Reviews Hydraulic Angle Punching

BEAMNOVA Knockout Punch Set 15 Ton 1/2 to 4 Inch Hydraulic Metal Hole Punch Tools Set Hole Puncher with Case

  • QUALITY STEEL - Made of high hardness metal, durable, and not easy to deform..
  • MAX 15-TON PRESSURE - With a hydraulic pump, the Integrally Cast Cylinder Head has max 15-ton punching pressure, which allows you to punch holes with little burrs and effort..
  • SAFE - BEAMNOVA Hydraulic Hole Punch Kit features a rotatable ON / OFF switch for more safety..
  • COMPLETE KIT - The Metal Hole Punch Tools Set comes with 10 interchangeable dies and 2 draw studs of different sizes to meet multiple hole punching needs. A metal storage case with a handle for easy carrying..
  • WIDELY APPLICABLE - The Metal Hole Punching Set accommodates most materials such as stainless steel, aluminum, steel, plastic, etc. This toolset is great for installing and repairing wire pipelines, signal lamps, and instruments in metallurgy, petrol, electronics, electrical appliance, chemical industry, ship & machinery, and so on..
Check Stock

TEMCo Hydraulic Knockout Punch Driver Electrical Conduit Hole KO Tool 3/4 -16

  • Hydraulic unit provides true 13 US ton hydraulic punching force..
  • Compatible with GREENLEE and other domestic punch tooling, draw studs or arbors that use - 3/4-16 & 3/8-23 thread sizes.
  • Hydraulic unit is the same unit used for TEMCo TH0037 Knockout Punch..
Check Stock

Williams Hydraulics 5HD2S100 2 Speed Double Acting Hand Pump 128

  • Improve work efficiency: If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
  • Accurate pressure gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Large capacity tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside..
  • Working mode: Manual valve controls the return oil.
  • Application: The pump can be used for a variety of hydraulic equipment. Punching machine, bending machine, Jack split hydraulic products..
Check Stock

AMZCNC Hydraulic Knockout Hole Punch Driver Kit 1/2 to 4 inch Electrical Conduit Hole Cutter Set KO Tool Kit Metal Sheet Puncher (12TON(1/2"~4"))

  • Powerful 12 US TRUE TON Punching Capacity. Head can be freely selected 360°，Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads..
  • Deep Draw dies that are designed with an optimized angle on the cutter face that requires less force to make the cut, reducing operator and tool fatigue is provided on punch sizes ½", ¾", 1", 1¼", 1 ½" 2",2 ½",3", 3 ½" & 4".
  • Strong and durable punches are forged from 5140 steel. Efficient and durable, the tool is made of high carbon steel and has a stable hydraulic system..
  • Punching Thickness Capacity: 1/8 inch (11 ga) Steel, 1/16 inch Stainless Steel Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass and Plastic.
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
Check Stock

Electric Hydraulic Pump Power Pack Unit 2 Stage Single Acting Electric Driven Hydraulic Pump Pedal Solenoid Valve Control equipments 2-70 Mpa

  • Electric hydraulic pump input voltage: 110V.Motor power: 0.75KW.Function: Single-acting, manual valve.
  • The pump can be used for a variety of hydraulic equipments..
  • Working mode: Pedal Solenoid valve Control.
  • Punching machine, bending machine, Jack split hydraulic products.
  • If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Hydraulic tools Hydraulic Hole Digger SYK-8B Hydraulic Hole Punch Tool Hydraulic Knockout Tool Hydraulic Hole Puncher 22-60mm

  • Hydraulic Punch Driver SYK-8B 8T 22mm-60mm.
Check Stock

Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

LainKeen Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4", Exhaust Pipe Expander Stretcher Tool Set, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

VEVOR Hydraulic Pipe Crimping Tool Copper Crimping Pliers with Jaws 1/2 12.7mm 3/4 19.05mm 1 25.4mm 10T Hydraulic Copper Tube Fittings Crimper 40CR Steel for Copper Tube Plumbing and Fitting

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping....
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This....
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an....
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic....
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied....
Check Stock