Reviews Hot Shoe Remote Trigger

JJC 3-in-1 Wireless Flash Trigger & Shutter Remote Control with Two Receivers Kit for Nikon D850 D500 D5 D810 D810A D800 D700 D4s D4 D3 D3s D3X and Other Nikon Camera with 10-Pin Connector

  • Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Nikon (replaces MC-30), studio....
  • 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency..
  • Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger..
  • The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ,....
  • Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended..
Check Stock

Neewer 16 Channel Wireless Remote Flash Trigger and 2.5mm PC Receiver for Compatible with Canon 580EX II 580EX 550EX 540EZ Nikon SB900 SB800 SB600 SB28 Neewer TT860 TT850 TT560 Olympus Pentax Sigma

  • The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control..
  • The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption.
  • the products can work under the standby mode for more than one year with only one battery.
  • continuously trigger for thirty thousand times..
  • Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability.
  • sensitive reaction speed, the highest synchronous speed can reach 1/25 sec..
  • The trigger current is only .1MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface..
  • Note: PT-16/PT-16NE use the whole new system,So it can not work with any other flash trigger..
Check Stock

JJC 3-in-1 Wireless Flash Trigger & Shutter Remote Control with Two Receivers Kit for Canon EOS R5 5D Mark IV III II 6D Mark II 7D Mark II 5Ds R 1DX Mark III II 1Ds Mark III 50D 40D 30D

  • Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Canon (replaces RS-80N3), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs..
  • 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency..
  • Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger..
  • The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc.
  • Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended..
Check Stock

JJC 3-in-1 Wireless Flash Trigger & Shutter Remote Control with Two Receivers Kit for Nikon Z7 Z7II Z6 Z6II Z5 D750 D780 D7500 D7200 D5600 D5500 D5300 D5200 D3300 D3200 Coolpix P1000

  • Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Nikon (replaces MC-DC2), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs..
  • 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency..
  • Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger..
  • The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc.
  • Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended..
Check Stock

JJC 3-in-1 Wireless Flash Trigger & Shutter Remote Control with Two Receivers Kit for Canon Rebel T8i T7i T6i T6 T5i T5 T4i T3i SL2 SL1 EOS 90D 80D 70D 77D 60D RP R

  • Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Canon (replaces RS-60E3), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs..
  • 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency..
  • Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger..
  • The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc.
  • Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended..
Check Stock

Optical Flash Slave Trigger JJC Hot Shoe Sync Adapter with PC Socket,Optical Sensor & 1/4 -20 Threaded Socket Cold Shoe for All Flashes Speedlight with Standard ISO 518 Hot Shoe-1 Pack

  • The flash standard hot shoe on the top is perfectly fit for off-camera flash, microphone, studio light other equipment or devices with standard ISO....
  • Optical Sensor: Optical flash slave trigger for lag-free firing of a second flash unit. For shoe-mount flash units-no cord required.
  • The PC female outlet on the side, enabling you to trigger flash mounted onto the upper hot shoe and additional flash or studio light (A sync cable is....
  • The standard cold shoe on the bottom is compatible with DSLR, mirrorless digital camera, camcorder and other cameras with standard hot shoe.
  • The 1/4"-20 Tripod Socket can be mounted onto a tripod with a 1/4"-20 male screw. And the lock nut helps you mount the devices tightly.
Check Stock

SLOW DOLPHIN 1/4 Inch Hot Shoe Mount Adapter Tripod Screw for DSLR Camera Rig(4Packs)

  • Easy to install microphone, LED light, monitor to DSLR, camcorder or digital camera, Flash Remote Trigger or adapt anything else that with a 1/4-20 receptacle.
  • Fits on the hot shoe of most cameras and can connect 2 cameras together.
Check Stock

Neewer FC-16 3-in-1 2.4G 16 Channels Wireless Remote Flash Trigger Compatible with Sony A9II A9 A7RIV A7RIII A7RII A7R A7III A7II A7 A7SII A7S A6600 A6500 Sony DSLR Cameras

  • Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Sony multi connector, studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs..
  • 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency..
  • Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger..
  • The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc.
  • Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended..
Check Stock

Neewer Vision 4 300W Li-ion Battery Powered Outdoor Studio Flash Strobe (1000 Full Power Flashes with 2.4G System, Trigger Included), Bowens Mount with Softbox Kit for Video Location Photography

  • KIT INCLUDES: (1)VISION4 Monolight with 2.4G System(Trigger and Li-ion Battery Included).
  • This flash kit is perfect for convenient battery cordless location shooting.
  • PLEASE NOTE: Vision 4 only supports M, Multi, 2.4G wireless remote.
  • Extremely short flash duration: from 1/1000 to 1/10000 seconds. 6 steps of power adjustment( 1/64 to 1/1).
  • VISION4 STUDIO FLASH: High GN60,German Engineered 300W flash includes a wireless trigger.
  • Large capacity lithium battery pack to provide 700 Full Power flashes and fast recycle time( 0.01-2.5 seconds).
  • With 7800mAh Li-ion battery, extremely short flash duration and high Gn60, this German engineered 300W flash Meets all location shooting demands Whether shoot fast-moving objects or shoot in different lighting environments.
  • 13W energy-saving LED Modeling lamp. Stable color temperature at 5600±200K over the entire power range.
  • Compatible with Canon Nikon Panasonic Olympus Pentax with Standard Hot Shoe and Sony Camera with New Mi Hot Shoe like Sony A7 A7S/A7SII A7II A6000 A6300 A6500.
Check Stock

Pixel TF-322 Flash Hot Shoe Sync Adapter with Extra PC Sync Port Dedicated for Nikon DSLR & Flashgun

  • Pixel TF-322 Hot Shoe Converter for Nikon, Easy to install - just slide into your camera's hot shoe. This adapter can be used to connect third party flash via standard hot shoe or PC sync cord socket..
  • Work with most flash guns in auto mode or manual mode ，Only supports the i-TTL mode of Nikon's original flash..
  • The Pixel Hot Shoe Adapter would be a great addition to your studio.Easy to use and would be perfect for any of your photography need..
  • This hot shoe adapter is perfect to mount a flash that does not have a sync connector for connection to a PC sync cord. It will allow those cameras to trigger external flashes by using the sync cord..
  • Pixel TF322 hot shoe adapter fits all Standard ISO 518-2006 hot shoe flashgun including the SB-900, SB-800, SB-600, SB-80DX, SB-50DX, SB-30, SB-29/29s, SB-28/28DX, SB-27 etc. Not suitable for devices with sync voltage of more than 6 volts.
Check Stock