Reviews Hot Dipped Galvanized Chain

Heavy Duty Fork Latch - Malleable -2 x 3 Chain Link Gate

Five Oceans Windlasses Anchor Rodes are assembled by professionals in the USA and are the best option for your anchoring system when you have a....
Composed of 9/16-inch 100% Nylon rope, ideal for anchoring systems, and spliced to 5/16 inches calibrated hot-dipped galvanized steel HT G4 chain.
Ideal for use with windlasses, tapered spliced for a smooth rope to chain transition, with a High Test G4 Galvanized Steel Chain.
Rope: 200 feet (60m) x 9/16 inches (14 mm) Nylon three-strand anchor rope. Chain: 20 feet (6m) x 5/16-inch (8mm) HT G4 galvanized steel chain. Screw....

Five Oceans Windlasses Anchor Rodes are assembled by professionals in the USA and are the best option for your anchoring system when you have a windlass onboard.
Composed of 5/8-inch 100% Nylon rope, ideal for anchoring systems, and spliced to 3/8 inches calibrated hot-dipped galvanized steel HT G4 chain.
Ideal for use with windlasses, tapered spliced for a smooth rope to chain transition, with a High Test G4 Galvanized Steel Chain.
Rope: 250 feet (77m) x 5/8 inches (15mm) Nylon three-strand anchor rope. Chain: 20 feet (6m) x 3/8-inch (9 mm) HT G4 galvanized steel chain. Screw Pin D Shackle: 3/8 inches Stainless Steel.

Five Oceans Windlasses Anchor Rodes are assembled by professionals in the USA and are the best option for your anchoring system when you have a windlass onboard.
Composed of 1/2-inch 100% Nylon rope, ideal for anchoring systems, and spliced to 1/4 inches calibrated hot-dipped galvanized steel HT G4 chain.
Ideal for use with windlasses, tapered spliced for a smooth rope to chain transition, with a High Test G4 Galvanized Steel Chain.
Rope: 200 feet (60m) x 1/2 inches (12mm) Nylon three-strand anchor rope. Chain: 15 feet (4.5m) x 1/4-inch (6mm) HT G4 galvanized steel chain. Screw Pin D Shackle: 1/4 inches Stainless Steel.

5/16" x 5' galvanized steel anchor lead chain.
Working Load Limit: 2,000 lbs./Breaking Strength: 8,000 lbs..
Lead chains enhance anchor holding power and limits abrasion between the anchor and anchor line.

✔GALVANIZED STEEL: Delta boat anchors 4.4 lb plow anchor constructed from hot dipped galvanized steel.
✔WELL PERFORMS: Boat anchor kit 4.4 lb is all purpose designed which holds in a variety of seabeds including mud, sand, rock, and coral.
✔EASY SET RELEASE: Boat anchors 4.4 lb is with trip-line attachment for easy release and fast set with good resistance to tides and wind.
✔RELIABLE DESIGN: Pontoon anchor for boat has combination of angled fluke design and weight hold boats effectively.
✔SS CHAIN SHACKLES: Boat sand anchor 4.4 lb with two sizes options: 4.4lb (2kg) with 2 meters length Chain 1/4 inch & double shackles 1/4, 8lb (3.5kg) with 2 meters length Chain 1/4 inch & double shackles 1/4. 4.4lb anchor fits 12 to 16 FT boat, 8lb anchor fits 17 to 24 FT boat..

Galvanized Steel Boat Anchor: For Medium boats (20-32ft) this is a perfect plug and play kit. No more worrying about buying the boat anchor rope and chain, splicing the line to the chain, drilling a hole for easier retrieval. Just order this and go..
Super Holding Power: Fluke style boat anchors are perfect anchors for sand or mud bottoms. The flukes articulate and will dig into the bottom, allowing these relatively lightweight fluke anchor kit to hold tight. Just make sure you give it the opportunity to bury into the ground..
Boat Anchor Fluke Style: Sometimes pontoon boat anchor kit get hung up and nothing is worse than having to cut your line because you can't free it. We predrill a recovery hole so you can recover it (without scuba gear) if it does get stuck. We drill the hole and then galvanize it, so you don't have to worry about rust and corrosion or drilling the hole yourself. We recommend setting up the anchor like the image using zip ties, so if you need to break it free you are able too...
Everything You Need Included: 100ft of 3/8in triple strand nylon rope that has an eye splice. 2 - 3/8in Hot dip galvanized bow shackles with holes for wiring shut. 8ft 5/16in hot dip galvanized chain. 1 Hot Dipped Galvanized Steel Fluke danforth anchor....

U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized，The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..

3-1/2" (16d) Exterior Hot Dipped Galvanized Common Framing Nail for General Construction Purposes.
Hot Dipped Galvanized to Prevent Corrosion and Rusting - Smooth Shank - 8 Gauge (0.165).
Common Nails are Able to Carry More Load than Box Nails Due to Heavier Shank Size.
Durable HD Coated For Outdoor Use, Pressure Treated Wood, Construction, Carpentry and Framing.
Our Galvanized Common Nails conform to ASTM F1667 Standards.

SIZE: 1/2" D x 3 -1/16" W x 3-5/16" L (Exactly AS Pictured).
CONTENTS: (4) U-bolts with (8) each flat washers, lock washers, and Heavy Hex Head Nuts (ALL hot dipped galvanized).