Reviews Hub Bearings

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

LEAPGOMAX Golf Cart Front Wheel Hub Assembly with Hub Bearing/Oil Seal/Nuts/Dust Cover for EZGO PDS&TXT/Medalist Gas & Electric 2001-Up, Replace OEM# 70895G01, L44643(Pack of 2)

  • ⛳【Universal Fit】This golf cart wheel hub assembly fits 2001.5-2013 Gas or Electric TXT and ST models.(NOTES: DOES NOT fit EZGO RXV or Older TXT before 2001).
  • ⛳【OEM Parts】Replace OEM Number:70895-G01,AXL-0013, 9624, 14413.
  • Fit Bearing models: L44643，L44642，L44610..
  • ⛳High Quality Bearings】High quality bearings in our ezgo hub assemblies. If your bearings go bad, it can cause a wobble or clicking sound. Replacing the ezgo txt front hub assembly will eliminate these issues..
  • ⛳【High-density Aluminum Front Hub Assembly】 Premium quality - reliable in operation, long working life.Factory OEM replacement. Meets or Exceeds OEM Specification..
  • ⛳【Package Kits】These wheel hub assemblies include bearings, oil seals, dust caps, nuts, aluminum housing with studs and replace OEM #s 70895-G01, 70895G01..
Check Stock

Seachoice 53021 1 Inch Trailer Wheel Galvanized Hub Kit – 4 Lug – 1,250 Pound Capacity – Pre-Greased

  • Bearings and hub cavity are 100 percent pre-greased.
  • Includes bearings, seals, dust caps, cotter pin, and lug nuts.
  • Hot dip galvanizing process offers superior resistance to corrosion.
  • Grease seal and bearings are pre-assembled.
  • 4 lug wheel hub – 4 lug nuts on a 4 inch bolt pattern.
Check Stock

iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug

  • ...s.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56" O.D - 1.72" I.D). Please check the image..
Check Stock

Wheel Bearing Install/Removal Press Tool for Polaris RZR 900 1000 Turbo/Sportsman 1000 850 XP 550 / Scrambler 850 1000 / Ranger 1000 900 800 700 570 500 XP

  • BENIFITS - Using this installation and removal tool,Changing your wheel bearings become fast and correctly.
  • USAGE - This kit includes a holder for the rear hub and then a driver to press the old bearing out of the hub. After removal,flip over the hub and....
  • APPLICATION - Fits the following models and more using hub part number 5136689, 5136690 and wheel bearing part number 3514699 and 3514627:.
  • 2011-18 RZR 900 (All models, front and rear bearings) 2014-18 RZR 1000 (All models including Turbo, front and rear bearings).
  • INCLUDES - (1) Torpedo Installer Tool (1) Holder.
Check Stock

Seachoice Trailer Wheel Hub, 1 Inch Diameter Axle, 5 Lug, Galvanized, Pregreased

  • Bearings and hub cavity are 100 percent pre-greased.
  • Includes bearings, seals, dust caps, cotter pin, and lug nuts.
  • Hot dip galvanizing process offers superior resistance to corrosion.
  • Grease seal and bearings are pre-assembled.
Check Stock

27213 Master Wheel Hub and Bearing Remover and Installer Tool Kit, Back and Front Wheel Bearing Puller Kit, Back and Front Wheel Hub Puller

  • 【WIDE COMPATINILITY 】-- Universal, provides various size of adapters makes installing wheel hubs and bearings on most domestics and foreign cars-rear, front, and four-wheel drive much easier. Compatible with BMW/Benz/Porsche/VW and most domestic/Asian/European vehicles. Works on Front, Rear and All-Wheel Drive Vehicles..
  • 【UPGRADE DESIGN】-- Designed with slide-hammer-free removal, make the job much simple that can easily install the hub and bearing changes on most cars. Under without the use of a hammer or a shop press, only use this tool be able to easily remove and install wheel hub and bearing assemblies as well as inner bearings. Whether it is a professional or DIY mechanic, can be easily, accurately and safely completed the disassembly and installation of the wheel hub and bearing on the vehicle..
  • 【SUPERIOR MATERIAL】-- Made of solid carbon steel with resisting impact and no deformation, surface black anodized anti-rust finish to anti-rust and anti-corrosion for years of trouble-free use. Mold-blown plastic case is convenience to carry and storage. Alternative to OEM 27213, quality and function meet to OEM. High precision and hardness, designed with o....
Check Stock

Detroit Axle - 2WD Only 6-Lug Front Wheel Bearing Hub Assembly for - 2WD Only 2000-2006 Silverado 1500, Sierra 1500, Yukon No Denali or Z71 - Driver Passenger

  • Front Wheel Bearing Hub Assembly 6-lug 2-pc Set For 2WD/RWD Models Only! This Front End Service Kit Contains A Front Left Wheel Hub, Front Right Wheel Hub, And Front Wheel Bearings To Complete A Wheel Bearing Hub Assembly Front Kit. This Wheel Hub Kit Is Also Known As A Front Wheel Assembly, Wheel Hubs Assembly, Front Assembly, Front Hub Bearing Assembly, Left Front Hub Assembly, Wheelbearing And Hub Assembly, Wheel Hub Assemblies, Wheel Hub Front, And A Front Hub Bearing Assembly Pair..
  • Hub Specification: Lugs:6 | Flange Type: 3-Bolt Triangular | ABS Type: Sensor Wire.
  • Replacement Hub And Wheel Bearing Assembly For 2WD Chevrolet Silverado 1500 1999 2000 2001 2002 2003 2004 2005 2006 2007. Chevy Suburban 1500 2000 2001 2002 2003 2004 2005 2006. Chevrolet Tahoe 2000 2001 2002 2003 2004 2005 2006. The Parts In This Kit Are Direct Replacements For Chevy Silverado Wheel Bearing, Silverado Front Wheel Bearing, Silverado Wheel Hub, Tahoe Hub Assembly, Chevy Tahoe Wheel Bearing, Wheel Hub Assembly Silverado, Suburban Wheel Bearing, And A Chevy Tahoe Hub Assembly..
  • Replacement Wheel Hub And Bearing Assembly Front For 2WD Cadillac Escalade Esv Ext 2002 2003 2004 2005 2006. Gmc Savana 2500 2003 2004 2005. Gmc Sierra 1500 1999 2000 2001 2002 2003 2....
Check Stock

iBroPrat 1 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle

  • ...s.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 16pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 1PCS DUST CAPS & 2PCS SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56" O.D - 1.72" I.D). Please check the image..
Check Stock

TIMKEN SP550207 Axle Bearing and Hub Assembly

  • This Timken SP550207 Wheel Bearing and Hub Assembly replaces Motorcraft HUB30, Ford 5L342C530AE, Ford 5L3Z1104AA, Ford 5L3Z1104AB, Ford 6L342C530AA,....
  • RESTORE SMOOTH DRIVING: The precision-engineered Timken Wheel Bearing and Hub Assembly provides friction-free movement and rotation. Its capacity to....
  • SELECT A DURABLE ASSEMBLY: The integrated heavy-duty raceway reduces vibrations and increases stiffness, improving bearing performance and extending....
  • RELY ON QUALITY BEARINGS: Timken Bearings feature precision tolerances, proprietary internal geometries, and quality materials. As the leading....
  • TRUST IN TIMKEN: What sets Timken apart is their technology and expertise in materials, friction management, and mechanical systems, not to mention....
Check Stock