Reviews Huepar Laser Level

Huepar Laser Level Self Leveling 3x360°Bluetooth outdoor Line Laser 3D Green Beam Three-Plane Leveling and Alignment Laser Tool with Pulse Mode&Remote Control, Li-ion battery and Hard Carry Case P03CG

  • BLUETOOTH TECH & HIGH VISIBILITY : Bluetooth connectivity enables to control ON/OFF the pulse mode and select the laser planes with Huepar App or remote control. This self-leveling laser level adopted the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. The green beam is twice bright as the red laser with a working range up to 130 feet of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode helps extend the laser range up to 200ft ..
  • LARGE CAPACITY LI-ION BATTERY&TYPE-C PORT: Huepar P03CG Laser Level adopted 10.8V / 2600mAh Li-ion battery and provides 10 hours running time. The Li-ion Battery can be charged separately and the four power indicator on the battery allow users to know the charging status. The Li-ion battery pack can be quickly released and installed for rasy use. With Type-C charging port, the laser level can also be charged by phone, laptop, power bank, car charger, etc..
  • 3x360° FULL LAYOUT LASER TOOL: Huepar Laser Level have one horizontal 360° plane, two vertical 360° planes, 12 laser lines, which can cover the floor, walls and ceiling all around the room. Each button on this laser level corresponds to a single laser line, you can easily choose to turn on/off any las....
Check Stock

Huepar Laser Level Multi-line - Four Vertical and One Horizontal Cross Lines Laser With Plumb Dot, Green Beam Alignment Self-leveling Laser Tool, 360°Rotating Base & Hard Carrying Case Included NT411G

  • EFFICIENT MULTI-LINE LASER TOOL: Huepar NT411G multi-line laser level projects one horizontal line, four vertical lines plus plumb down point -for leveling, aligning plumb and square applications. Users can short press H and V to switch the laser lines, Vertical lines cross at 90° angles in the ceiling, forming the up point to divide surfaces at a right angle. 4 vertical lines covering the ceiling, walls, and floor, effectively separate the room..
  • LI-ION BATTERY & TYPE C CHARGING PORT：Huepar Level laser tool adopted 3.7V / 2500mAh Li-ion battery for extended run-time about 4hours. 4 battery indicators on the Li-ion battery allow users to know the current battery level and charging status. There is a Type-C charging port on the Li-ion battery pack that can be charged separately. And the laser tool can also be charged by laptop, power bank, car charger, etc..
  • ROTATING BASE & 5/8" THREAD APPLICATION: The laser level with a metal micro-adjust fine turning pivoting base offers 360° rotation, the micro rotary knob enables users to make 360°adjustment and height adjustment, combined with the built-in bubble which enables adjustment of the position of the laser tool on uneven or sloping ground. The laser level comes with 5/8"-11 thread, laser dot can be p....
Check Stock

Huepar Laser Level Self-leveling 4x360 with Remote Control 16 Lines Green Beam up to100Ft, 4D Cross Line Tiling Floor Laser Tool, Magnetic Bracket, 5200mAh Li-ion battery 6-12 Hours Working Time-904DG

  • Huepar is committed to provide Best-in-Class service to our customers- 24/7 Service Team（response in 24hrs & solution in 48hrs）.
  • Lifetime Customer Support(hassle-free of exceeding the warranty).
  • Worldwide Maintenance Center( your product can be repaired or replaced faster )..
  • 4 X 360°LASER LINES&REMOTE CONTROL:This laser tool projects 4D laser lines. The 360° horizontal floor laser line is for tiling installation at a 3/5" distance. The top 360° horizontal line can be used for ceiling installation. The 16 laser lines cross at 90°that can cover the floor, walls and ceiling all around the room. With the remote control, the four 360 laser planes can be selected individually at a distance up to 100Ft. Don't worry about touching the laser tool by mistake during leveling..
  • LONG WORKING TIME & TYPE-C CHARGING PORT: Huepar 904DG Laser Level employed a large capacity of 3.7V / 5200mAh Li-ion Battery and provides up to 6-12 hours of running time. The Li-ion Battery comes with a Type-C charging port that can be charged separately. When taking out the battery, this 4D laser level can be used at the job site by plugged in directly. The 16 lines laser level can also be charged by laptop, power bank, car charger, etc..
  • MICRO-ADJUST BASE & MAGNETIC BRACKET: The....
Check Stock

Huepar 3x360 Green Beam 3D Laser Level with Bluetooth Connectivity, Three-Plane Self-Leveling and Alignment Cross Line Laser Level-360° Horizontal and Vertical Lines Tool with Hard Carry Case 603BT-H

  • ✔️BLUETOOTH TECHNOLOGY: With Bluetooth connectivity, users can control the setup of the laser from across the room with smart phone and Huepar App. Huepar App is free to download and use, the App can switch ON/OFF the laser lines and pulse mode, select the laser planes, adjust the line visibility and provide out-of-level alarm..
  • ✔️MULTIFUNCTIONAL 3 x 360 LASER TOOL: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depending on job site applications. With our smart pendulum system, this laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle..
  • ✔️TRIPLE POWER TECHNOLOGY: This 360 laser tool employed the included large capacity lithium battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. In addition, this laser tool can be used at job site with direct input charging when taking out the battery. Charging protection helps prevent the tool from overcharge. 4 battery indicators on keypad allow users to know the current battery volume anytime..
Check Stock

