Reviews Howo Truck Flywheel - BestBuyersPro.com

Schaeffler LuK DMF123 Dual Mass Flywheel, OEM Dual Mass Flywheel, LuK Replacement Clutch Parts

OEM Clutch Replacement Kits: Our LuK DMF123 dual mass flywheels suit a huge variety of vehicles! The flywheel is an integral part of your clutch replacement..
Replacement Flywheel: Today’s tightly packaged clutch systems leave little room for error. The clearance between the disc damper and the flywheel-to-crankshaft bolt heads is so small that the flywheel must be replaced with every clutch installation..
LuK Flywheel: The dual-mass flywheel absorbs engine vibrations before they are transmitted to the driveline where they can rattle gears. It has a primary section that bolts to the crankshaft, and a secondary section, which the clutch is bolted onto..
Dual Mass Flywheel: The primary section of the LuK DMF dampens, isolates engine vibrations and prevents engine torque spikes from damaging the transmission. By design, dual-mass flywheels cannot be resurfaced..
OEM Flywheel: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each OEM part is carefully crafted to suit the exact needs of a car, keeping in mind....

OTC's Truck Clutch & Flywheel Handler turns clutch replacement from a back breaker to a simple one person job.
Handles 14 inch and 15-1/2 inch clutch assemblies weighing up to 150 lbs.
Swivel casters and a 9 inch to 37 inch lifting range provide supreme manueverability during installation - allowing precise alignment of the clutch assembly to the back of the engine.
Includes a 2 inch splined shaft with a 1-1/4 inch pilot to aid in alignment.
high-grade materials ensure quality performance over the lifetime of the tool.

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.

OEM Clutch Replacement Kits: Our LuK DMF019 dual mass flywheels suit a huge variety of vehicles! The flywheel is an integral part of your clutch....
Replacement Flywheel: Today’s tightly packaged clutch systems leave little room for error. The clearance between the disc damper and the....
LuK Flywheel: The dual-mass flywheel absorbs engine vibrations before they are transmitted to the driveline where they can rattle gears. It has a....
Dual Mass Flywheel: The primary section of the LuK DMF dampens, isolates engine vibrations and prevents engine torque spikes from damaging the....
OEM Flywheel: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each OEM part is....

Easy to install and use, prevent the chain from falling behind the flywheel and reduce the sediment on the flywheel. The perfect design can firmly fix the hub, and the hub is not easy to fall off..
Usage: This product is used to protect the steel wire installed in the flywheel of the rear wheel. It is suitable for the wheel hub of the disc brake box and the chain protector of the variable speed flywheel of the mountain bike..
Material: made of high-quality transparent plastic, good toughness, not easy to crack or damage, durable..
Rotary flywheel guard plate: outer diameter 164mm / 6.46in, inner diameter 37mm / 1.46in, suitable for 34T..
Package content: 2 pieces of bicycle flywheel spoke protectors..

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.

Easy to install and use, prevent the chain from falling behind the flywheel and reduce the sediment on the flywheel. The perfect design can firmly fix the hub, and the hub is not easy to fall off..
Usage: This product is used to protect the steel wire installed in the flywheel of the rear wheel. It is suitable for the wheel hub of the disc brake box and the chain protector of the variable speed flywheel of the mountain bike..
Material: made of high-quality transparent plastic, good toughness, not easy to crack or damage, durable..
Rotary flywheel guard: outer diameter 138mm/5.43in, inner diameter 37mm/1.46in, suitable for 28T-34T..
Package content: 2 pieces of bicycle flywheel spoke protectors..

【 Exclusive Design 】The set is designed for quick water pump replacement. Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
【 Time Saver 】Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Easy to install and effectively keep the flywheel from turning..
【 Easy to Use 】 Locks the flywheel easily to the transmission when changing water pump. The flywheel locking tools work with Duramax 2500 / 3500 pickups and 4500 / 5500 trucks..
【 Heavy Duty 】Comes with flywheel holder OEM no.AM-J-44643-A, AM-J-44643-B, and 36 mm 12 point socket. Constructed of quality CR-V Steel with a manganese phosphate coating to resist rust and corrosion..
【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..

Function: the flywheel guard plate is used to protect the steel wire installed in the flywheel of the rear wheel..
Size: Outer diameter 135mm/5.31in, suitable for cassette hubs with hub lugs diameter of 54mm/2.13in. The three-claw guard can also fit the cassette V-brake hub, but the actual use depends on the diameter of the hub lug..
High performance: the three claw design can firmly fix the hub, and the hub is not easy to fall off..
Easy to use: it is installed in the flywheel of the rear wheel to protect the steel wire, prevent the chain from falling onto the back of the flywheel and reduce the sediment thrown onto the flywheel..
Package content: 2 pieces of clip type three claw bicycle flywheel spoke protector. Be sure to check the data before purchasing. The diameter of flower drum ear piece is 54mm / 2.13in..