Reviews Hose Clamp Fastener

Mardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring

  • 【High-value Hose Removal Tool Set】 You will get 1 pcs hose removal pliers, 3 sizes hose clamp pliers(large, medium, small), 1 pcs fastener remover hook, 1 pcs V-type hose clamp removal hook & 1pc U-type hook, totally 7 pcs. In addition, quipped with a storage bag for convenient storage and carry. The complete tool kit for most practical size satisfy daily repair..
  • 【Hose Clamp Pliers 】 Made of durable nylon with excellent non-conductive and rust-proof.
  • Work great on close off flexible hoses without damage. Fully insulated to reduce risk of short circuit. Leaving your hands free to repair. A wide range of sizes to fit most applications. But NOT for use on rigid, reinforced, or high pressure lines..
  • 【Line Tube Hose Remover】High-grade materials ensure quality performance over the lifetime of the tool. Designed to facilitate quick and easy access into tight areas with flat and thin head. Remove Fuel, Vacuum or Heater Hoses from 5/32”to 1/2”(4mm to 14mm) diameter. Simple to use, push the vacuum hose or fuel line off the fitting or tube by sliver jaw..
  • 【Fastener Remover and Hook Set】The fastener remover is designed for removing automotive audio equipment, trim panels, door panels, window trim, emblems and metal clips without damaging upho....
Check Stock

Hoses Clamps Clamps Worm Worm Clamps Stainless Steel Large Hose Clamp Worm Drive Hose Clamps Adjustable Pipe Hose Clamp for Intercooler Pipe Plumbing Tube and Fuel Line 9 Pieces,11.5 Feet

  • DIY hose clamp: you can trim the hose clamp strap in length you want easily, then insert the fastener to make a suitable size you want, no more waste any materials.
  • You will get 1 piece adjustable hose clamp and 8 pieces fasteners, enough quantity to meet your different needs.
  • Longer hose clamp: the stainless steel duct clamp strap's total length is 11.5 feet, suitable to cut and get your long large hose clamp in different sizes, such as 12 inch, 14 inch, 16 inch and so on, the max size is 43 inch.
  • Durable material: the hose clamp and fasteners are made of quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use, which can be applied in outdoor and coastal areas.
  • Powerful function: adopts the open structure of inner and outer ring and the bolt is fastened, the worm drive pipe clamp is torsion-resistant, pressure-resistant, tightly locked and with large adjustment range, provides sealing performance and helps to solve the problem of liquid gas leakage.
  • Easy to use: you just need to loosen or tighten the screw of the hose clip by a screwdriver to adjust the size, attach the hose to the fitting tightly, and it can be applied to secure hoses, pipes, cable, tubes, etc..
Check Stock

Cimeton 304 Stainless Steel Adjustable Clamp Worm Gear Hose Clamps (19Ft Strap + 12 Strong Fasteners)

  • [Material]: The strap with fasteners are made of 304 stainless steel, it is anti-rust and corrosion-resistant. Solid and sturdy material ensures that the adjustable worm gear hose clamp is durable for use and reusable..
  • [Smooth Worm Gear Clamp]: Our fastener steel is more thicker and keeps strapping strong and heavy duty. It is not easy to bend when tightening the hose clamp. We use the best quality screws to clamp the strap tightly when turning the screwdriver..
  • [Simple Operation]: It is easy to operate, you only need a pliers and a screwdriver. You can use pliers to repeatedly bend the strap up and down and the strap will be easily cut off. Then you can make an adjustable hose clamp according to your needs..
  • [Cost and Work Effective]: Our hose clamps make it much more cost effective and flexible than ordering a variety of worm clamps. You can make band hose clamps according to your need, such as 10 inch, 12 inch and so on. It also effectively solve the problem of hose leakage and air leakage..
  • [Wide Applications]: It can be widely applied in automotive, industrial, boat, shield, electronic or home applications. It is also perfect for your duct collection dryer vent ductwork, garden fence, segmented wood turning project, pole mount bracket, automotive, ....
Check Stock

