Reviews Horizontal Welding Clamps

Strong Hand Tools, Nomad, Steel Welding Table, Three 1.1″ (28mm) Tabletop Slots, Adjustable Angle & Height, Casters, Retractable Guide Rails, Eccentric Leveling Foot, TS3020, Black

  • Three 1. 1″ (28mm) slots in the tabletop allow for insertion of clamps to reach any point on the table..
  • Tabletop tilts to three positions: Horizontal, 30°, and folded for mobility..
  • Two retractable, perpendicular steel guide rails can be used as guides, stops, or clamping edges..
  • Affordable, convenient welding and work table for the welding shop or home shop.
  • Tabletop height can be adjusted from 26″ to 32″ (660 – 810 mm)..
  • Table moves about the work area on 2 sturdy casters..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

  • 1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
  • 2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
  • 3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
  • 4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.
Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

MIKMAYTOO Small Quick Release Horizontal Toggle Clamp Hold Down Hand Tool 201A Hand Tool 60 lbs / 27kg (201-8PACK)

  • 【Packing type】8 PCS hand tool Toggle Clamp GH-201 non-slip red horizontal clamp quick release tool.
  • 【Holding Capacity】27Kg / 60Lbs, solid grip.
  • 【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • 【CLAMP SPECS】7.5 x 2.5 x 1.7cm/ 3" x 1" x 0.7"(L*W*H).
  • Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
  • 【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

YESWELDER Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Suspender Fixture Adjustable Pads Kit(4 Pcs)

  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time.
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply.
  • MAGNETIC HOLDERS▶ Magnets on the pad face only.
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps.
Check Stock