pads on top of the saddle that provide a slip-free surface and keep your frame from getting scratched. The caster wheels and removable handle also makes your work easier and less effort..
  • Warranty: Meets international quality standards. 1 ....
Check Stock

darkFlash ZR12 Dual Blade 120mm GreenLED Case Fan with Large Air Circulation and LED Radiator Fan with Anti-Vibration Mounting Cooling Cooler for Computer Cases CPU Coolers and Radiator (2-Pack)

  • ... air input of the rear blade and the inertia momentum brings about the front blade. In return, the inertia of front blade accelerates the speed of the rear blade. Instant circulation, this way would increase input volume. Also, it delivers both high static pressures and high air flow for a superior fan experience..
  • HYDRAULIC BEARING: The hydraulic bearing with high quality and unrivaled performance. It can reduce the overflow of lubrication oil as well as the friction and noise. It features the very fluid dynamic bearing technology for minimum noise and maximum operating life..
  • SERRATED BLADE: Wind pressure is increased in a reasonable way with inlet air volume guaranteed. Silence treatment in key points under engineering mechanics theory is adopted to reduce air friction and achieve a quiet working and gaming environment at night..
  • IMPORTANT NOTE: The darkFlash fan compatible with 3 and 4 pin connectors. INSERT ONE TYPE OF THE CONNECTOR AT A TIME. You may short circuit of the motherboard if both connectors connected at the same time..
  • FOUR LED COLOR AVAILABLE: Red, Blue, White and Iceberg Blue. The ultra-bright LEDs mounted to the center of the fan provide a vivid blast of lighting..
Check Stock

TEMO SC-5L6 NF Aluminum Cut Carbide Rotary Burr File 1/2 Inch Head Cylinder Ball 1/4 Inch Diameter 6 Inch Long Shank

  • Aluminum cut SC-5L6 Cylinder Ball Nose Head Shape.
  • 1/4" (6.35mm) shank and 1/2" (12.7mm) head diameter.
  • Made with tungsten carbide and suitable for deburring and polishing. packaged with a clear plastic tube..
  • Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading. | They are used in electric, pneumatic, and hydraulic die grinder. These burrs are essentially electric files which can grind in tight spaces with precision focus. Used by mechanics, machinists, tradesman, and hobbyists..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

BILT Hard 3 ton Aluminum Racing Steel Floor Jack with 2 Jack Stands Low Profile Hydraulic Dual Piston Rapid Pump 6000 lb Capacity Blue

  • Includes Two Double Locking Jack Stands: It comes with 2 Packages. The heavy-duty jack stands safely support up to 6000 lb., They are constructed with....
  • Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a....
  • Low Profile: The aluminum racing floor jack has a 3-ton/6,000 lb. lifting capacity with a 3-7/8 in. to 19-1/2 in. lifting range, it provides you with....
  • Easy Operation: The 3 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into....
  • Rapid Pump: The high-performance low profile car jack has an exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It....
Check Stock

SENCTRL 5000 Psi Glycerin Liquid Filled Hydraulic High Pressure Gauge, 2.5" Dial Size, 1/4" NPT Lower Mount, Stainless Steel Case, for Air Gas Water Oil Pressure Test

  • Brass and Stainless Steel wetted parts for measuring non-corrosive liquid and gas pressure. Such as water, oil pressure test. Compatible with regulator, hvac, beer kegs, brew setups, hydraulic force and etc..
  • Circular dial is enclosed in a 304 stainless steel case for corrosion resistance. Glycerin filled inhibits pointer flutter and prevents damage to the internal mechanics from vibration and pulsation..
  • Measures pressure with dual scale (0-5000 psi/0-35000 kPa). Display accuracy is + or - 3/2/3% over the entire range of the gauge.
  • IP67 waterproof prevent condensation inside caused fogging of the window. Offer clear reading..
  • Lower mount male connection with 1/4" NPT thread.
Check Stock

TEMO SF-5L6 NF Aluminum Cut Carbide Rotary Burr File 1/2 Inch Head Round Tree 1/4 Inch Diameter 6 Inch Long Shank

  • These carbide burrs are designed to grind and shape aluminum and other non-ferrous metals. They are used in electric, pneumatic, and hydraulic die grinder. These burrs are essentially electric files which can grind in tight spaces with precision focus. Used by mechanics, machinists, tradesman, and hobbyists..
  • Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading..
  • Made with tungsten carbide and suitable for deburring and polishing..
  • Extra long 6" shank. Aluminum cut head and meet US standard with 1/4" (6.35mm) shank,1/2" (12.7mm) head diameter, 1" (25.4mm) cut length, and 7" total length. | SF-5L6 Round Nose Tree Head Shape.
  • Individually packaged with a protective plastic tube..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock