Reviews Hose Fittings fitting Manufacture

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

  • 1Pc 6AN 25 feet of high-pressure fuel injection hose.
  • 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
  • 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
  • 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

  • [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
  • [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
  • [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
  • [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
  • [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check Stock

mistcooling Outdoor Misting System Kit-125ft-30Nozzles Cooling Kit-125, 125 Ft-30 Nozzle

  • Tubing: 3/8” OD Flexible PE Tubing, Max burst pressure is 300psi at 75°F, UV Resistant Flexible Tubing, Easy to Cut , Easy to bend. Nozzles: Nickel-plated brass button series, with stainless-steel Orifice, Standard 10/24” thread in, 0.015” OD Orifice, Rust-resistant fixed impeller pin.
  • Fittings: 3/8” OD, Compression Fittings, Beige Color to blend with most patios and backyards, Compression Type Fittings, Leak Proof, Fittings Included – Misting Tees, Misting End Elbow , Coupler, Compression Elbow for Corners , and 3/8 Compression Tees to split the mist line. Garden Hose Adapter:3/8” OD, Fits most Garden Faucets, With Filter, Washer to protect your nozzles..
  • ¾ Inch “Y” Connector – Hose Splitter : Dual shut-off valve controls water flow , Extra large , plastic handles for easy grip and turn , Easy-on swivel connector prevents hose kinks by allowing hose to turn , 2 Way Y Hose Splitter : The garden hose splitter has 2 Way connectors and 2 valves. After using the water splitter, it easily converts 1 spigot into 2 high flow water sources. It can make your garden life easier..
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

  • 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
  • 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
  • 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
  • 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check Stock

HZFJ 1PCS 1/2

  • ☛use☚Adapter for connecting hose or fittings of different types The garden tap hose connectors is precision engineered to be long lasting and leak free..
  • ☛Reminder☚Requires hose clamp( 1pcs included hose clamp).
  • ☛Texture☚The fittings are solid brass, so are much more hard wearing than plastic systems, and are rust resistant..
  • ☛100% AFTER SALE SEVICE☚We provide a return policy for you to ensure you 100% satisfaction. Would you have any questions to our product, please feel free to contact us and we will give you a quick response..
Check Stock

Delxo Garden Hose Splitter 2 Way Y Valve Metal Hose Connector,Solid Brass Hose Connector Garden Splitter Adapter Outdoor for Outdoor Faucet Timers,2 Rubber Hose Washers (Green)

  • ...2 Way Y Connector】The size of hose connector is 3/4” (US standard).
  • our hose splitter can match any American spigot. Hose connector 2 way can support 0.8Mpa water pressure. Choosing our garden hose connector, you will never worry about the wrong size for your spigot..
  • 【HEAVY DUTY BRASS FITTINGS】We carefully manufacture 3/4 inch brass connectors for garden hose that meet all American standards. They make the water hose splitter completely leak-proof and rust-proof and will not crack..
  • 【NO MORE LEAKS】NO MORE WATERSHED. Long and smooth thread with rubber ring at female end will make leaks a long forgotten experience. Touchy? No problem. Full rubber cover makes working with the splitter easy in all kinds of weather.It can make your garden life easier.Arrived with 4 washers..
  • 【QUALITY GUARANTEE】Every DELXO HOSE CONNECTOR is backed by premium quality, we offer a 100% satisfaction guarantee so you can buy with confidence. If for any problem about our Hose Splitter does not meet your current standards, ship it back to us for a replacement or for a full refund..
Check Stock

Mr. Gasket - 9710 Fuel Press Regultr W/Hdwr, Chrome

  • Fits 5/16 inch and 3/8 inch inside diameter fuel line.
  • Not for fuel injected systems, Max inlet pressure 9 PSI.
  • Adjusts fuel pressure from 1 to 6 pounds.
Check Stock

Valterra 20-Foot Dominator RV Sewer Hose Kit, Universal Sewer Hose for RV Camper, Includes 2 Attachable 10-Foot Hoses with Rotating Fittings, 90 Degree Clearview Sewer Adapter, and 4 Drip Caps

  • CAMPER SEWER HOSE KIT: The Dominator hose kit includes 2 collapsible 10-foot hoses with rotating fittings plus a 90 degree universal sewer adapter and 4 drip caps.
  • COMPACT STORAGE: Each hose collapses from 10 feet to 39 inches for convenient storage.
  • LEAK-PROOF: Pre-installed fittings with bayonet hooks ensure a leak-proof system and keep hose flat. Fittings rotate to keep hose flat.
  • CLEAR VIEW ADAPTER: 90-degree sewer fitting is transparent, allowing you to see when draining is complete. It fits 6 different sewer types with a gas-tight steal.
  • DURABLE MATERIAL: 23 mil thick hose material stays in shape when in use to ease the draining process.
Check Stock