Reviews Horizontal Clamp

SOPOGER Archery Bow Bubble Level Tuning and Mounting String 3D Printing Compound Bow Sight Tuning Level Combo Tool Kit for Compound Bows(Black)

  • 【Optimal material & design】the bow leveling kit is made of impact resistant plastic,3D printing bow string level, high sensitivity bubble and easy to use.Using the archery tuning tools to check the vertical and horizontal of archery accessories.The clamp slot fixing screw is applicable to all kinds of bowstring, which is not easy to fall off when used..
  • 【Adjust the position of D-Loop】The main bow level is fixed on the bow string, and the sub bow level is placed on the arrow shaft.Adjust the position of D-ring according to whether the two level bubbles are horizontal..
  • 【Calibrate sight】Clamp the bow level on the sight and compare it with the horizontal bubble of the sight head to see if it is balanced..
  • 【Debugging the arrow rest】Clamp the bow level on the arrow rest to assist in adjusting the level of the installation part of the arrow rest.Hang the sub level on the arrow shaft to coordinate with the main level to assist in adjusting the arrow rest..
  • 【Packsge included】1 * Multifunctional Bow Bubble Level..
Check Stock

Overhead Phone Stand Multi-Purpose Desktop Video Mount Holder Compatible with iPhone Samsung Smartphone Cameras Webcams Light Panels for Nail Art Baking Crafting Ceramics Makeup Online Course

  • Overhead Phone Stand – Phone Tripod Arm with Phone Bracket and Ball-head Adapter, Excellent work for Nail Art, Baking, Crafting, Ceramics, Makeup,....
  • Horizontal Tripod Arm – Two Sessions for Extendable with 1/4’’-20 thread and Light Adapter, fit for mounting most video light, Phone....
  • Desk Clamp Stand - Height of stand can be expanded from 12.9 inch(32.7cm) to 22 inch(56cm), support desk thickness from 0.6 inch(1.5cm) to 3.4....
  • Desk Clamp Stand can connect with extendable tripod arm in Horizontal and Vertical both, enough for your special purpose.
  • What you get : 1x desk clamp stand, 1x extendable tripod arm, 1x ball-head adapter, 1x universal phone bracket.
Check Stock

Gibraltar GRS125C Road Series 36 Curved Bar Rack with Fix T Leg, RS Black Clamps

  • (1) 36 inch curved horizontal bar, (2) 30 inch vertical bars.
  • (1) GRSTLA T-Leg Clamp, (1) GRSMC Multi Clamp.
Check Stock

POWERTEC 20327 Quick Release Horizontal Toggle Clamp 201B - 300 lb Holding Capacity w Rubber Pressure Tip, 4PK

  • Includes: (4) horizontal quick release Toggle Clamp.
  • Function: an essential hand tool and addition to your jig assembly, delivering a dependable and secure non-slip grip on your work pieces, jigs and fixtures.
  • Design: a hold down Toggle Clamp constructed from cold-rolled carbon steel, possessing a low height design, a pressure adapter for easy depth adjustment and maximum clearance.
  • Holding capacity: Toggle Clamp can hold up to 300 lbs..
  • Clamp specs: base 1-7/16” x 1-5/16”| mounting slots 1/4” x 3/16” spaced 1” x 7/8” | bolt length, including rubber foot: 1-7/8”.
Check Stock

ATV Carburetor PZ20 Carb Set with Air Filter and Fuel Filter for 50cc 70cc 80cc 90cc 110cc 125cc TaoTao Honda Baja Coolster Quad Pit Bike Dirtbike Go Kart Moped Scooter

  • One carburetor replacement set include a manual choke valve pz20 carburetor, an air filter, a fuel filter, a fuel line, an air filter clamp ring, 4....
  • Made of premium quality material, built to strict quality control and up to OEM standard.
  • The air filter side diameter of the pz20 carb is about 32mm, need to use the clamp ring to clamp the 35mm air filter.
  • Fits Chinese 90cc 110cc 125cc horizontal engine ATVs and Go Karts with horizontal engine.
  • TaoTao or Honda, Baja, Coolster,NST, SunL,SSR and Kazuma's....
  • Depending on the motor vehicles condition, it may need some adjustment for the idle screw, pilot air screw or choke cable length to get the best....
Check Stock

POWERTEC 20326 Quick-Release Horizontal Toggle Clamp 225D - 500 lb Holding Capacity w Rubber Pressure Tip 4PK

  • Includes: (4) horizontal quick release Toggle Clamp.
  • Function: an essential hand tool and addition to your jig assembly, delivering a dependable and secure non-slip grip on your work pieces, jigs and fixtures.
  • Design: a hold down Toggle Clamp constructed from cold-rolled carbon steel, possessing a low height design, a pressure adapter for easy depth adjustment and maximum clearance.
  • Holding capacity: Toggle Clamp can hold up to 500 lbs..
  • Clamp specs: base 1-3/8” x 1-1/2” | Mounting slots 1/4” x 3/8” spaced 7/8” x 7/8” | bolt length, including rubber foot: 2-1/2”.
Check Stock

5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action

  • Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
  • Length of large toggle clamp foot including rubber 1.88".
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

DE-STA-CO 9522R Pneumatic Swing Clamp

  • DE-STA-CO's newest generation swing clamp with patented swing technology.
  • Unique design allows clamp arm to swing 90 degrees on a horizontal plane before moving downward on it's clamping stroke.
Check Stock

DE-STA-CO 9522L Pneumatic Swing Clamp

  • DE-STA-CO's newest generation swing clamp with patented swing technology.
  • Unique design allows clamp arm to swing 90 degrees on a horizontal plane before moving downward on it's clamping stroke.
Check Stock

Brocraft Canoe Anchor Lock System/Anchor System with Aluminum clamp

  • G Clamp made by marine grade 6061-T6 aluminum with CNC processing.
  • 360 degrees rotation,Not include anchor and Rope.
  • Large clamp Max. 2-1/2 " . adjustable horizontal and vertical fit different surface.
  • Perfect for pontoons, kayaks , canoe and small boats.
Check Stock