Huepar 3 x 360 Green Beam 3D Laser Level with Bluetooth Connectivity Three-Plane Self-Leveling and Alignment Cross Line Laser Level -One 360° Horizontal and Two 360° Vertical Lines Laser Tool 603CG-BT

  • ✔️BLUETOOTH TECHNOLOGY: With Bluetooth connectivity, users can control the setup of the laser from across the room with smart phone and Huepar App. Huepar App is free to download and use, the App can switch ON/OFF the laser lines and pulse mode, select the laser planes, adjust the line visibility and provide out-of-level alarm..
  • ✔️MULTIFUNCTIONAL 3x360 LASER TOOL: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depending on job site applications. With our smart pendulum system, this laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle..
  • ✔️TRIPLE POWER TECHNOLOGY: This 360 laser tool employed the included large capacity lithium battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. In addition, this laser tool can be used at job site with direct input charging when taking out the battery. Charging protection helps prevent the tool from overcharge. 4 battery indicators on keypad allow users to know the current battery volume anytime..
Check Stock

ATOLS 16 Lines Laser Level, 4d Laser Level 360 Self Leveling, Green Laser Level Horizontal Vertical with 2 Rechargeable Battery & Remote Controller for Picture Hanging and Construction

  • ...lines cross at 90angles makes user quickly visualize and finish square layout..
  • LCD DISPLAY&BLUETOOTH TECH: The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously..
  • TRIPLE POWER METHODS&TYPE-C CHARGING PORT: This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc..
  • MULTIFUNCTIONAL LASER TOOL: The four 360 laser planes can be selected individually by separate H and V button on the keypad. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of self-leveling ran....
Check Stock

Huepar 16 Lines Self-Leveling Laser Level 4×360°Cross Line Laser with Receiver – LCD Screen, 4D Bluetooth Green Beam Tiling Floor Laser Tool, 360°Horizontal/Vertical Laser Kit -Remote Control S04-5RG

  • ...rovides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver included in the kit..
  • ✔️LCD DISPLAY&BLUETOOTH TECH: The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously..
  • ✔️TRIPLE POWER METHODS & TYPE-C CHARGING PORT: This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger,....
Check Stock

Huepar Self-leveling Laser Level with Rechargeable Li-ion Battery- Green Beam Cross Line Laser Level with Pulse Mode for Ceiling/Floor/Wall Application, Magnetic Metal Base Included - 5011GPro

  • ⭐【Rechargeable Lithium Battery & Type-C Charging】: Powered by a Built-in Li-ion Battery, Huepar 5011G laser level offers remarkable run time and can last about 10 hours of continuous operation when fully charged. With Type-C charging port, user can charge the laser level by laptop, power bank, car charger, etc. And it is recommended to charge for more than 4 hours before using..
  • ⭐【Brighter Green Beams & Power-saving Pulse Mode】: The laser unit adopts the bright Osram green laser beam with a working range up to 85 feet (100LUX) of accuracy within ±1/9 Inch at 33 Feet. When switching to pulse mode, the laser beam will become dimmer to extend the working time and relieve eye strain. The outdoor pulse mode extends the laser range up to 165 feet with Huepar Line Laser Receiver in bright-light or outdoor conditions..
  • ⭐【Self-leveling Mode & Manual Mode】: Unlock the pendulum, Self-leveling Mode is enabled. The laser beam will blink continuously when the tool is beyond self-leveling range 3.5° ± 0.5°. Once pendulum locked, it switches to Manual Mode to lock lines for use at any angle. Ideal for installing lighting fixtures, hanging pictures, wall tiling or floor tiling, etc..
  • ⭐【Magnetic Pivoting Base】: With 1/4" female thread, the las....
Check Stock

Huepar 16 Lines Self-Leveling Laser Level 4 x 360°Cross Line Laser with LCD Screen, 4D Bluetooth Green Beam Tiling Floor Laser Tool -360°Horizontal/Vertical Laser -Remote Control&Hard Carry Case S04CG

  • ...oss at 90°angles makes user quickly visualize and finish square layout..
  • ✔️LCD DISPLAY&BLUETOOTH TECH: The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously..
  • ✔️TRIPLE POWER METHODS&TYPE-C CHARGING PORT: This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc..
  • ✔️MULTIFUNCTIONAL LASER TOOL: The four 360° laser planes can be selected individually by separate H and V button on the keypad. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of sel....
Check Stock

Huepar 4x360 Laser Level Self-leveling 16 Lines Green Beam 4D Cross Line Tiling Floor Laser Tool-2 x 360 Horizontal & 2 x 360 Vertical Laser Lines with Two Li-ion Batteries and Hard Carry Case-LS04CG

  • ...on. With the lifting base, the 360° floor laser can raise from the surface to project over and travel past uneven surfaces or obstructions between 1" and 3.54" height. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout..
  • ✔️TWO BATTERIES & TYPE-C CHARGING PORT: The Huepar LS04CG laser level comes with 2 x 5200 mAh lithium-ion batteries for convenient replacement and continuous use. 4 indicators on the battery let users know the current battery level and charge status. There is a Type-C charging port on the batteries that can be charged separately, and the battery can also be charged by phone, laptop, power bank, car charger, etc..
  • ✔️MULTIFUNCTIONAL LASER TOOL: The four 360° laser planes can be selected individually by separate H and V button on the keypad. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of self-leveling range ±4°. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver LR-6RG/LR-5RG..
  • ✔️MAGNETIC BRACKET&PORTABLE DESIGN: 360°Strong magnetic bracket allows for quick positioning to me....
Check Stock