Reviews Hss Left hand Spiral Tap

COMOWARE Screw Extractor & Left Hand Drill Bit Set- Broken Bolt Remover HSS M2, 10pcs with Metal Index Case

  • EASY OUT REMOVING: It is more convenient and easy to remove the broken screw from the damaged workpiece by using the left hand drill bit which coordinates with the screw extractor. Spiral groove on screw extractor can go deep into screw to increase grip force to remove studs, screws and bolts around the house, garage or on your job project..
  • HIGH QUALITY CARBIDE MATERIAL: The left hand drill is made of HSS M2. Compared with ordinary high speed steel, M2 material can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials..
  • UNIQUE DESIGN: The 118°angle makes it easier to cut into the workpiece with small axial resistance. This design can not only increase the length of cutting edge work but also decrease the nominal thickness of cutting layer, which improves heat dissipation and durability with better cutting effect..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a index case, convenient to use and carry..
  • SET INCLUDING: 5pcs alloy steel screw extractors and 5pcs HSS M2 left hand drill bits. Screw extractor in....
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

Gunsmithing At Home For Beginners And Novices

  • 49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....
Check Stock

AKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16",....
Check Stock

YESKING 50-Piece Bolt Extractors Screw Extractor Set, Easy Out Bolt Extractor Set Stripped Screw Remover and Drill Bits for Removing Broken Studs,Frozen,Rounded-Off Bolts

  • 【50-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 4-in-1 screw & nut remover kit and drill bit kit.It contains 13pcs multi-spline screw extractors, 16pcs left hand HSS drill bits, 6pcs spiral screw extractors,13pcs nut removers,1pcs extension bar and 1pcs ratchet wrench.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. ....
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

Topec 49pcs Screw Extractor/Drill Bit Set, Professional Remove Set for Removing Broken Studs, Bolts, Socket Screws and Fittings

  • 49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....
Check Stock

XJX Screw-Extractor Set | Easy Out Bolt Extractor Set | Multispline and Spiral Extractor Set | Perfect for Stripped Screws, Studs, Fittings, and Lugs, Left-Hand Drill Bits | 1/8" to 13/32"（25-Piece）

  • 【25-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit.It contains 10pcs multi-spline screw extractors, 10pcs left hand HSS drill bits, 5pcs spiral screw extractors.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. Easily remove damaged bolts, nuts and screws even if they are ....
Check Stock

Topec 35-Piece Screw Extractor and Drill Bit Set, bolt extractors, Multi-spline Extractors, and Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings

  • 35-PIECE MULTIFUNCTIONAL SET- 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits, 6pcs spiral screw extractors,.
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 35 models of parts including imperial sizes such as: 1/8", 5/16", 5/8", 7/16", 11/32", 1/4" etc. You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill these fasteners.
Check Stock

Luckyway 10-Piece Screw Extractor and Left Hand Drill Bit Set, Bolt Extractors, for Removing Broken Studs, Bolts, Socket Screws, and Fittings

  • ... bolts and other fittings effectively..
  • MATERIAL - Made of durable hardened steel and tempered twice for extra hardness, promising you a long lasting screw extractor tool of rugged material and outstanding performance..
  • FEATURES - Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.A musthave tool for carpenters, handymen, contractors, construction workers or DIY enthusiasts alike! Get rid of stripped, obnoxious screws in seconds! Even the most rusted, worndown, and embedded screws are no match for this handy remover kit..
  • HOW TO USE - A broken bolt or screw may be removed from a hole with a Screw Extractor. First, drill a hole in the broken bolt. The correct drill size to use is stamped on each Screw Extractor. Insert Screw Extractor in the hole and, with a Tap Wrench, turn counterclockwise. The Screw Extractor acts like a corkscrew. It grips into the sides of the drilled hole and removes the broken part on its own threads without damaging the threaded hole..
Check Stock