Adjustable Hose Clamps Band Clamp – 304 Stainless Steel Air Duct Clamp with 14 Fasteners, Large Worm Gear Hose Clamp for Automotive, Pipe, Plumbing, Tube and Fuel Line (34.5FT, 14PCS)

  • DIY HOSE CLAMP - There are different size tubes in your life, when you choose our Band Clamp set, you can easily trim the hose clamp strap in length you need, then insert the fastener to reach the desired size, no more waste of any materials.
  • MORE SIZE OPTIONS - 34.5 FT 304 stainless steel duct clamp strap with 14pcs fasteners, suitable to cut and get your long large pipe clamp in different sizes, such as 12 inches, 14 inches, 16 inches, 18 inches and so on.
  • EASY TO USE - The worm gear hose clamp adopts the open structure of the inner and outer ring, you just need to adjust the size with screwdriver to loosen or tighten, fix the band clamp on the joint to provide sealing performance. The large air hose clamp can be applied to big size mufflers, automobile exhaust pipe, cables, tubes and so on.
  • DURABLE MATERIAL - Hose clamp kit is made of 304 stainless steel, strong rust resistance, water resistance, corrosion resistance, oxidation resistance, durable, which can be applied indoor and outdoor, such as in kitchen, bathroom, garden, boat and so on.
  • 100% SATISFIED - If you have any questions or concerns with your product, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

Ripeng 200 Feet 40 Pieces Hoses Clamps, Worm Gear Clamps Stainless Steel Adjustable Duct Hose Large Clamp for Intercooler, Pipe, Plumbing, Tube and Fuel Line, 43 Inch

  • DIY Use: you can trim the hose clamp strap in length you want easily, then insert the fastener to make a suitable size you want, no more waste any materials.
  • You will get 2 piece adjustable hose clamp and 40 pieces fasteners, enough quantity to meet your different needs.
  • Suitable Size: the stainless steel duct clamp strap's total length is 100 feet, suitable to cut and get your long large hose clamp in different sizes, such as 12 inch, 14 inch, 16 inch and so on, the max size is 43 inch.
  • Reliable Material: the hose clamp and fasteners are made of quality 304 stainless steel, rust-proof, water proof, corrosion resistant, strong, and long lasting use, which can be applied in outdoor and coastal areas.
  • Wide Range of Uses: adopts the open structure of inner and outer ring and the bolt is fastened, the worm drive pipe clamp is torsion-resistant, pressure-resistant, tightly locked and with large adjustment range, provides sealing performance and helps to solve the problem of liquid gas leakage.
  • Convenient to Use: you just need to loosen or tighten the screw of the hose clip by a scr....
Check Stock

STEELSOFT DIY Hose Clamp System Kit, 9.8 FT Band + 6 Fasteners, 304 Stainless Steel Band Clamp Pipe Clamp Screw Clamp Metal Hose Clamp Large Adjustable for Ductwork, Pole Mount, Metal Strapping

  • DIY Hose Clamp: Nothing like the freedom to determine your own screw clamp sizes and still have enough material left, come in handy for other future projects. Trim the strap in suitable length, insert the fasteners and get small or large hose clamp options from 2.5'' to 37''max diameter..
  • Super Easy To Use: In our 2nd image, you can read the diagram manual! Only a snip/plier and a screwdriver needed. If you have no a snip on hand, please use a plier to bend the strap up and down repeatedly, it will be cut easily! Make an adjustable hose clamp as you want!.
  • Cost Effective: Our hose clamp kit makes it much more cost effective and flexible than ordering a variety of pre-made worm clamps. You can make band hose clamps in odd sizes such as 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, 24 inch, 30 inch and so on. Round and polygonal shapes are all available..
  • Smooth Worm Gear Clamp: Our fastener steel is thicker than competitions, which is not easily bent when making the hose clamp tight! We used the best quality screws which can grip the strap band tightly and keep smooth driving when turning the screwdriver! There is no hard pressure to apply!.
  • All 304 Stainless Hose Clamps: The strap roll 9.8 FT and 6 PCS fasteners are all made of real 304 SS, not 2....
Check Stock

