Reviews Hydraulic Hose Protection Sleeve

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • ...ylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offshore fishing, bass boats, flat boats, and many more..
Check Stock

Arashi Clutch Cable for KAWASAKI NINJA ZX10R ZX-10R 2011-2017 Stainless Wire Line and Rubber Motorcycle Accessories Green 2012 2013 2014 2015 2016

  • -3 hydraulic clutch lines feature clear PVC coated, PTFE lined, premium stainless steel braided hose.
  • PVC hose coating is extruded to the stainless braiding, adding great looks and abrasion protection to expensive parts, while offering resistance to damaging UV rays.
  • PTFE liner is an inert material, which is compatible with all hydraulic and brake fluids.
  • has a heat range of 158 degree F to 500 degree F.
  • Stainless steel braid is superior in pressure rating, flame resistance and volumetric expansion to all other materials..
Check Stock

MWMNUN 2400mm AN3 M10 Motorcycle Hydraulic Brake Line Oil Hose Pipe Fitting Stainless Steel Braided Compatible with ATV Motorcycle Motocross Pit Dirt Street Racing bike-2400mm blue

  • Size:Diameter is Φ10mm, Two side banjo bend is 28°to 90°.
  • Material： parts is steel with anti-rus coating. Hose Parts - Inner Layer is Nylon flexible hose, Middel Layer is stainless steel wire braided, Outside Layer is clear color PVC protection..
  • Fit FOR: Can be used for transfer pressure for all car's & motors UTV. ATV etc.hydraulic brake system AN3 1/8" ..
  • Package included:1 x Hydraulic Brake Line Oil Hose Pipe Fitting,6 cable ties..
  • NOTICE - Please check the description and compatibility chart to verify the fitment before your purchasing.
Check Stock

Hydraulic AC Hose Crimper 71500 Manual A/C Hose Crimper Kit Air Conditioning Repair Handheld Hydraulic Hose Crimping Tool, SK8057

  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") and reduced barrier hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") . Note: #8SRB and #6 is the same dies, with purple color..
  • This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability. Stamper hardness can reach up to 53 HRC, making the crimping effect better, and the hand‑held detachable hydraulic design makes the manual air conditioning hose compressor easier to use..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice. The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws..
  • Hose Crimper Kit comes with a whole set of accessories and one storage box, which makes it easier for you using. Easy to store, easy to organize, avoid missing..
  • 7*24 hours online service. If you encounter any questions during the shopping process, you are welcome to contact us at any time..
Check Stock

Akozon Hydraulic Pressure Gauge Hydraulic Hose Test Point Coupling M16 2-BSP1 / 4 0〜600BAR / 0〜8500PSI with 1.56m / 61.42inch Hose Kit Hydraulic Pressure Test Kits

  • 【Test the Pressure】This hose gauge kit is designed for testing pressure in a hydraulic system.Test the pressure of each point of the hydraulic system and the pipeline as a conductive fluid medium. The pressure measuring hose assembly is used in conjunction with the pressure measuring connector..
  • 【High Quality】This hydraulic pressure gauge kit has one strong and light aluminum case.Excellent material selection, the shell is made of 304 stainless steel, stainless steel material has the characteristics of wear resistance, , and good contact performance,well protect the inner accessories..
  • 【Chemical stability】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents.
  • 【Strong environmental adaptability】 ,resistance, adaptation to climate change, no absorption..
  • 【High Performance】The pressure measuring hose assembly has the advantages of advanced structure, reliable sealing, secure seizure, small size, light weight and easy use. Because the inner wall is smooth, the flow resistance is very small..
Check Stock

Toledo Hydraulic Hose Cut Off Saw Model 14, 4.5 HP, 115V, 3500 RPM cuts up to 2\ - 6 wire

  • Toledo Hydraulic is proud to bring you a medium to heavy duty hose cut off saw made in the USA..
  • The HC14 cut off saw is designed for quick, easy cutting of industrial wire reinforced hose..
  • Comes equipped with a 14" Scalloped blade, 4.5 HP Motor that runs at 3500 RPM..
  • Handles rubber covered wire reinforced hose ranging in size up to 2" ID hydraulic hose..
  • Handles 4" inner diameter for industrial hose..
Check Stock

Dometic SeaStar Pro Outboard Hose Kit, HO5722, Kevlar Reinforced, 22ft.

  • SeaStar PRO HO5722 Kevlar Reinforced Hydraulic Steering Hose Kit includes two (2) 22-Foot Hoses.
  • Custom Multi-Layered Composite Design with Kevlar Reinforcement for Strength.
  • Engineered to Provide your Steering System with Very Low Thermal Expansion Properties.
  • Designed to Exceed SAE and ABYC Specifications and Provide Precise Steering Control not Achievable with Hydraulic Industry Standard Hoses.
Check Stock

Hydraulic A/C Hose Crimper Hydraulic A/C Crimping Tool Hydra-crimp for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock

TIKSCIENCE Bleed Tube with Bridge Tube for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit

  • Application - Hydraulic steering filler bleed tube kit fit Seastar hydraulic steering systems.
  • Package Includes: Bleed kits include bridge tube and bottle to tube, used to replenish the steering system fluid of ships, hose with screw cap which....
  • Save Your Money - Hydraulic steering filler kit used to replenish oil for the ship's steering system fluid, entire steering system remains sealed....
  • Simple to Use - Connect the steering fluid bottle to the fitting with the adapter hose and vent the bottle per the instructions on the hose and bottle....
  • Service - Undergoes more stringent testing than aftermarket products, you will get a 90-day shelf life for our store. If you have any questions about....
Check Stock

1/2'' NPT Flat Face Hydraulic Quick Connect Coupling Set Skid Steer Loader Quick Disconnect Coupler with Dust Caps ISO12.5

  • ISO16028 Standard, New valve design, it can resistance damage from high flow and the pressure of impulse that providing advanced performance.
  • Sleeve locking mechanism is engaged by rotating sleeve after connection. It prevents accidental disconnection when the coupling is dragged along the ground.
  • Durable ball-locking mechanism assures reliable connections every time. A large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life..
  • Steel construction, zinc plated finished and hardened nipples and sleeves and solid barstock construction for maximum resistance to damage from hydraulic and mechanical shock. This Anti –Blowout Nitrile/PTFE bonded seal is designed to prevent blow-out or damage during severe service conditions..
  • Compatible with PARKER FEM Series, STUCCHI FIRG Series, AEROQUIP FD89 Series and HANSEN FF Series.
Check Stock