Reviews Hose Elbow Fitting

Builder's Best 010155 Venting. Offset Elbow, Dryer, 4-1/2 In, 1 Cubic Centimeters

  • ☑PART NUMBER: Cenipar Dryer Vent Hose- Flexible Aluminum Foil Ducting Vent Hose(4 inch 8 feet) with 1 X 8 in Flexible Aluminum Foil Ducting Vent Hose&2 X metal Clamps. Cenipar STV-90 Drying Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTu....
Check Stock

WADEO Propane Elbow Adapter, Low Pressure 3/8' Male Flare Propane Elbow Fitting for Blackstone Tabletop Camping Grill 17 Inch and 22 Inch Portable Gas Griddle

  • Application: WADEO propane adapter conversion fitting with elbow is designed for the Blackstone 17 " and 22" tabletop griddles. It converts the 17 inch and 22 inch Blackstone Grill to a 3/8'' Male Flare propane extension hose..
  • Your Good Helper: The propane elbow adapter can directly link your 17 inch or 22 inch Blackstone Grill to a 3/8'' male flare propane extension hose, so that your Blackstone Griddle can easy to connect to the low pressure system on a travel trailer or camper..
  • Convenience: WADEO 90 degree elbow design is more suitable for your needs.You don't need to buy extra regulator for your grill. Saving cost and can move your grill easily..
  • Premium Material: Made of 100% brass, the fitting provides secure and safe connection from your grill to other appliances..
  • Attention: This adapter is only suitable for 17 inch and 22 inch Blackstone Grill and only used on low pressure system..
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 10 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap fit 4in vent ducting

  • ☑PART NUMBER: Cenipar Dryer Vent Hose- Flexible Aluminum Foil Ducting Vent Hose(4 inch 10 feet) with 1 X 10in Flexible Aluminum Foil Ducting Vent Hose&2 X metal Clamps. Cenipar STV-90 Drying Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 10 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on You....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 8 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap Fit 4in Vent Ducting

  • ☑PART NUMBER: Cenipar Dryer Vent Hose- Flexible Aluminum Foil Ducting Vent Hose(4 inch 8 feet) with 1 X 8 in Flexible Aluminum Foil Ducting Vent Hose&2 X metal Clamps. Cenipar STV-90 Drying Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTu....
Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
  • {Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....
Check Stock

Hide A Hose Central Vacuum White Inlet Kit with 40 Foot Hose

  • Central Vacuum 2x2 Fitting adapts for 2" Schedule 40 Plumbing Pipe.
Check Stock

BBTO 3/5 Inch AC Drain Hose Connector Elbow Fitting with Rubber Ring for Mini-Split Units and Window AC Unit and Air Conditioner Drain Hose with 5.2 Feet Long

  • Fit size: the diameter of drain hose connector elbow fitting is approx. 15 mm/ 0.6 inch, it will fit most air conditioner unit of mini-split units or window AC unit and universal air conditioning, the air conditioner drain hose has an inner diameter of 15 mm/ 0.6 inch and an outer diameter of 26 mm/ 1 inch, the length of hose is approx. 1.6 m/ 5.2 feet.
  • Material: the drain hose connector elbow is made of hard plastic material, enough durable to use in most weather conditions, the air conditioner drain hose is made of quality EVA and PE, not easy to age, and the thickened end of the drain hose is not easy to deform.
  • Leak-proof design: there is a rubber ring on the drain hose connector elbow to stop water from leaking from the side, the end of drain hose adopts thickened design that makes the connector more closely connected with the drain hose, not easy to fall off and eliminate the case of water leakage.
  • Practicality: the air-conditioning hose has good elasticity and resilience, it can be bent to shape as you need, it can be restored immediately after compression and has a long service life.
  • Note: the drain pipe should have a suitable angle of inclination when installed on the air conditioner, it's recommended to hang above the desired overflow area.
Check Stock

Pysrych 304 Stainless Steel Sanitary Hose Barb Fitting 1 Barbed x 1 Barbed 90 Degree Elbow

  • Sanitary 90 degree elbow hose barb fitting for a tight seal on hoses when used with a hose clamp (not included).
  • High pressure durable, stainless steel 304 for resistance to corrosion and high temperatures..
Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

Brass Hose Barb 90 Degree Elbow Fitting 5/16 Barbed x 5/16 Barbed Pack of 5

  • 90-degree elbow for connecting 5/16" barb hose to hose at an angle.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
  • All kinds of size, we can also provide customized order production solutions,including oem..
Check Stock