SANIFANNY Liquid Hand Sanitizer Dispenser - Easy-Access Lid for Convenient Application - Portable Design with Belt Clip and Lanyard Hook - Medical-Grade Rubber Made in Canada Parent Pink

  • DIY Hose Clamp: You can trim the stainless strap at any length you want easily to adapt to different hoses, which can be used for pipe repairing in....
  • Large Hose Clamp: The hose clamp kit comes with a 7.87 feet long × 0.5inch wide metal strap and 6 fasteners in total. It’s a simple matter to make....
  • Durable Stainless Steel: The hose clips are made of high quality 304 stainless steel material that are corrosion-resistant, water-proof, rust-proof.....
  • Powerful Function: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, helps to solve the problem of liquid gas leakage.....
  • Easy to Use: You just need to attach the fastener into the pipe strap like picture 5, and then loosen or tighten the screw of the hose clip with a....
Check Stock

Marhynchus 100Pcs Hose Clamp Spring Flexible Sealing Fuel Pipe Carbon Steel Color Zinc Plating Hose clamp 6-22mm for Automobiles, Tractors Fastening Parts Hose and Cable Clamps

  • SAFE AND RELIABLE: These worm gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
  • SCOPE OF APPLICATION: This Hose Clamp is widely used in automobiles, tractors, forklifts, locomotives, ships, mining, petroleum, chemical, pharmaceutical, agricultural and other water, oil, steam, dust, etc., is a perfect connection fastener..
  • ADVANTAGE: Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage. These clamps are very tight, so you have no worry about fixing of the threads comes off.
  • PREMIUM MATERIAL: These Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
  • SIMPLE TO OPERATE: Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.
Check Stock

Hose Clamp Stainless Steel DIY 7.9 FT Metal Strapping with Holes + 6 Fasteners Large Adjustable Clamp Worm Gear Hose Clamps Pipe Clamp Band Clamp Air Ducting Clamp for Pipe Automotive Cable Tube

  • DIY Hose Clamp: You can trim the stainless strap at any length you want easily to adapt to different hoses, which can be used for pipe repairing in your house, garage, lawn, garden and so on..
  • Large Hose Clamp: The hose clamp kit comes with a 7.87 feet long × 0.5inch wide metal strap and 6 fasteners in total. It’s a simple matter to make large pipe clips, such as 12 inch, 14 inch, 16 inch and the max size is 29 inch.
  • Durable Stainless Steel: The hose clips are made of high quality 304 stainless steel material that are corrosion-resistant, water-proof, rust-proof. It is also fine to use outdoors and in coastal areas. Solid and sturdy material ensure the adjustable hose clamps last a long time for use, and can be reused..
  • Powerful Function: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, helps to solve the problem of liquid gas leakage. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
  • Easy to Use: You just need to attach the fastener into the pipe strap like picture 5, and then loosen or tighten the screw of the hose clip with a screwdriver to adjust the size, attach the hose to the fitting tightly. Perfect to apply in automotive, industrial, boat/marine, shield, electronic....
Check Stock

Hose Clamps 304 Stainless Steel Worm Clamp, 13 FT Large Hose Clamp Strap with 10 Fasteners, DIY Worm Gear Hose Clamps Adjustable Pipe Hose Clamp for Plumbing, Automotive And Mechanical Applications

  • DIY Hoses Clamp: you can trim the hose clamp strap in length you just need, then insert the fastener to make a suitable size you want, no more waste any materials.
  • You will get 1 piece adjustable band hose clamp and 10 pieces fasteners, to meet your different needs.
  • Durable Stainless Steel: The whole hose clamps (including the band, fasteners and screw) are built with 304 stainless steel, water-proof, rust-proof, corrosion-resistant, strong, durable, which can be applied in indoor and outdoor..
  • Easy to Use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly. Can be applied to secure hoses, pipes, cable, tubes, automotive, industrial, boat, etc..
  • Perfect Application: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, help to solve the problem of liquid gas leakage. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
  • Reusable Used: It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
Check Stock